1-5/8in
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Length: 1-5/8in 4in 9in 25ft
Qty:
Qty:
Qty:
Qty:
Part #:729-48-22-0325
- 25ft Compact Wide Blade Magnetic Tape Measure
Our Compact Wide Blade Tape Measures have up to 15' of reach allowing you to quickly take measurements. The tape is wear and impact-resistant with nylon blade protection and an additional anti-tear coating on the first 6&rdquo of the blade, reducing tape tear. Built to withstand the jobsite, the compact measuring tapes are constructed with a 5-point reinforced frame for impact resistance.
Qty:
Part #:507216
- (10)Tb 9In Prof Torpedo Lvl
High contrast e-BAND&trade vials highlight the edge of the bubble
High contrast vial surrounds improve vial visibility
3 vials - plumb, level and 45°
V-Groove working edge for accurate alignment on pipe or conduit
Aluminum frame with top read window
Strong magnetic edge
Made in the USA
Limited lifetime warranty
Qty:
Part #:510610
- 1" x 25" P1000 Series Yellow Clad A5 Blade Power Return Tape Measure
Crescent Lufkin® built its reputation on durability and these new tapes are no exception. The P1000 Series cases are made of tough ABS plastic, modified for increased strength and impact resistance. Every blade is protected with a clear-coat that exceeds ASTM standards for abrasion and corrosion resistance.
Qty:
Part #:306243
- Insulated 1/8-Inch Slotted Screwdriver, 4-Inch
Perfect for working in control boxes or other terminal block applications where insulated tools are necessary
1000V Rated for safety
Meets or exceeds IEC 60900 2012, ASTM F1505-10
Durable, two-layer, molded insulation to meet or exceed all ASTM and IEC standards for insulated tools
Made in USA with custom US-made tool steel
Cushion-Grip&trade handle for superior torque and comfort
Made in the USA
Protect yourself when working near an energized source. Clearly marked with the official 1000-volt rating symbol, Klein insulated tools exceed IEC 60900 and ASTM F1505 standards for insulated tools. Two layers of insulation provide protection against electric shock. Perfect for working in control boxes or other terminal block applications where insulated tools are necessary.
Qty:
Part #:508146
- 3/16-Inch Cabinet Tip Screwdriver 4-Inch
&bull Narrow cabinet tip permits blade access where space is limited&bull Cushion-Grip handle for greater torque and comfort&bull Premium chrome-plated for smooth feel and corrosion resistance&bull Internal flanges inside handle provide solid, twist-resistant blade anchor&bull Special heat-treated shafts&bull Precision-machined tip for exact fit&bull Tip-Ident® quickly identifies the screwdriver type and tip orientation&bull Meets or exceeds applicable ASME / ANSI specifications
Qty:
Part #:306147
- 1/4-Inch Cabinet Tip Insulated Screwdriver, 4-Inch
1000V rated for safety
Durable, flame-retardant, molded dual-layer insulation
Custom US-made tool steel
Cushion-Grip&trade handle for superior torque and comfort
Made in the USA
Protect yourself when working near an energized source. Clearly marked with the official 1000-volt rating symbol, Klein insulated tools exceed IEC 60900 and ASTM F1505 standards for insulated tools. Two layers of insulation provide protection against electric shock. Built to handle the tough jobs with ease.
Qty:
Part #:306161
- Insulated Screwdriver, #2 Phillips Tip, 4-Inch
1000V rated for safety
Durable, two-layer, molded insulation to meet or exceed all ASTM and IEC standards for insulated tools
Cushion-Grip&trade handles for greater torque and comfort
Custom US-made steel
Made in USA
The Klein Tools #2 Insulated Phillips Head Screwdriver provides safe electrical insulation up to 1,000-Volt. This screwdriver features 2 layers of insulation around a steel construction to ensure dielectric protection and impact resistance. Cushion-Grip&trade handle ensures excellent torque and comfort.
Qty:
Part #:459-15389
- Hex End T-Handles - ProGuard&trade Finish
Solid steel handles
Welded handle/blade connection
Ergonomic handle design
Flywheel effect saves time
Smooth, non-porous handle coating
Handle coating extends along blade
Qty:
Part #:459-15390
- Hex End T-Handles - ProGuard&trade Finish
Solid steel handles
Welded handle/blade connection
Ergonomic handle design
Flywheel effect saves time
Smooth, non-porous handle coating
Handle coating extends along blade
Qty:
Qty:
Qty:
Qty:
closeout
Part #:511960
- CLOSEOUTS Only 1 Left!
-
3/4" x 6" Jaw & Jaw Turnbuckle, Forged Carbon Steel, Galvanized(Discontinued being replaced by TB108-J-J-HDG)
Drop-Forged Carbon Steel
Galvanized to Meet ASTM A-153 Specifications
5 to 1 Design Factor
Meets Design Requirements of ASTM F1145, Type 1, Grade 1, Class G
Jaws on Sizes 1/4&rdquo Through 5/8&rdquo Have Hex Head Bolt and Nut
Jaws on Sizes 3/4&rdquo Through 1-1/2&rdquo Have Cotter Key and Bolt
IMPORTANT Instructions For Use
Turnbuckles are Designed for a Static Load
In Loads Where There is Vibration, Lock Nuts (Jam Nuts) Should be Used to Prevent the Connection from Turning or Loosening
DO NOT EXCEED THE WORKING LOAD LIMIT
$
110.24
Qty:
closeout
Part #:511961
- CLOSEOUTS Only 5 Left!
-
3/4" x 9" Jaw & Jaw Turnbuckle, Forged Carbon Steel, Galvanized(Discontinued being replaced by TB108-9-J-J)
Drop-Forged Carbon Steel
Galvanized to Meet ASTM A-153 Specifications
5 to 1 Design Factor
Meets Design Requirements of ASTM F1145, Type 1, Grade 1, Class G
Jaws on Sizes 1/4&rdquo Through 5/8&rdquo Have Hex Head Bolt and Nut
Jaws on Sizes 3/4&rdquo Through 1-1/2&rdquo Have Cotter Key and Bolt
IMPORTANT Instructions For Use
Turnbuckles are Designed for a Static Load
In Loads Where There is Vibration, Lock Nuts (Jam Nuts) Should be Used to Prevent the Connection from Turning or Loosening
DO NOT EXCEED THE WORKING LOAD LIMIT
$
96.04
Qty:
closeout
$43.28 MSRP
$
24.70
Part #:511954
- CLOSEOUTS Only 4 Left!
-
1/4&rdquo x 4&rdquo Hook & Eye Turnbuckle, Forged Carbon Steel, Galvanized
Drop-Forged Carbon Steel
Galvanized to Meet ASTM A-153 Specifications
5 to 1 Design Factor
Meets Design Requirements of ASTM F1145, Type 1, Grade 1, Class F
IMPORTANT Instructions For Use
Turnbuckles are Designed for a Static Load
In Loads Where There is Vibration, Lock Nuts (Jam Nuts) Should be Used to Prevent the Connection from Turning or Loosening
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
closeout
$28.99 MSRP
$
26.06
Part #:500221
- CLOSEOUTS Only 21 Left!
- Crescent Lufkin 25 ft. Tape Measures, 1" Blade (Discontinued being replaced by PHV1425N)
Qty:
Qty:
Qty:
Part #:306066
- Terminal Block Screwdriver, 1/8-Inch Cabinet, TB-DIN
Precision machined tip provides exact fit for terminal block screws
1/8-Inch (3.2 mm) cabinet tip is up to 19-Percent stronger than competitors
Tip provides 76-Percent higher torque value than the required ASME B107 Standard
Cushion-Grip&trade handle offers greater torque comfort
Made in USA
Qty:
Part #:806776
- Coated 1/4-Inch Cabinet Screwdriver, 4-Inch Shank
&bull Plastic coated for circuit protection only. NOT INSULATED&bull Special plastic coating resists cutting, cracking, and chipping&bull Thin coating permits use in confined areas&bull Cushion-Grip handle for greater torque and comfort&bull Premium chrome-plated for smooth feel and corrosion resistance&bull Internal flanges inside handle provide solid, twist-resistant blade anchor&bull Special heat-treated shafts&bull Precision-machined tip for exact fit&bull Meets or exceeds applicable ASME / ANSI specifications&bull Tip-Ident® quickly identifies the screwdriver type and tip orientation
Qty:
Displaying: 1 - 24 of 40 Matching Items