1/4 in
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Size: 1/4 in 1/8in 9in .050in - 3/8in
Part #:806806
-
1/4" Quick Link, Steel, Zinc Plated, #7350
For Fast and Easy Connections Between Two Lengths of Chain
DO NOT EXCEED THE WORKING LOAD LIMIT
Do Not Use for Overhead Lifting or Hoisting
Do Not Use to Support Human Weight, for Playground or Athletic Equipment, or as a Safety Device
Qty:
Qty:
Part #:504406
- Lineman's Pliers, New England Nose, 9-Inch
&bull High-leverage design. Rivet is closer to the cutting edge for 46-percent greater cutting and gripping power than other plier designs&bull Hot-riveted joint ensures smooth action and no handle wobble&bull Induction hardened cutting knives for long life&bull Streamlined design with sure-gripping, cross-hatched knurled jaws&bull Unique handle tempering helps absorb the ''snap'' when cutting wire&bull Precision-hardened plier head for on-the-job toughness&bull Plastic-dipped handles for comfort and ease of identification&bull ''Handform'' handles for full gripping and cutting power
Qty:
Part #:511840
- 1/8" Wire Rope Clip, Electro-Galvanized
If Used on Coated Cable, Remove the Coating From the Assembly Area
Follow Assembly Instructions
Qty:
Part #:504830
- Hex End L-Wrenches - ProGuard&trade Finish
Chamfered tool tips eliminate burrs and help tools seat in screw head
Sharp corners transfer more torque to the screw and reduce stripping
Precision machined for ease of use and superior fit
Qty:
Part #:459-10907
- Bondhus® Balldriver® L-Wrench KeysProduct DetailsBall end inserts into a screw at a 25° angle and allows natural hand and wrist movementSaves time by quickly funneling tool into screwSuperior ball end strength and working angleWorks in hard-to-reach places.
Qty:
Part #:502627
- Hex End L-Wrenches - ProGuard&trade Finish
Chamfered tool tips eliminate burrs and help tools seat in screw head
Sharp corners transfer more torque to the screw and reduce stripping
Precision machined for ease of use and superior fit
$
12.30
Qty:
Part #:507131
- Ball End L-Wrenches - BriteGuard&tradeFinish
Ball End inserts into screw at a 25° angle
Ball End saves time by quickly funneling tool into screw
25° angle allows natural hand and wrist movement
Superior Ball End strength and working angle
Works in hard to reach places
Qty:
Part #:504353
- Stubby Ball End L-Wrenches - ProGuard&tradeFinish
Fits into tight spaces standard hex keys can not
Eliminates the need to trim and file the short arm
Tighter inside radius means full smooth entry into screw head
Chamfered short arm eliminates burrs
Ball End inserts into a screw at a 25° angle
$
32.64
Qty:
Part #:459-16737
- Stubby Ball End L-Wrenches - BriteGuard&tradeFinish
Fits into tight spaces standard hex keys can not
Eliminates the need to trim and file the short arm
Tighter inside radius means full smooth entry into screw head
Chamfered short arm eliminates burrs
Ball End inserts into a screw at a 25° angle
Qty:
Part #:511842
-
Benefits and Features
Meets the dimensional and finish requirements of FF-C-450
Drop forged saddle
Forged saddles include size, USA and CM logo
Drop-forged base for superior function and toughness
Specifiations
Bolt 5/16in-18
Torque 15ft-lbs
Qty:
Part #:810266
- 4 3/4" Pin Punches
For driving out and removing already loosened pins and keys after initial movement by a solid or starter punch
Qty:
Part #:805457
- Pipe Dies for Machine Die Heads
Qty:
closeout
$362.00 MSRP
$
263.08
Part #:503781
- CLOSEOUTS Only 1 Left!
- 2.25 max HP, 7"/9" Sander
This 13 amp, 5,500 RPM, 2.25 maximum horsepower sander provides high performance and durability for moderately heavy jobs. Sold without accessories, a 7 or 9 inch backing pad and disc can be attached allowing this tool to be used for removing paint or rust from metal, plastic and fiberglass surfaces. Spiral bevel gears transfer maximum torque for heavy duty jobs. Spring loaded recessed spindle lock assists in easy accessory changes. This tool can be converted to a grinder by purchasing either a 7 inch or 9 inch guard and wheel which are easily attached to the tool. Grinding applications remove more material and may be used to shape metal.
Qty:
Part #:134-J9521
-
Drive into end of broken pipe or fitting.
Use tap holder or wrench on extractor to turn out broken part.
Size stamped on extractor refers to drill bit size to be used with that extractor.
Qty:
closeout
$43.28 MSRP
$
24.70
Part #:511954
- CLOSEOUTS Only 4 Left!
-
1/4&rdquo x 4&rdquo Hook & Eye Turnbuckle, Forged Carbon Steel, Galvanized
Drop-Forged Carbon Steel
Galvanized to Meet ASTM A-153 Specifications
5 to 1 Design Factor
Meets Design Requirements of ASTM F1145, Type 1, Grade 1, Class F
IMPORTANT Instructions For Use
Turnbuckles are Designed for a Static Load
In Loads Where There is Vibration, Lock Nuts (Jam Nuts) Should be Used to Prevent the Connection from Turning or Loosening
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:802764
- Steel Number Stamp Sets&bull Number sets contain 9 pieces 0 thru 9(the 6 is used as a 9)&bull Crowned striking surface ensures full forceto the center of the stamp & textured shankprovides firm easy grip
Qty:
Qty:
Part #:507877
- Lineman's Square Nose Pliers, 9-Inch
&bull High-leverage design. Rivet is closer to the cutting edge for 46-percent greater cutting and gripping power than other plier designs&bull Hot-riveted joint ensures smooth action and no handle wobble&bull Induction hardened cutting knives for long life&bull Streamlined design with sure-gripping, cross-hatched knurled jaws&bull Unique handle tempering helps absorb the ''snap'' when cutting wire&bull Precision-hardened plier head for on-the-job toughness&bull Plastic-dipped handles for comfort and ease of identification&bull ''Handform'' handles for full gripping and cutting power&bull Custom, US-made tool steel
Qty:
Part #:806750
- High-Leverage Side-Cutters
&bull High-leverage design. Rivet is closer to the cutting edge for 46-percent greater cutting and gripping power than other plier designs&bull High-leverage design. Rivet is closer to the cutting edge for 46-percent greater cutting and gripping power than other plier designs&bull Induction hardened cutting knives for long life&bull Streamlined design with sure-gripping, cross-hatched knurled jaws&bull Unique handle tempering helps absorb the ''snap'' when cutting wire&bull Precision-hardened plier head for on-the-job toughness&bull ''Handform'' handles for full gripping and cutting power&bull Custom, US-made tool steel
Qty:
Part #:501614
- Heavy Duty Lineman's Pliers, 9-Inch
&bull High-leverage design. Rivet is closer to the cutting edge for 46-percent greater cutting and gripping power than other plier designs&bull Heavy-duty, thicker dipped handles are more comfortable and easier to grab with gloved hands&bull Hot-riveted joint ensures smooth action and no handle wobble&bull Induction hardened cutting knives for long life&bull Streamlined design with sure-gripping, cross-hatched knurled jaws&bull Precision-hardened plier head for on-the-job toughness&bull Unique handle tempering helps absorb the ''snap'' when cutting wire&bull ''Handform'' handles for full gripping and cutting power&bull Custom, US-made tool steel
Qty:
Qty:
Part #:521272
- Ball End L-Wrenches - ProGuard&tradeFinish
Ball End inserts into screw at a 25° angle
Ball End saves time by quickly funneling tool into screw
25° angle allows natural hand and wrist movement
Superior Ball End strength and working angle
Works in hard to reach places
$
21.47
Qty:
Part #:521274
- ProHold® Tip Ball End L-Wrenches - ProGuard&tradeFinish
Holds screw tight on the tool EVERY TIME
Button is non-magnetic
Super smooth rotational action, with no interference from the ProHold® button
Tool strength is not compromised by the ProHold® button
Qty:
Displaying: 1 - 24 of 41 Matching Items