1-1/4in
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Size: 1-1/4in 2/0 5in 17MM
Part #:501574
- 4200 Pro Series 1 1/4" Stiff Putty Knife
The 4200 Professional Series of quality putty knives, wall scrapers, and taping knives. Black nylon solvent-resistant handle is designed for maximum safety and dependability. High-carbon, precision-ground steel blade is lacquered to prevent rust and extends through handle. The brass-plated, solid steel nail setting head can be used for setting drywall nails and other hammering jobs.
$
4.43
Qty:
Part #:288220
- M18 FUEL&trade 4-1/2" / 5" Braking Grinder (Tool Only)
The world's first cordless braking grinder stops accessories in under 2 seconds, delivers the power of a corded grinder, and has up to 10X longer tool life. The M18 FUEL&trade 4-1/2" / 5" Grinder supplies maximum sustained power to complete the toughest grinding, surface preparation and cutting applications. The POWERSTATE&trade Brushless Motor provides up to 10X longer motor life and lower cost of ownership. The M18&trade REDLITHIUM&trade XC5.0 Battery Pack delivers up to 4X more run time and 20% more power. The grinder features REDLINK PLUS&trade Intelligence, the most advanced system of cordless power tool electronics, for maximum performance. A Rapid Stop Brake feature stops accessories in under 2 seconds. The 18-volt lithium-ion grinder&rsquos thin body design gives it optimized balance to rest easily in your hands. Tool-free accessory changes using the FIXTEC nut and guard adjustments mean less downtime during work. The grinder is built with the same tool body, gearing system and anti-vibration side handle as Milwaukee&rsquos legendary high-performance corded grinders for maximum durability on the job. The kit includes 2 M18&trade REDLITHIUM&trade XC5.0 Extended Capacity Battery Packs, a multi-voltage charger and carrying case. Grinding wheel sold separately.
Qty:
Part #:502824
-
2/0 Double Loop (Inco) Chain, Zinc Plated, 100' per Carton
Farm and Animal Chains, and Many General-Purpose Applications
Standard Material Low Carbon Steel
Standard Finish Zinc Plated, Galvanized
Design Factor 4 to 1
Packaged in Cartons, Order Unit is "Feet"
Made in the USA
Note Avoid Twisting in Suspension Applications
Campbell Recommends The Use of Proof Coil or Straight Link Coil Chain for Swing Set Applications
Do Not Use for Overhead Lifting
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:729-2882-22
- M18 FUEL&trade 4-1/2" / 5" Braking Grinder w/ ONE-KEY&trade Paddle Switch, No Lock
Our M18 FUEL&trade 4-1/2" / 5" Braking Grinder with ONE-KEY&trade Paddle Switch, No Lock Kit is the next advancement in power and performance of cordless grinders while enhancing safety with its RAPIDSTOP&trade Brake. The M18 FUEL&trade 4-1/2" / 5" Braking Grinder with ONE-KEY&trade generates 11A corded power to complete the toughest grinding and cutting applications. The POWERSTATE&trade Brushless Motor delivers maximum sustained power and 8,500 RPM to remove material faster and increase productivity. REDLINK PLUS&trade Intelligence ensures unmatched levels of performance, protection, and compatibility. The RAPIDSTOP&trade Brake provides stop times under 2 seconds with an abrasive disc. Our M18 FUEL&trade 4-1/2" / 5" Braking Grinder with ONE-KEY&trade includes an electronic clutch for kickback protection, as well as overload protection to maximize motor life. Compatible with ONE-KEY&trade, this grinder wirelessly connects to a smartphone to track and manage the tool, providing you with visibility to where tools are across your network of jobs. The included M18&trade REDLITHIUM&trade HIGH OUTPUT&trade XC6.0 Batteries deliver 50% more power while running 50% cooler than the M18&trade REDLITHIUM&trade XC Batteries. Experience faster accessory changes, and less downtime with tool-free accessory and guard adjustments, while remaining fully compatible with the most common accessories in the market. The MILWAUKEE® M18 FUEL&trade 4-1/2" / 5" Braking Grinder with ONE-KEY&trade is the next level of jobsite productivity and enhanced safety in cordless grinders.
Qty:
Qty:
Part #:511751
- Replacement for Discontinued Stanley 1-1/4in Satin Finish Standard Combination Wrench 86-846
Qty:
Qty:
Part #:503695
- 1-1/4" Shank Diameter Eyebolts Plain Pattern
Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
Each lot is tested and inspected to insure conformance to specifications
Available with UNC Class 2A thread only
Plain pattern eyebolts must never be used to lift an angular load
Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
Qty:
Part #:511227
- Country of Origin US:
Qty:
Part #:811830
- 1/2" Drive Impact 5" Extension
&bull Specially heat treated for impact use to provide long life, safety, and durability
&bull Spring plunger provides secure socket retention for safety and convenience
&bull Suitable for use with pneumatic and electric impact wrenches
Qty:
Part #:134-J5440H
-
Proto® 6 Point Sockets are ideal for use on stubborn or damaged fasteners, and also on fasteners made from soft materials.
The TorquePlus&trade design is a high performance drive configuration which allows for quick and easy socket engagement to the fastener flats, not the corners.
The TorquePlus&trade configuration employs a radius-corner design, shifting contact area and stress away from the fastener corners and distributing contact stresses over a large area of the socket, minimizing slippage.
The TorquePlus&trade internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fasteners.
Qty:
Part #:503805
- 1/2" Drive 6-Point SAE 1-1/4" Shallow Socket
SUPERTORQUE lobular openings for greater turning power without deforming the fastener
Designed for maximum engagement on 6 point fasteners
Qty:
Part #:507857
- 3/4" Drive SAE 1-1/4" Impact Shallow Socket
SUPERTORQUE lobular openings for greater turning power without deforming the fastener
Designed for maximum engagement on 6 point fasteners
Suitable for use with pneumatic and electric impact wrenches
Specially heat treated for impact use to provide long life, safety, and durability
Qty:
Part #:507375
-
2/0 Passing Link Chain, Zinc Plated, 200' per Square Pail
Uses General Utility, Animal, and Farm and Ranch Applications
Standard Material Low Carbon Steel
Standard Finish Zinc Plated
Proof Tested
Design Factor 4 to 1
Packaged in Pails, Order Unit is "Each"
Made in the USA
Do Not Use for Overhead Lifting
DO NOT EXCEED THE WORKING LOAD LIMIT
Part #:511903
-
1-1/4" Anchor Shackle, Screw Pin, Forged Carbon Steel, Painted Blue
Shackle Bodies Are Drop-Forged Carbon Steel
Self Colored (Painted Blue)
C-419-S Shackles Meet the Design Requirements of Federal Specification RR-C-271, Type IVA, Grade A, Class 2
Working Load Limit, Size, Manufacture Name, Date Code and USA Permanently Marked on Each Shackle
Statistically Tested for Impact Resistance, Tensile Strength, Hardness, Ductility and Fatigue
419 Series Shackles Meet or Exceed All Manufacturing Requirements of the ASME B30.26 &rdquoRigging Hardware&rdquo. These Include the Material Ductility Requirement (Section 26-1.1.2), the Design Factor Requirement (Section 26.1.2), the Identification Requirement (Section 26-1.5.1), and the Effective Temperature Range (Section 26-1.6.1). the Shackles Can Be Proof Tested in Accordance with Section 26-1.4
Certification Available Upon Request
6 to 1 Design Factor
Pins and Bolts Are Heat-Treated and Made of Alloy Steel
Qty:
Part #:506141
- Fits K1500,K1500SP, K1500G, K5208
1 1/4" (32 mm) x 15' (4,6 m) Extra Heavy Duty Wind
15' (4,6 m) Extra-Heavy- Duty Wind.3/8" (10 mm) Pitch. Recommended For4" (110 mm) - 10" (250 mm) LongRuns, No 4" (110 mm) Traps
Qty:
Qty:
Qty:
Qty:
Part #:1184-JHWS-205P
- 1/2" Drive 5" Wobble Extension
Qty:
Part #:500385
- 1-1/4" 12-Point SAE SUPERCOMBO® Combination Wrench
&bull SUPERCOMBO® open end has specially designed grooves that direct wrench force away from fastener corners
&bull SUPERTORQUE® box opening design allows application of higher torque without rounding or deforming hex fastener points. No contact is made at the corners. Instead, wrenching forces are placed on the flat surfaces behind the points
&bull Meets or exceeds AErospace specification AS 954 for 12 point fasteners (as defined by AS 870) to provide accurate torque/tension relationship for precision application
&bull May be used on all common hex (6 point) fasteners with considerable advantage over conventional box end wrenches to increase both hand tool flexibility and economy
&bull Box and open end openings are identical
Qty:
Qty:
Qty:
Qty:
Displaying: 1 - 24 of 69 Matching Items