2/0
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Size: 2/0 15MM 20in Assorted
Part #:502824
-
2/0 Double Loop (Inco) Chain, Zinc Plated, 100' per Carton
Farm and Animal Chains, and Many General-Purpose Applications
Standard Material Low Carbon Steel
Standard Finish Zinc Plated, Galvanized
Design Factor 4 to 1
Packaged in Cartons, Order Unit is "Feet"
Made in the USA
Note Avoid Twisting in Suspension Applications
Campbell Recommends The Use of Proof Coil or Straight Link Coil Chain for Swing Set Applications
Do Not Use for Overhead Lifting
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:506987
- SHOCKWAVE&trade Impact Duty Drive and Fasten Set - 26PC
Milwaukee® SHOCKWAVE Impact Duty&trade Driver Bits, Nut Drivers, Sockets, and Socket Adapters are engineered for extreme durability and up to 10x life. Made from proprietary steel and heat treated to control hardness, the SHOCKWAVE Impact Duty&trade Driver Bits feature an innovatively designed geometric shock absorption zone to extend life. The forged tip allows for a secure grip and maximum contact eliminating stripping or slipping. . The SHOCKWAVE&trade 26PC Drive and Fasten Set provides a fastening solution for all standard hex sizes 1/4" to 9/16".
Qty:
Part #:516112
- SHOCKWAVE&trade 3PC Impact Insert Socket Adapter Set
Milwaukee® SHOCKWAVE Impact Duty&trade Insert Socket Adapters are engineered for extreme durability and up to 10x life. SHOCKWAVE Impact Duty&trade Insert Socket Adapters are made from proprietary steel and heat treated to control hardness.
Qty:
Qty:
Part #:507375
-
2/0 Passing Link Chain, Zinc Plated, 200' per Square Pail
Uses General Utility, Animal, and Farm and Ranch Applications
Standard Material Low Carbon Steel
Standard Finish Zinc Plated
Proof Tested
Design Factor 4 to 1
Packaged in Pails, Order Unit is "Each"
Made in the USA
Do Not Use for Overhead Lifting
DO NOT EXCEED THE WORKING LOAD LIMIT
Part #:509685
- SHOCKWAVE&trade 1-7/8" Magnetic Nut Driver Set (4PC)
The Milwaukee 4-piece 1-7/8 in. Magnetic Nut Driver Set offers durable, heat-treated steel bits in a versatile range of sizes. Chamfered edges allow fastening in tight spaces and color-coded banding makes identification easy. Includes 1 each 1/4 in. x 1-7/8 in., 5/16 in. x 1-7/8 in., 3/8 in. x 1-7/8 in. and 7/16 in. x 1-7/8 in. SHOCKWAVE magnetic nut drivers.
Qty:
Part #:500113
-
2/0 Lock Link Single Loop Chain, Wrapped, Zinc Plated, 100' per Carton
Ideal for Sprocket Wheel, Overhead Door Chains, General Utility Use
Standard Material Low Carbon Steel
Standard Finish Zinc Plated, Galvanized
Design Factor 4 to 1
Packaged in Cartons, Order Unit is "Feet"
Made in the USA
Do Not Use for Overhead Lifting
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Qty:
Part #:513134
- 15 mm 12-Point Metric SUPERCOMBO® Combination Wrench
&bull SUPERCOMBO® open end has specially designed grooves that direct wrench force away from fastener corners
&bull SUPERTORQUE® box opening design allows application of higher torque without rounding or deforming hex fastener points. No contact is made at the corners. Instead, wrenching forces are placed on the flat surfaces behind the points
&bull SUPERTORQUE® box opening design allows application of higher torque without rounding or deforming hex fastener points. No contact is made at the corners. Instead, wrenching forces are placed on the flat surfaces behind the points
&bull May be used on all common hex (6 point) fasteners with considerable advantage over conventional box end wrenches to increase both hand tool flexibility and economy
&bull May be used on all common hex (6 point) fasteners with considerable advantage over conventional box end wrenches to increase both hand tool flexibility and economy
Qty:
Part #:811614
- 1/2" Drive 20" Extension
&bull Chrome plating provides increased protection from rust and corrosion
&bull Ball and spring socket retention
&bull Spinner disk is ideal for fast turn down of fasteners
Qty:
Part #:228-480
- Description
CHANNELLOCK® 480 BIGAZZ® Straight Jaw Tongue & Groove Pliers didn't get their name by accident. With a 5-1/2 inch jaw capacity, these pliers are as big as the job at hand. Its 12 non-slip, undercut adjustment channels offer a versatile range of adjustments for virtually every field application. CHANNELLOCK® Straight Jaw Tongue & Groove Pliers are built to last with a PERMALOCK® fastener to eliminate nut and bolt failure, patented reinforcing edge to minimize stress breakage and laser-hardened teeth to provide a better, longer lasting grip. CHANNELLOCK® Straight Jaw Tongue & Groove Pliers are made in USA and forged from high carbon U.S. steel that is specially coated for ultimate rust prevention.
The ORIGINAL STRAIGHT JAW Tongue & Groove Pliers provide a strong, versatile grip for use in both directions
RELIABLE PERMALOCK® fastener eliminates nut and bolt failure with increased joint strength
STRONG 90-degree, laser-hardened teeth for superior grip and longevity
FORGED high carbon U.S. steel for maximum strength and durability is specially coated for ultimate rust prevention
UNDERCUT tongue and groove won&rsquot slip
CHANNELLOCK BLUE® grips for comfort
100% MADE IN USA
Qty:
Part #:729-48-20-7499
- SDS-PLUS 4CT MX4&trade 6 PC KIT
Our MX4&trade 4-Cutter SDS PLUS Rotary Hammer Drill Bits with solid head carbide deliver up to 5x longer life in concrete with rebar. Engineered with rebar guards to provide maximum durability in hard aggregate and rebar. We designed our MX4&trade 4-Cutter bits with sharp centering tips for exact spot drilling in concrete and metal decking. 4-cutter design prevents lock-up in rebar, reducing downtime. Variable flutes remove dust faster, reducing heat and delivering up to 20% more holes per battery charge. The wear mark indicator on each drill bit shows you when they no longer meet the ANSI requirement. These MILWAUKEE® MX4&trade 4-Cutter Drill Bits are ideal for concrete with rebar and masonry applications. Choose from single bits, bulk packs, or drill bit kits in a variety of sizes.
Qty:
Part #:506988
- SHOCKWAVE&trade Impact Security Insert Bit Set - 9PC
Our 9 Piece SHOCKWAVE&trade 1" Security Impact Bit Set is engineered to be the Most Durable, Best Fitting driver bits on the market. The Wear Guard Tip&trade delivers increased wear resistance which protects the fit over the life of the bit. The Shockzone&trade is optimized for for each tip type and length of driver bit to absorb peak torque and prevent breaking. The Custom Alloy76&trade has a customized steel and heat treatment per tip type to extend the life of the driver bits, providing up to 50X life vs. competitive impact driver bits. SHOCKWAVE&trade driver bits are built to deliver extreme durability for the most demanding applications.
Qty:
Displaying: 1 - 13 of 13 Matching Items