1/4in x 5/16in
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Size: 1/4in x 5/16in 1-7/8in 8in 12in
Part #:500112
- 12" Professional SAE Measuring Wheel
Suitable for measuring vertical, horizontal or curved surfaces, the large Crescent Lufkin® Professional SAE Measuring Wheel displays surface dimensions in meters for quick, accurate distance calculations. It features a 12-inch wheel with a rubber tire for superb traction on the uneven terrain of jobsites or long indoor expanses. The analog counter dial calibrated to the wheel counts to 10,000 meters before rolling over to 0.
Qty:
closeout
$36.39 MSRP
$
24.38
Qty:
Part #:501143
- 8" Adjustable Black Oxide Wrench - Carded
Crescent Adjustable Wrenches feature a large knurl for easy adjustment and a tight jaw fit. Its hex jaw design helps reduce slippage and tightly grips the fastener for solid, secure operation, while the corrosion-resistant black oxide finish helps prevent rusting. A wide handle design provides comfort and reduces fatigue during extended use, ideal for both pros and do-it-yourself enthusiasts.
Qty:
Qty:
Part #:803884
- Description
CHANNELLOCK® Straight Jaw Tongue & Groove Pliers are built to last with a PERMALOCK® fastener to eliminate nut and bolt failure, patented reinforcing edge to minimize stress breakage and laser-hardened teeth to provide a better, longer lasting grip. CHANNELLOCK® Straight Jaw Tongue & Groove Pliers are made in USA and forged from high carbon U.S. steel that is specially coated for ultimate rust prevention.
The ORIGINAL STRAIGHT JAW Tongue & Groove Pliers provide a strong, versatile grip for use in both directions
RELIABLE PERMALOCK® fastener eliminates nut and bolt failure with increased joint strength
STRONG 90-degree, laser-hardened teeth for superior grip and longevity
FORGED high carbon U.S. steel for maximum strength and durability is specially coated for ultimate rust prevention.
UNDERCUT tongue and groove won&rsquot slip
CHANNELLOCK BLUE® grips for comfort
100% MADE IN USA
Qty:
Part #:506900
- Description
CHANNELLOCK® 442 12" Tongue & Groove Pliers feature a unique v-jaw design that creates more points of contact on round stock and tubing. These pliers are built to last with a PERMALOCK® fastener to eliminate nut and bolt failure, patented reinforcing edge to minimize stress breakage and laser-hardened teeth to provide a better, longer lasting grip. CHANNELLOCK® V-JAW Pliers are made in USA and forged from high carbon U.S. steel that is specially coated for ultimate rust prevention.
V-JAWS for more points of contact on round stock and tubing
RELIABLE PERMALOCK® fastener eliminates nut and bolt failure with increased joint strength
STRONG 90-degree, laser-hardened teeth for superior grip and longevity
FORGED high carbon U.S. steel for maximum strength and durability is specially coated for ultimate rust prevention.
UNDERCUT tongue and groove won&rsquot slip
CHANNELLOCK BLUE® grips for comfort
100% MADE IN USA
Qty:
Part #:802246
- Description
The CHANNELLOCK® 8WCB 8" WIDEAZZ® Adjustable Wrench features a super wide jaw opening, providing the capacity of a 12-inch wrench in a lightweight, compact 8-inch adjustable wrench supporting larger nuts and bolt sizes. The combination of a smart and comfortable tapered handle design with CODE BLUE® grips, precise 4-thread knurl and minimal head width greatly improves performance in confined spaces. CHANNELLOCK® Adjustable Wrenches are made in Spain and forged from rugged chrome vanadium steel.
WIDEAZZ® jaws are up to 60% wider than a standard wrench of the same size
LONGER jaws grip better and are up to 22% THINNER than a standard wrench of the same size, providing greater access in tight spaces
MEASUREMENT SCALES are laser engraved (in. on front, mm. on reverse) and handy for sizing nuts, pipe and tube diameters
PRECISE 4-thread knurl improved adjustment accuracy
OPTIMAL head width and non-protruding jaws allow accessibility for hard to reach applications
CODE BLUE® comfort grips
RUGGED Chrome Vanadium steel construction
CHROME finish for ultimate rust prevention
Made to CHANNELLOCK® specifications in Spain.
Qty:
Part #:505945
- OLD Lang Plier Snap Ring 1434 :
Qty:
closeout
$64.85 MSRP
$
43.45
Part #:504410
- CLOSEOUTS Only 3 Left!
- (Discontinued being replaced by AC212VS)
Qty:
Qty:
Part #:808146
- HEAVY-DUTY STRAIGHT PIPE WRENCHES&bull Straight Pipe Wrenches have a sturdy, ductile-iron housing andan I-beam handle with a full floating forged hook jaw, featuringself-cleaning threads with replaceable hook and heel jaws.&bull Heavy-duty pipe wrenches comply with federal specificationsGGG-W65IE, Type II, Class A.
8", 1" Pipe Capacity
Qty:
Part #:510182
- Pliers, Needle Nose Side-Cutters, 8-Inch
&bull Heavier design for greater cutting power&bull Extended handles provide added reach and leverage&bull Slim head design for working in confined areas&bull Induction hardened cutting knives for long life&bull Hot-riveted joint ensures smooth action and no handle wobble&bull Plastic-dipped handles for comfort and ease of identification&bull Custom, US-made tool steel
Qty:
Part #:806753
- Diagonal Cutting Pliers, High-Leverage, 8-Inch
&bull High-leverage design rivet is closer to the cutting edge for 36-percent greater cutting power than other plier designs&bull Short jaws and beveled cutting edges permit close cutting of wire&bull Induction-hardened cutting knives for long life&bull Hot-riveted joint ensures smooth action and no handle wobble&bull Plastic-dipped handles for comfort and ease of identification&bull Custom, US-made tool steel
Qty:
Part #:509041
- Proto Satin Adjustable Wrench 8-7/64"
Feature and Benefits
Satin finish provides corrosion resistance and a slip resistant grip.
Extra wide jaw capacity.
Square jaw opening provides strength and tight fit.
Rugged I-beam style handle and reinforced stress areas radius corner design.
Qty:
Qty:
Part #:500550
- 3/4" Drive Extensions
&bull Chrome plating provides increased protection from rust and corrosion
&bull Ball and spring socket retention
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Part #:808150
- HEAVY-DUTY STRAIGHT PIPE WRENCHES&bull Straight Pipe Wrenches have a sturdy, ductile-iron housing andan I-beam handle with a full floating forged hook jaw, featuringself-cleaning threads with replaceable hook and heel jaws.&bull Heavy-duty pipe wrenches comply with federal specificationsGGG-W65IE, Type II, Class A.
12",2" Pipe Capacity
Qty:
Part #:500504
- 3/4" Drive 12-Point SAE 1-7/8" Shallow Socket
&bull SUPERTORQUE® lobular openings for greater turning power without deforming the fastener
&bull Designed for quick engagement on both 6 and 12 point fasteners
Qty:
Displaying: 1 - 24 of 81 Matching Items