1/8in
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Size: 1/8in 3/8in 5/32in 11/16in
Part #:509776
- Country of Origin US:
Qty:
Qty:
Qty:
Part #:503686
- 3/8" Shank Diameter Eyebolts Plain Pattern
Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
Each lot is tested and inspected to insure conformance to specifications
Available with UNC Class 2A thread only
Plain pattern eyebolts must never be used to lift an angular load
Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
Qty:
Part #:810266
- 4 3/4" Pin Punches
For driving out and removing already loosened pins and keys after initial movement by a solid or starter punch
Qty:
Part #:810267
- 5" Pin Punches
For driving out and removing already loosened pins and keys after initial movement by a solid or starter punch
Qty:
Part #:811886
- 3/8" Drive SAE 5/32" Standard Length Hex Bit Socket
&bull All tools are professional quality, made of high-grade chrome vanadium steel
&bull Sockets feature SUPERTORQUE® lobular openings for greater turning power without deforming the fastener
&bull Metal tool box made for years of rugged use
Qty:
Part #:807974
- 11/16 x 18 Nail Eater® Bit
Improved cutting edge provides 30% longer life span
Patented new design for improved cutting and cleaner holes
Self-feeding screw point draws bit through wood
Unique patented design cutting angle - smoother starts, reduced cutting loads
Made of super tough, heat-treated steel
Cuts through nails and provides longer life
Shorty bits - for working in tight places, yet still can go through three abutting 2 x 4s
See Bit Extensionsif more length is required
P.O.P packaged
Qty:
Qty:
Qty:
Qty:
Part #:810243
- 5 1/2" Cold Chisels
The most commonly used chisels in the chisel line
For cutting, shaping and removing metal softer than the cutting edge of the chisel
Qty:
Part #:501195
- Plain Bearing Design, wide applications- Drill press, wood lathes, portable drills. 1/2in (13mm) Capacity, JACOBS K32 Key.
Qty:
Part #:507004
-
3/8" Clevis Slip Hook, Grade 43, Zinc Plated
Forged Steel
Grade 43
UPC Tagged
Slip Hooks Are Designed to Allow Chain to Slip Through the Hook
Hooks are Sized by the Material Diameter of the Chain That They Engage. Make Sure the Hook Size and Chain Diameter are Compatible Before Attaching to Load
Qty:
Qty:
Part #:510954
-
Setting tool HVU HIS Setting tool Mechanical setting tool HVU HIS 3/8" #45969
$
98.74
Qty:
Part #:808210
- Model No. 11-R 3/8" NPT Alloy RH
Qty:
closeout
$241.00 MSRP
$
180.75
Part #:510336
- CLOSEOUTS Only 1 Left!
- 3/8" Magnum® Drill, 0-1200 RPM with All Metal Chuck and QUIK-LOK® cord
Get maximum versatility in this 3/8&rdquo workhorse drill. The 3/8&rdquo Magnum® Drill with All-Metal Chuck and QUIK-LOK® Cord features a powerful motor for optimal speed and torque for hole saws, twist bits and light fastening jobs. The all-metal gear case and diaphragm provide high durability on the jobsite. The ergonomic, tactile grip and two-finger trigger optimize your comfort and balance. Add the convenience and extra grip strength of the GRIP-LOK&trade chuck and a heavy-duty detachable cord, and you have unchallenged value.
Qty:
Part #:729-2758-22
- M18 FUEL&trade with ONE-KEY&trade 3/8" Compact Impact Wrench w/ Friction Ring Kit (Discontinued, Replaced by 2758-20)
The M18 FUEL&trade 3/8&rdquo Compact Impact Wrench features a POWERSTATE&trade Brushless Motor that delivers 0-2,500 RPM and 0-210 ft-lbs of fastening torque with constant power output under heavy load. REDLINK PLUS&trade Intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. REDLITHIUM&trade Batteries deliver more work per charge and more work over the life of the pack than competitive batteries on the market.Compatible with ONE-KEY&trade, this is the industry&rsquos first Impact Wrench that wirelessly connects to a smart phone to Customize, Track and Manage a tool&rsquos performance and location. Unlimited Tool Customization allows you to connect to the tool and access predetermined set-ups for specific fasteners and materials, or have complete control over output speed and power for the specific application at hand. Once the desired output performance is reached, the custom profile is then saved to the memory of the tool and the connection to the smart phone is no longer necessary. The tool&rsquos memory supports up to 4 custom profiles that can be easily accessed with the touch of a button on the tool. Your custom profiles are also saved in the cloud so that they can be accessed at any time. Integrated Tool Tracking, also available through ONE-KEY&trade, provides full visibility to how and where tools are being used across your network of jobs and users. The app will track all ONE-KEY&trade compatible devices within 100 ft range of your phone. By building the functionality into the tool, not the battery, all devices are trackable even if the battery is not charged or on the tool. The app will automatically keep records of the last time a tool was within range of the app, allowing you to pinpoint missing tools quicker and increase accountability of your crew. If you&rsquore having trouble locating a lost tool, expand your search with the help of anybody with the ONE-KEY&trade app. By opting in, when any phone with the app comes within 100 ft of your tool, you will receive an updated location.
Qty:
Part #:805457
- Pipe Dies for Machine Die Heads
Qty:
Qty:
Part #:802763
- Steel Letter Stamp Sets 27 Piece Set&bull Letter sets contain 27 pieces A thru Z plusampersand (&)&bull Tempered shanks for extra safety
Qty:
Part #:810313
- 5" Center Punches
Pierces or marks work by indentation for starting pilot drills in metal or other materials
Qty:
Part #:134-J9521
-
Drive into end of broken pipe or fitting.
Use tap holder or wrench on extractor to turn out broken part.
Size stamped on extractor refers to drill bit size to be used with that extractor.
Qty:
Displaying: 25 - 48 of 176 Matching Items