1/8in
Hand and Power Tools


Displaying: 1 - 24 of 71 Matching Items
71 Items
View:
Active Filters :
Part #:502912
3/16&rdquo Cold Shut, Steel, Zinc Plated Connections for Chain and Attachments When Using Cold Shuts with Chain, Use One Size Larger Than Chain Size With A Hammer, Drive the Open End Through the Cold Shut Eye. Peen the Extended End to Prevent Opening Order Unit is "Each" Note Cold Shuts Should Not Be Reused After Closure Has Been Made DO NOT EXCEED THE WORKING LOAD LIMIT Do Not Use for Overhead Lifting or Hoisting
$2.09 MSRP $ 1.22
Qty:
add to cart
Part #:504832
Hex End L-Wrenches - ProGuard&trade Finish Chamfered tool tips eliminate burrs and help tools seat in screw head Sharp corners transfer more torque to the screw and reduce stripping Precision machined for ease of use and superior fit
$0.49 MSRP $ 0.39
Qty:
add to cart
Part #:511841
3/16" Wire Rope Clip, Electro-Galvanized If Used on Coated Cable, Remove the Coating From the Assembly Area Follow Assembly Instructions
$1.95 MSRP $ 1.13
Qty:
add to cart
Part #:511840
1/8" Wire Rope Clip, Electro-Galvanized If Used on Coated Cable, Remove the Coating From the Assembly Area Follow Assembly Instructions
$1.51 MSRP $ 0.88
Qty:
add to cart
Part #:504830
Hex End L-Wrenches - ProGuard&trade Finish Chamfered tool tips eliminate burrs and help tools seat in screw head Sharp corners transfer more torque to the screw and reduce stripping Precision machined for ease of use and superior fit
$0.59 MSRP $ 0.50
Qty:
add to cart
Part #:511937
3/16" Wire Rope Thimble, Electro-Galvanized If Used on Coated Cable, Remove the Coating From the Assembly Area Follow Assembly Instructions
$1.44 MSRP $ 0.84
Qty:
add to cart
Part #:508012
3/16" Grade 30 Proof Coil Chain, Zinc Plated, 250' per Round Pail Excellent Low Carbon Steel Chain for General Purpose Applications Frequently Used for Fabricating Tow Chains, Binding and Logging Chains, Marine and Other General Applications Standard Finish Zinc Plated or Galvanized Hallmarking "C3" and "USA" on 5/16" and Larger Proof Tested Design Factor 4 to 1 Packaged in Pails, Order Unit is "Each" Made in the USA Do Not Use for Overhead Lifting DO NOT EXCEED THE WORKING LOAD LIMIT
$439.98 MSRP $ 294.78 PAIL
Qty:
add to cart
Part #:459-10907
Bondhus&reg Balldriver&reg L-Wrench KeysProduct DetailsBall end inserts into a screw at a 25&deg angle and allows natural hand and wrist movementSaves time by quickly funneling tool into screwSuperior ball end strength and working angleWorks in hard-to-reach places.
$1.45 MSRP $ 1.22
Qty:
add to cart
Part #:508146
3/16-Inch Cabinet Tip Screwdriver 4-Inch &bull Narrow cabinet tip permits blade access where space is limited&bull Cushion-Grip handle for greater torque and comfort&bull Premium chrome-plated for smooth feel and corrosion resistance&bull Internal flanges inside handle provide solid, twist-resistant blade anchor&bull Special heat-treated shafts&bull Precision-machined tip for exact fit&bull Tip-Ident&reg quickly identifies the screwdriver type and tip orientation&bull Meets or exceeds applicable ASME / ANSI specifications
$11.52 MSRP $ 8.98
Qty:
add to cart
Part #:502805
3/16" Grade 30 Proof Coil Chain, Zinc Plated, 250' per Round Pail Excellent Low Carbon Steel Chain for General Purpose Applications Frequently Used for Fabricating Tow Chains, Binding and Logging Chains, Marine and Other General Applications Standard Finish Zinc Plated or Galvanized Hallmarking "C3" and "USA" on 5/16" and Larger Proof Tested Design Factor 4 to 1 Packaged in Pails, Order Unit is "Each" Made in the USA Do Not Use for Overhead Lifting DO NOT EXCEED THE WORKING LOAD LIMIT
$2.15 MSRP $ 1.25
Qty:
add to cart
Part #:508135
Country of Origin US:
$100.19 MSRP $ 63.13
Qty:
add to cart
Part #:810310
10" Long Taper Punches Designed for aligning the holes in metal pieces through which rivets, bolts, or screws will be inserted Not intended for driving pins as punch may become stuck in work Also called line-up aligning or drift punches
$22.60 MSRP $ 14.75
Qty:
add to cart
Part #:810266
4 3/4" Pin Punches For driving out and removing already loosened pins and keys after initial movement by a solid or starter punch
$11.40 MSRP $ 7.44
Qty:
add to cart
Part #:500171
3/8" Drive Standard Length Hex Bit Sockets, SAE, High-Polioshed Chrome Finish &bull All tools are professional quality, made of high-grade chrome vanadium steel &bull Sockets feature SUPERTORQUE&reg lobular openings for greater turning power without deforming the fastener &bull Metal tool box made for years of rugged use
$16.85 MSRP $ 10.99
Qty:
add to cart
Part #:805457
Pipe Dies for Machine Die Heads
$168.50 MSRP $ 153.34
Qty:
add to cart
Part #:509955
Country of Origin US:
$9.59 MSRP $ 6.05
Qty:
add to cart
Part #:134-J9521
Drive into end of broken pipe or fitting. Use tap holder or wrench on extractor to turn out broken part. Size stamped on extractor refers to drill bit size to be used with that extractor.
$11.42 MSRP $ 7.20
Qty:
add to cart
closeout
Part #:506610
CLOSEOUTS Only 4 Left!
$32.19 MSRP $ 21.57
Qty:
add to cart
Part #:802764
Steel Number Stamp Sets&bull Number sets contain 9 pieces 0 thru 9(the 6 is used as a 9)&bull Crowned striking surface ensures full forceto the center of the stamp &amp textured shankprovides firm easy grip
$20.00 MSRP $ 17.20
Qty:
add to cart
Part #:510262
3/16-Inch Cabinet Tip Screwdriver 3-Inch &bull Narrow cabinet tip permits blade access where space is limited&bull Premium chrome-plated for smooth feel and corrosion resistance&bull Internal flanges inside handle provide solid, twist-resistant blade anchor&bull Special heat-treated shafts&bull Precision-machined tip for exact fit&bull Tip-Ident&reg quickly identifies the screwdriver type and tip orientation&bull Cushion-Grip handle for greater torque and comfort&bull Meets or exceeds applicable ASME / ANSI specifications
$11.24 MSRP $ 7.95
Qty:
add to cart
Part #:506632
Coated Flathead Screwdriver, 3/16-Inch Cabinet Tip &bull Plastic coated for circuit protection only. NOT INSULATED&bull Special plastic coating resists cutting, cracking, and chipping&bull Thin coating permits use in confined areas&bull Cushion-Grip handle for greater torque and comfort&bull Premium chrome-plated for smooth feel and corrosion resistance&bull Internal flanges inside handle provide solid, twist-resistant blade anchor&bull Special heat-treated shafts&bull Precision-machined tip for exact fit&bull Meets or exceeds applicable ASME / ANSI specifications&bull Tip-Ident&reg quickly identifies the screwdriver type and tip orientation
$17.80 MSRP $ 12.19
Qty:
add to cart
Part #:506354
Coated 3/16-Inch Cabinet Tip Screwdriver, 6-Inch &bull Plastic coated for circuit protection only. NOT INSULATED&bull Special plastic coating resists cutting, cracking, and chipping&bull Thin coating permits use in confined areas&bull Cushion-Grip handle for greater torque and comfort&bull Premium chrome-plated for smooth feel and corrosion resistance&bull Internal flanges inside handle provide solid, twist-resistant blade anchor&bull Special heat-treated shafts&bull Precision-machined tip for exact fit&bull Meets or exceeds applicable ASME / ANSI specifications&bull Tip-Ident&reg quickly identifies the screwdriver type and tip orientation
$18.92 MSRP $ 13.24
Qty:
add to cart
$18.18 MSRP $ 11.45
Qty:
add to cart
Part #:805455
Steel Letter Stamp Sets &bull Letter sets contain 27 pieces A thru Z plusampersand (&amp)&bull Tempered shanks for extra safety
$60.00 MSRP $ 51.60
Qty:
add to cart
 
Displaying: 1 - 24 of 71 Matching Items