1/4 in
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Size: 1/4 in 1/4in-1in 1/8in .050in - 3/8in
Part #:522125
- Technical Specs
Item Socket Set
Standard Socket Count/Style (14) 12-Point
Deep Socket Count/Style (12) 6-Point, (2) 12-Point
Deep Socket Style/Size 1 in, 1/2 in, 11/16 in, 11/32 in, 13/16 in, 3/4 in, 3/8 in, 5/16 in, 5/8 in, 7/16 in, 7/8 in, 9/16 in, Deep 12-Point 15/16 in, Deep 6-Point 1/4 in
Flex Socket Count/Style 0
Socket Size Range 1/4 in to 1 in
Drive Type Hand
Drive Size 3/8 in
Measurement Type SAE
Sockets Included (1) 1 in Deep 12-Point, (1) 1 in Standard 12-Point, (1) 1/2 in Deep 6-Point, (1) 1/2 in Standard 6-Point, (1) 1/4 in Deep 6-Point, (1) 1/4 in Standard 6-Point, (1) 11/16 in Deep 6-Point, (1) 11/16 in Standard 6-Point, (1) 11/32 6PT, (1) 11/32 in Deep 6-Point, (1) 13/16 in Deep 6-Point, (1) 13/16 in Standard 6-Point, (1) 15/16 in Deep 12-Point, (1) 15/16 in Standard 12-Point, (1) 3/4 in Deep 6-Point, (1) 3/4 in Standard 6-Point, (1) 3/8 in Deep 6-Point, (1) 3/8 in Standard 6-Point, (1) 5/16 in Deep 6-Point, (1) 5/16 in Standard 6-Point, (1) 5/8 in Deep 6-Point, (1) 5/8 in Standard 6-Point, (1) 7/16 in Deep 6-Point, (1) 7/16 in Standard 6-Point, (1) 7/8 in Deep 6-Point, (1) 7/8 in Standard 6-Point, (1) 9/16 in Deep 6-Point, (1) 9/16 in Standard 6-Point
Qty:
Qty:
Qty:
Part #:511840
- 1/8" Wire Rope Clip, Electro-Galvanized
If Used on Coated Cable, Remove the Coating From the Assembly Area
Follow Assembly Instructions
Qty:
Part #:504830
- Hex End L-Wrenches - ProGuard&trade Finish
Chamfered tool tips eliminate burrs and help tools seat in screw head
Sharp corners transfer more torque to the screw and reduce stripping
Precision machined for ease of use and superior fit
Qty:
Part #:459-10907
- Bondhus® Balldriver® L-Wrench KeysProduct DetailsBall end inserts into a screw at a 25° angle and allows natural hand and wrist movementSaves time by quickly funneling tool into screwSuperior ball end strength and working angleWorks in hard-to-reach places.
Qty:
Part #:502627
- Hex End L-Wrenches - ProGuard&trade Finish
Chamfered tool tips eliminate burrs and help tools seat in screw head
Sharp corners transfer more torque to the screw and reduce stripping
Precision machined for ease of use and superior fit
$
12.30
Qty:
Part #:507131
- Ball End L-Wrenches - BriteGuard&tradeFinish
Ball End inserts into screw at a 25° angle
Ball End saves time by quickly funneling tool into screw
25° angle allows natural hand and wrist movement
Superior Ball End strength and working angle
Works in hard to reach places
Qty:
Part #:504353
- Stubby Ball End L-Wrenches - ProGuard&tradeFinish
Fits into tight spaces standard hex keys can not
Eliminates the need to trim and file the short arm
Tighter inside radius means full smooth entry into screw head
Chamfered short arm eliminates burrs
Ball End inserts into a screw at a 25° angle
$
32.64
Qty:
Part #:459-16737
- Stubby Ball End L-Wrenches - BriteGuard&tradeFinish
Fits into tight spaces standard hex keys can not
Eliminates the need to trim and file the short arm
Tighter inside radius means full smooth entry into screw head
Chamfered short arm eliminates burrs
Ball End inserts into a screw at a 25° angle
Qty:
Part #:511842
-
Benefits and Features
Meets the dimensional and finish requirements of FF-C-450
Drop forged saddle
Forged saddles include size, USA and CM logo
Drop-forged base for superior function and toughness
Specifiations
Bolt 5/16in-18
Torque 15ft-lbs
Qty:
Part #:810266
- 4 3/4" Pin Punches
For driving out and removing already loosened pins and keys after initial movement by a solid or starter punch
Qty:
Part #:509245
- EXPOSED RATCHET BOLT THREADER SETS&bull No. 00-RB Capacity 1/4"-1".&bull All matched threader sets include button die heads, ratchet assembly (00-R) and ratchet handle.Button dies can be reversed to thread close to bolt shoulder or head.
Qty:
Part #:805457
- Pipe Dies for Machine Die Heads
Qty:
Part #:134-J9521
-
Drive into end of broken pipe or fitting.
Use tap holder or wrench on extractor to turn out broken part.
Size stamped on extractor refers to drill bit size to be used with that extractor.
Qty:
closeout
$43.28 MSRP
$
24.70
Part #:511954
- CLOSEOUTS Only 4 Left!
-
1/4&rdquo x 4&rdquo Hook & Eye Turnbuckle, Forged Carbon Steel, Galvanized
Drop-Forged Carbon Steel
Galvanized to Meet ASTM A-153 Specifications
5 to 1 Design Factor
Meets Design Requirements of ASTM F1145, Type 1, Grade 1, Class F
IMPORTANT Instructions For Use
Turnbuckles are Designed for a Static Load
In Loads Where There is Vibration, Lock Nuts (Jam Nuts) Should be Used to Prevent the Connection from Turning or Loosening
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:802764
- Steel Number Stamp Sets&bull Number sets contain 9 pieces 0 thru 9(the 6 is used as a 9)&bull Crowned striking surface ensures full forceto the center of the stamp & textured shankprovides firm easy grip
Qty:
Qty:
Part #:521272
- Ball End L-Wrenches - ProGuard&tradeFinish
Ball End inserts into screw at a 25° angle
Ball End saves time by quickly funneling tool into screw
25° angle allows natural hand and wrist movement
Superior Ball End strength and working angle
Works in hard to reach places
$
21.47
Qty:
Part #:521274
- ProHold® Tip Ball End L-Wrenches - ProGuard&tradeFinish
Holds screw tight on the tool EVERY TIME
Button is non-magnetic
Super smooth rotational action, with no interference from the ProHold® button
Tool strength is not compromised by the ProHold® button
Qty:
Part #:509270
- PIPE EXTRACTORS&bull RIDGID® pipe extractors make easy work of removing broken threaded ends of pipe, pipe plugs andfittings. Available for schedule 40 and 80 pipe.&bull Each is plainly marked showing drill size used when solid ends of plugs and fittings must be drilled toreceive extractor.
Qty:
Qty:
Part #:812737
- Steel Letter Stamp Sets
&bull Letter sets contain 27 pieces A thru Z plusampersand (&)&bull Tempered shanks for extra safety
Qty:
Qty:
Displaying: 1 - 24 of 40 Matching Items