1/8in
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Size: 1/8in 3/4in 8in 12in
Part #:811720
- 8" Combination Slip Joint Pliers Multiple parallel jaw positions are locked in to proper groove for superior non-slip performance
&bull Serrated jaws for maximum gripping power
&bull Polished heads resist rust and corrosion, extending the tool life
&bull Shear type wire cutter extends tool use
Qty:
Qty:
Part #:500292
- 12" Steel Strap Cutter
The 12 inch Steel Strap Cutter cuts heavy steel strapping, especially for use loading and unloading pallets from freight, cars, trucks, and ships.
Qty:
Part #:504825
- Hex End L-Wrenches - ProGuard&trade Finish
Chamfered tool tips eliminate burrs and help tools seat in screw head
Sharp corners transfer more torque to the screw and reduce stripping
Precision machined for ease of use and superior fit
Qty:
Qty:
Part #:805457
- Pipe Dies for Machine Die Heads
Qty:
closeout
Part #:511960
- CLOSEOUTS Only 1 Left!
-
3/4" x 6" Jaw & Jaw Turnbuckle, Forged Carbon Steel, Galvanized(Discontinued being replaced by TB108-J-J-HDG)
Drop-Forged Carbon Steel
Galvanized to Meet ASTM A-153 Specifications
5 to 1 Design Factor
Meets Design Requirements of ASTM F1145, Type 1, Grade 1, Class G
Jaws on Sizes 1/4&rdquo Through 5/8&rdquo Have Hex Head Bolt and Nut
Jaws on Sizes 3/4&rdquo Through 1-1/2&rdquo Have Cotter Key and Bolt
IMPORTANT Instructions For Use
Turnbuckles are Designed for a Static Load
In Loads Where There is Vibration, Lock Nuts (Jam Nuts) Should be Used to Prevent the Connection from Turning or Loosening
DO NOT EXCEED THE WORKING LOAD LIMIT
$
110.24
Qty:
closeout
Part #:511961
- CLOSEOUTS Only 5 Left!
-
3/4" x 9" Jaw & Jaw Turnbuckle, Forged Carbon Steel, Galvanized(Discontinued being replaced by TB108-9-J-J)
Drop-Forged Carbon Steel
Galvanized to Meet ASTM A-153 Specifications
5 to 1 Design Factor
Meets Design Requirements of ASTM F1145, Type 1, Grade 1, Class G
Jaws on Sizes 1/4&rdquo Through 5/8&rdquo Have Hex Head Bolt and Nut
Jaws on Sizes 3/4&rdquo Through 1-1/2&rdquo Have Cotter Key and Bolt
IMPORTANT Instructions For Use
Turnbuckles are Designed for a Static Load
In Loads Where There is Vibration, Lock Nuts (Jam Nuts) Should be Used to Prevent the Connection from Turning or Loosening
DO NOT EXCEED THE WORKING LOAD LIMIT
$
96.04
Qty:
Qty:
Part #:811840
- 1/2" Drive SAE 3/4" Impact Shallow Socket
&bull SUPERTORQUE® lobular openings for greater turning power without deforming the fastener
&bull Designed for maximum engagement on 6 point fasteners
&bull Suitable for use with pneumatic and electric impact wrenches
&bull Specially heat treated for impact use to provide long life, safety, and durability
Qty:
Part #:134-J9521
-
Drive into end of broken pipe or fitting.
Use tap holder or wrench on extractor to turn out broken part.
Size stamped on extractor refers to drill bit size to be used with that extractor.
Qty:
Qty:
Qty:
Part #:511047
- 12" Adjustable Black Oxide Wrench - Carded
Crescent Adjustable Wrenches feature a large knurl for easy adjustment and a tight jaw fit. Its hex jaw design helps reduce slippage and tightly grips the fastener for solid, secure operation, while the corrosion-resistant black oxide finish helps prevent rusting. A wide handle design provides comfort and reduces fatigue during extended use, ideal for both pros and do-it-yourself enthusiasts.
Qty:
closeout
$42.71 MSRP
$
24.38
Part #:511877
- CLOSEOUTS Only 5 Left!
-
3/4" Connecting Link, Forged Carbon Steel, Galvanized, 5 Pcs per Box
Drop-Forged Heat-Treated Carbon or Alloy Steel
Standard Finish is Self-Colored or Galvanized to Meet ASTM A-153 Specifications
4 to 1 Design Factor
For Proper Closure, Peen the Prongs to Fill the Hole of the Mating Half as Much as Possible
Meets Design Requirements of Federal Specification RR-C-271D, Type II
Make Sure the Connecting Link Used is the Same Size as the Components Being Joined. e.g., a 3/8 in. Connecting Link is Used with 3/8 in. Chain
Any Assembly Made Using Connecting Links Should be Rated at the Working Load Limit of the Weakest Component.
The Working Load Limit of Connecting Links is Based on a Straight Line Pull. Any Side or Shock Loading Will Significantly Reduce the Actual Working Load Limit.
NEVER Re-Use a Connecting Link
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:511945
-
3/4" Heavy Wire Rope Thimble, Galvanized
Standard Material Hot Rolled, Mild Steel
Galvanized
Imported
A Thimble is a Wear Pad That Protects the Rope From Cuts, Kinking and Abrasions. Always Use An Appropriate Thimble When Making An Eye in a Rope.
When it is Necessary to Open a Thimble to Insert a Fitting, Make Sure the Points are Properly Aligned When the Thimble is Closed. Inspect Carefully for Cracks.
Thimbles ARE NOT Designed for Load Carrying Purposes Therefore Working Load Limits Have Not Been Established.
Qty:
Part #:506054
- Description
CHANNELLOCK® High Leverage End Cutting Pliers feature Xtreme Leverage Technology (XLT&trade) which makes cutting easier than ever. By positioning the rivet closer to the cutting edge, considerably less force is required to cut than other high leverage designs. State-of-the-art laser heat treating offers a strong and consistent pattern across the cutting edge for increased strength and longevity. These pliers also offer a slimmer, lighter, and better-balanced design for maximum performance and accessibility. CHANNELLOCK® End Cutting Pliers are made in USA and forged from high carbon U.S. steel that is specially coated for ultimate rust prevention.
XTREME LEVERAGE TECHNOLOGY (XLT&trade) increases performance and reduces hand fatigue
LASER heat-treated cutting edges perform better and last longer
PRECISION-machined knife and anvil style cutting edges ensure perfect mating for superior performance and longevity
FORGED high carbon U.S. steel for maximum strength and durability is specially coated for ultimate rust prevention
CHANNELLOCK BLUE® grips for comfort
100% MADE IN USA
Qty:
Part #:506282
- Description
The CHANNELLOCK® 908 8.25" Wire Strippers are precision-machined and designed to last against the rigors of everyday use. Includes a precision-ground cutter, screw shears, common stripping hole sizes and a lean nose design for pulling and looping wire. CHANNELLOCK® Wire Strippers are 100% made in USA.
PRECISION cutting edges cleanly cut and strip AWG 10-22 wire
CRIMPER for use on insulated and non-insulated connections and terminals
SCREW SHEARS 10-24, 6-32, 8-32, 10-32, 4-40
COAX Cable crimper
LEAN pliers nose pulls and loops wire
LASER-ETCHED gauge indicators
CHANNELLOCK BLUE® grips for comfort
100% MADE IN USA
Qty:
Part #:802764
- Steel Number Stamp Sets&bull Number sets contain 9 pieces 0 thru 9(the 6 is used as a 9)&bull Crowned striking surface ensures full forceto the center of the stamp & textured shankprovides firm easy grip
Qty:
Qty:
closeout
$55.08 MSRP
$
41.30
Part #:510380
- CLOSEOUTS Only 1 Left!
- Lineman's Pliers, 8-Inch
&bull Sure-gripping, cross-hatched knurled jaws&bull Induction hardened cutting knives for long life&bull Hot-riveted joint ensures smooth action and no handle wobble&bull Unique handle tempering helps absorb the ''snap'' when cutting wire&bull Precision-hardened plier head for on-the-job toughness&bull Plastic-dipped handles for comfort and ease of identification&bull ''Handform'' handles for full gripping and cutting power&bull Custom, US-made tool steel
Qty:
Part #:510183
- Pliers, Needle Nose Side Cutters with Stripping, 8-Inch
&bull Cleanly strips 12 AWG solid wire&bull Heavier design for greater cutting power&bull Extended handles provide added reach and leverage&bull Slim head design for working in confined areas&bull Induction hardened cutting knives for long life&bull Hot-riveted joint ensures smooth action and no handle wobble&bull Plastic-dipped handles for comfort and ease of identification&bull Custom, US-made tool steel
Qty:
Part #:500995
- Diagonal Cutting Pliers, Heavy-Duty, High-Leverage, 8-Inch
&bull Cuts ACSR, screws, nails and most hardened wire&bull High-leverage design. Rivet is closer to the cutting edge for 36-percent greater cutting power than other plier designs&bull Short jaws and beveled cutting edges permit close cutting of wire&bull Induction hardened cutting knives for long life&bull Hot-riveted joint ensures smooth action and no handle wobble&bull Plastic-dipped handles for comfort and ease of identification&bull Custom, US-made tool steel
Qty:
Qty:
Displaying: 49 - 72 of 165 Matching Items