1-7/16in
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Size: 1-7/16in 9/32in 10-3/8in XL
Qty:
Part #:510817
- Country of Origin US :
Qty:
Part #:134-J5446H
-
Proto® 6 Point Sockets are ideal for use on stubborn or damaged fasteners, and also on fasteners made from soft materials.
The TorquePlus&trade design is a high performance drive configuration which allows for quick and easy socket engagement to the fastener flats, not the corners.
The TorquePlus&trade configuration employs a radius-corner design, shifting contact area and stress away from the fastener corners and distributing contact stresses over a large area of the socket, minimizing slippage.
The TorquePlus&trade internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fasteners.
Qty:
Qty:
closeout
$41.25 MSRP
$
27.64
Part #:506620
- CLOSEOUTS Only 7 Left!
-
9/32" Quik-Alloy® Sling Hook w/Latch, Grade 100, Painted Green
For Use with Grade 80/100 Chain Slings
4 to 1 Design Factor
Meet or Exceed All Requirements of ASME B30.9 and B30.10
100% Proof Tested in Accordance with ASTM A952
Additionally Hallmarked with "USA" and Date Code
Made in the USA
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:503872
- General-Purpose Belt, X-Large
&bull Made of strong, heavy-duty leather&bull Removable single-tongue buckle held is by two heavy-duty snaps&bull Belt is 1-1/2-Inch (38 mm) wide&bull Waist size 38- to 46-Inch
Qty:
Part #:507527
- Electricians Leather Tool Belt, X-Large
&bull Made of strong, heavy-duty leather&bull Includes tool loops and chain-tape thong&bull Extra Large Fits sizes 46-Inches to 54-Inches (1168 mm to 1372 mm)&bull Belt is 1-1/2-Inches (38 mm) wide
Qty:
Part #:500390
- 1-7/16" 12-Point SAE SUPERCOMBO® Combination Wrench
&bull SUPERCOMBO® open end has specially designed grooves that direct wrench force away from fastener corners
&bull SUPERTORQUE® box opening design allows application of higher torque without rounding or deforming hex fastener points. No contact is made at the corners. Instead, wrenching forces are placed on the flat surfaces behind the points
&bull Meets or exceeds AErospace specification AS 954 for 12 point fasteners (as defined by AS 870) to provide accurate torque/tension relationship for precision application
&bull May be used on all common hex (6 point) fasteners with considerable advantage over conventional box end wrenches to increase both hand tool flexibility and economy
&bull Box and open end openings are identical
Qty:
Qty:
Qty:
Part #:506514
- Country of Origin US:
Qty:
Part #:134-J5346H
-
Proto® 6 Point Sockets are ideal for use on stubborn or damaged fasteners, and also on fasteners made from soft materials.
The TorquePlus&trade design is a high performance drive configuration which allows for quick and easy socket engagement to the fastener flats, not the corners.
The TorquePlus&trade configuration employs a radius-corner design, shifting contact area and stress away from the fastener corners and distributing contact stresses over a large area of the socket, minimizing slippage.
The TorquePlus&trade internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fasteners.
Qty:
Part #:505666
- 1-7/16" 12-Point SAE Offset Pattern Box End Striking Wrench
Striking face wrenches are designed to be struck by a hammer on the anvil area in order to loosen frozen fasteners or to set and tighten fasteners
Anvils are proportional to opening sizes. Special heat treating provides maximum durability for long life
Offset handle is close to head to provide clearance in confined areas
Williams' expanded line of offset striking face wrenches, up to 4-1/4", provides the most extensive line on the market
Specifically engineered to hold up under the most rigorous industrial use
Qty:
Part #:506697
- 3/4" Drive SAE 1-7/16" Impact Deep Socket
SUPERTORQUE lobular openings for greater turning power without deforming the fastener
Designed for maximum engagement on 6 point fasteners
Suitable for use with pneumatic and electric impact wrenches
Specially heat treated for impact use to provide long life, safety, and durability
Qty:
Part #:507862
- 3/4" Drive SAE 1-7/16" Impact Shallow Socket
SUPERTORQUE lobular openings for greater turning power without deforming the fastener
Designed for maximum engagement on 6 point fasteners
Suitable for use with pneumatic and electric impact wrenches
Specially heat treated for impact use to provide long life, safety, and durability
Qty:
Part #:812862
- 3/8" Drive 4 & 8-Point SAE 9/32" Shallow Socket
&bull SUPERTORQUE® lobular openings for greater turning power without deforming the fastener
&bull 8 point sockets are designed for quick engagement on 4 point fasteners
Qty:
Part #:500496
- 3/4" Drive 12-Point SAE 1-7/16" Shallow Socket
&bull SUPERTORQUE® lobular openings for greater turning power without deforming the fastener
&bull Designed for quick engagement on both 6 and 12 point fasteners
Qty:
Part #:805357
- 1/4" Drive 6-Point SAE 9/32" Shallow Socket
&bull SUPERTORQUE® lobular openings for greater turning power without deforming the fastener
&bull Designed for maximum engagement on 6 point fasteners
Qty:
Part #:502077
- 1/2" Drive 12-Point SAE 1-7/16" Shallow Socket
&bull SUPERTORQUE® lobular openings for greater turning power without deforming the fastener
&bull Designed for quick engagement on both 6 and 12 point fasteners
Qty:
Part #:729-49-59-2144
- 1-7/16" x 2" Annular Cutter
Dual alternating tooth geometry and thin-wall construction help Milwaukee&rsquos Annular Cutter cut up to 15% faster than the competition. With 20% thinner walls, the cutter displaces less material for the same size hole, giving you fast, burr-free holes in anything from sheet metal to thick steel plate.Milwaukee&rsquos proprietary high-speed steel with three hardness zones minimizes breakage and helps the bit last longer. It comes with a 3/4&rdquo Weldon shank, which is ideal for use with most small magnetic drill presses and large magnetic drill presses with the correct arbor.
Qty:
Part #:134-J7346H
- Country of Origin US:
Qty:
Part #:729-302B-20XL
- M12&trade Heated Hoodie
Powered by M12&trade REDLITHIUM&trade Battery Technology, Milwaukee® M12&trade Heated Hoodies use carbon fiber heating elements to create and distribute heat to the chest and back. A one-touch LED controller allows users to select from three heat settings, delivering ideal heat for any environment. The new Quick-Heat function allows users to feel heat 3X faster than previous hoodies and market competitors. Combining a durable cotton/polyester exterior with a waffle weave thermal lining, the hoodie provides a versatile three-season solution to keep heat in and allow users to shed bulky layers.
Qty:
Part #:134-J5346CF
- Country of Origin US:
Qty:
Displaying: 1 - 23 of 23 Matching Items