1/2in
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Size: 1/2in 4in 14 AWG
Qty:
Qty:
closeout
$22.25 MSRP
$
16.12
Qty:
Qty:
Part #:503702
- 1/2" Shank Diameter Eyebolts Shoulder Pattern
Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
Each lot is tested and inspected to insure conformance to specifications
Available with UNC Class 2A thread only
Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially. A steel washer or spacer may be required for proper seating
To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
Qty:
Part #:834-600580420
- BE 75-16 (600580420) Drill Cardboard box
Robust die cast aluminum gear housing for optimum heat dissipation and durability
Rotating carbon brush bridge for maximum performance even in counter-clockwise operation for removing stubborn screws
Vario (V)-electronics for working at customized speeds to suit various application materials.
Metabo S-automatic torque limiting clutch mechanical decoupling of the drive for safe working should the drill stop unexpectedly.
Spindle with hexagonal recess for screwdriver bits for working without chuck
Suitable for powerful drilling of larger diameters and for stirring thick liquid-like materials
$
350.61
Qty:
Part #:134-J74470P
- Proto 1/2" Drive Impact Universal Joint
Tight tolerances for snug fit on fastener.
Used wherever powered drive tools are used to install or remove fasteners.
Designed to withstand the high torque and force associated with impact tools in repetitive application.
Position at appropriate angle to turn fasteners where obstructions prevent a straight application.
Ball and spring design which allows for a 30° working angle.
Smooth 360° rotation.
Qty:
Part #:504822
- Hex End L-Wrenches - ProGuard&trade Finish
Chamfered tool tips eliminate burrs and help tools seat in screw head
Sharp corners transfer more torque to the screw and reduce stripping
Precision machined for ease of use and superior fit
Qty:
Part #:504837
- Hex End L-Wrenches - ProGuard&trade Finish
Chamfered tool tips eliminate burrs and help tools seat in screw head
Sharp corners transfer more torque to the screw and reduce stripping
Precision machined for ease of use and superior fit
Qty:
Part #:805466
- 1/2 in. Impact Wrench with Rocker Switch and Detent Pin Socket Retention
Delivers 300 ft-lbs of torque for faster installations. The 1/2" Impact Wrench with Rocker Switch and Detent Pin Socket Retention is designed to maximize your productivity. Its powerful 7.0-amp motor drives a unique impact mechanism that produces high torque and 1800 RPM for installation or loosening of bolts in less time. It features a detent pin to securely retain sockets or adapters, and a rocker switch for quick selection of forward or reverse. The ergonomically shaped handle has a soft cushioned grip, and provides a well-balanced and controllable feel to this lightweight tool.
Qty:
Part #:810220
- 1/2" Drive SAE 1/2" Standard Length Hex Bit Socket
&bull High-polished chrome finish socket cleans easily
&bull Two piece design allows bits to be replaced easily
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Part #:805305
- M18&trade Compact 1/2" Hammer Drill/Driver (Tool Only)
The most Compact Hammer Drill/Driver in its class is more powerful than the competition. Built with a Milwaukee® 4-Pole frameless motor, the M18&trade Compact 1/2" Hammer Drill/Driver delivers 500 in-lbs of torque and up to 1,800 RPM. At only 7-3/4" length, this drill driver allows you access to the tightest work spaces. An all-metal gear case and 1/2" metal chuck provide maximum durability, even on the most challenging jobsites. REDLINK&trade Intelligence provides advanced protection in abusive situations and manages the tool's temperature to provide maximum life.
Qty:
closeout
$18.00 MSRP
$
10.57
Part #:511846
- CLOSEOUTS Only 23 Left!
-
1/2" Wire Rope Clip, Forged Carbon Steel, Galvanized(Discontinued being replaced by 490-M250)
Base is Drop-Forged Carbon Steel
Hot Galvanized to ASTM A-153 to Resist Rust and Corrosion
U-Bolts Are colored Blue for Identification Purposes and Use Heavy Duty Hex Nuts (UNC-2A)
Designed to Meet Federal Specifications, FF-C-450, Type 1, Class 1
Designed to Meet or Exceed All Requirements of ASME B30.26 Including Identification, Ductility, Design Factor and Temperature
Permanently Marked with Size and Manufacturer
Sizes 1/4" and Above Marked with USA and Date Code
Sizes 1/8" Through 1-1/4" Are Supplied Bagged and Unassembled
Note See Application and Warning Information
Qty:
Qty:
Part #:810157
- Adjustable Wrench 4" Chrome
&bull Chrome Finish
&bull 4"
Qty:
Part #:810314
- 6" Center Punches
Pierces or marks work by indentation for starting pilot drills in metal or other materials
Qty:
Part #:501682
- Slug-Buster® 1/2" Conduit Size Replacement Punch
Made in USA
Alignment Markings improve punching accuracy and productivity
Punches and dies are clearly marked for quick part identification
Qty:
Qty:
Displaying: 25 - 48 of 175 Matching Items