1/8in
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Size: 1/8in 6in 7in 10in
Part #:511253
- COO CN Prop 65 :
- WARNING
Qty:
closeout
$25.67 MSRP
$
18.60
Part #:511464
- CLOSEOUTS Only 5 Left!
- 10" Nail Puller (Discontinued being replaced by NPWC10)
Tackle your next renovation or demolition project with the latest innovations from Crescent. Our new tools are designed around powerful innovations that allow the user to attack projects from the best angle, adjust your tool to fit the task at hand, and just get the job done faster and easier than before. This series of tools offers a wide array of demolition and renovation tools. All Crescent pry bars have precision ground edges that make it easier to access tight spaces and help minimize damage to finished areas, as well as a crow bar end with a nail puller slot for standard crow bar use. Durable two-tone dual material grips provide comfort, control, and added safety.
Qty:
Qty:
Qty:
Part #:505416
- Description
CHANNELLOCK® Straight Jaw Tongue & Groove Pliers are built to last with a PERMALOCK® fastener to eliminate nut and bolt failure, patented reinforcing edge to minimize stress breakage and laser-hardened teeth to provide a better, longer lasting grip. CHANNELLOCK® Straight Jaw Tongue & Groove Pliers are made in USA and forged from high carbon U.S. steel that is specially coated for ultimate rust prevention.
The ORIGINAL STRAIGHT JAW Tongue & Groove Pliers provide a strong, versatile grip for use in both directions
RELIABLE PERMALOCK® fastener eliminates nut and bolt failure with increased joint strength
STRONG 90-degree, laser-hardened teeth for superior grip and longevity
FORGED high carbon U.S. steel for maximum strength and durability is specially coated for ultimate rust prevention.
UNDERCUT tongue & groove won&rsquot slip
CHANNELLOCK BLUE® grips for comfort
100% MADE IN USA
Qty:
Part #:505946
- Old Lang 65-(75) Snap Ring Plier:
Qty:
Qty:
Part #:800583
- Lineman's Pliers, New England Nose, 7-Inch
&bull Streamlined design with sure-gripping, cross-hatched knurled jaws&bull Induction hardened cutting knives for long life&bull Hot-riveted joint ensures smooth action and no handle wobble&bull Unique handle tempering helps absorb the ''snap'' when cutting wire&bull Precision-hardened plier head for on-the-job toughness&bull Plastic-dipped handles for comfort and ease of identification&bull ''Handform'' handles for full gripping and cutting power&bull Custom, US-made tool steel forged for durability
Qty:
Part #:504390
- Pliers, Needle Nose Side-Cutters, 6-Inch
&bull Induction hardened cutting knives for long life&bull Knurled jaws for sure wrapping and looping&bull Slim head design for working in confined areas&bull Hot-riveted joint ensures smooth action and no handle wobble&bull Curved handles provide greater tool control&bull Plastic-dipped handles for comfort and ease of identification&bull Custom, US-made tool steel
Qty:
Part #:812334
- Pliers, Standard Needle Nose Pliers, Spring-Loaded, 6-Inch
&bull Knurled jaws for sure wrapping and looping&bull Hot-riveted joint ensures smooth action and no handle wobble&bull Slim head design for working in confined areas&bull Spring-loaded action for self-opening&bull Curved handles provide greater tool control&bull Plastic-dipped handles for comfort and ease of identification&bull Custom, US-made tool steel
Qty:
Part #:800586
- Diagonal Cutting Pliers, Heavy-Duty, All-Purpose, 6-Inch
&bull Short jaws and beveled cutting edges permit close cutting of wire&bull Tapered nose for easy working in confined areas&bull Short jaws and beveled cutting edges permit close cutting of wire&bull Induction-hardened cutting knives for long life&bull Hot-riveted joint ensures smooth action and no handle wobble&bull Plastic-dipped handles for comfort and ease of identification&bull Custom, US-made tool steel
Qty:
Part #:811713
- 7" Needle Nose Pliers
Polished heads resist rust and corrosion, extending the tool life
Serrated jaws provide extra gripping power
The PL-114CS short nose model is supplied with a spring and is designed for close, fine electrical and mechanical work
The PL-116C long nose model provides excellent gripping ability for use in tight, narrow places
Qty:
Part #:800797
- 10" Bent Handle Industrial Shears
The Crescent Wiss® Bent Handle Industrial Shear has thick, heavy duty blades for cutting multiple layers or tough materials and is ideal for cutting upholstery, carpet, and drapery. The precision ground blades allow for sharper cutting edges and a longer blade life. The handle rings comfortably fit users' hands, and the SET-EASY® pivot adjustment easily and securely adjusts to fit your grip. The hot dropped-forged nickel-plated blades provide long-lasting durability.
Qty:
Qty:
Part #:810056
- WEP 15-150 Quick (600488420) Angle Grinder Cardboard box with quick-locking nut
Highest service life for extreme applications robust, powerful angle grinder with greatest power density in its class for quick work progress
Longer service life, more drive the Metabo LongLife Motor with patented dust guard, up to 20% more high overload capacity and 50% more torque
Tacho-Constamatic (TC)-Full Wave Electronics fast work progress by means of constant speed under load
Quick disc change at the push of a button without tools, with the Metabo M-Quick System
Tool-free adjustable guard twist-proof
Low vibration side handleMetabo VibraTech (MVT)
Paddle switch with dead-man function safe to operate due to an ergonomically integrated switch
Metabo S-automatic Torque Limiting Clutch minimises kick-back to the lowest level when the disc jams unexpectedly - for maximum user protection and swift progress
Electronic overload protection, soft start and restart protection
Gear housing can be mounted turned in 90° steps for left-handed operation or cutting
Auto-stop carbon brushes to protect the motor
$
367.77
Qty:
Part #:507433
- ALUMINUM STRAIGHT PIPE WRENCHES&bull RIDGID® Aluminum Pipe Wrenches provide professional strength inlightweight aluminum. The Aluminum Straight Pipe Wrench offersthe same durability and ease-of-use found in all RIDGID heavy-dutywrenches.
1-1/2" Pipe Capacity
Qty:
Qty:
Part #:511840
- 1/8" Wire Rope Clip, Electro-Galvanized
If Used on Coated Cable, Remove the Coating From the Assembly Area
Follow Assembly Instructions
Qty:
Qty:
Part #:504830
- Hex End L-Wrenches - ProGuard&trade Finish
Chamfered tool tips eliminate burrs and help tools seat in screw head
Sharp corners transfer more torque to the screw and reduce stripping
Precision machined for ease of use and superior fit
Qty:
Part #:803887
- Description
CHANNELLOCK® Combination Long Nose Pliers offer a sleek, lightweight design and feature Xtreme Leverage Technology (XLT&trade). XLT&trade positions the rivet closer to the cutting edge so considerably less force is required to cut than other high leverage designs. State-of-the-art laser heat treating offers a strong and consistent pattern across the cutting edge, adding increased strength and longevity over traditional hardening practices. Crosshatch jaws provide maximum grip and durability, and an added pipe grip feature accommodates many shapes. A precision-machined knife-and-anvil style cutting system ensures perfect mating. CHANNELLOCK® Long Nose Pliers are made in USA and forged from high carbon U.S. steel that is specially coated for ultimate rust prevention.
COMBINATION Long Nose Pliers design is sleek, lightweight and includes an additional pipe grip feature
XTREME LEVERAGE TECHNOLOGY (XLT&trade) increases performance and reduces hand fatigue
LASER heat-treated cutting edges perform better and last longer
CROSSHATCH TEETH to provide maximum grip
PRECISION-machined knife and anvil style cutting edges ensure perfect mating for superior performance and longevity
FORGED high carbon U.S. steel for strength and durability is specially coated for ultimate rust prevention
CHANNELLOCK BLUE® grips for comfort
100% MADE IN USA
Qty:
Part #:509517
- Description
CHANNELLOCK® High Leverage Diagonal Cutting Pliers feature Xtreme Leverage Technology (XLT&trade) which makes cutting easier than ever. By positioning the rivet closer to the cutting edge, considerably less force is required to cut than other high leverage designs. State-of-the-art laser heat treating offers a strong and consistent pattern across the cutting edge for increased strength and longevity. These pliers also offer a slimmer, lighter, and better-balanced design for maximum performance and accessibility. CHANNELLOCK® Diagonal Cutting Pliers are made in USA and forged from high carbon U.S. steel that is specially coated for ultimate rust prevention.
XTREME LEVERAGE TECHNOLOGY (XLT&trade) increases performance and reduces hand fatigue
LASER heat-treated cutting edges perform better and last longer
PRECISION-machined knife and anvil style cutting edges ensure perfect mating for superior performance and longevity
FORGED high carbon U.S. steel for maximum strength and durability is specially coated for ultimate rust prevention
CHANNELLOCK BLUE® grips for comfort
100% MADE IN USA
Qty:
Part #:459-10907
- Bondhus® Balldriver® L-Wrench KeysProduct DetailsBall end inserts into a screw at a 25° angle and allows natural hand and wrist movementSaves time by quickly funneling tool into screwSuperior ball end strength and working angleWorks in hard-to-reach places.
Qty:
Part #:808145
- HEAVY-DUTY STRAIGHT PIPE WRENCHES&bull Straight Pipe Wrenches have a sturdy, ductile-iron housing andan I-beam handle with a full floating forged hook jaw, featuringself-cleaning threads with replaceable hook and heel jaws.&bull Heavy-duty pipe wrenches comply with federal specificationsGGG-W65IE, Type II, Class A.
6", 3/4" Pipe Capacity
Qty:
Displaying: 1 - 24 of 110 Matching Items