2-1/16"
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Alt. Length: 2-1/16" 9-1/2" 12"
Part #:511296
-
HIT-Z Anchor rod Anchor rod HIT-Z 5/8" x 9-1/2" #2018448Material, corrosionCarbon steel, zinc-platedWrench/nut size15/16 inDrill bit diameter3/4 inBase materialsConcrete (cracked), Concrete (uncracked)PROFIS SoftwareYesApprovals / Test reportsICC-ES report (concrete)Cleaning proceduresNon CleaningType of fixingPre-fastening, Through-fasteningProduct ClassUltimate
Qty:
Qty:
Part #:812981
- 12" Extra-Long Cold Chisels
Designed for cutting, shaping and removing metal softer than the cutting edge of the chisel
Qty:
Part #:810311
- 12" Long Taper Punches
Designed for aligning the holes in metal pieces through which rivets, bolts, or screws will be inserted
Not intended for driving pins as punch may become stuck in work
Also called line-up aligning or drift punches
Qty:
Part #:521078
- Bit Extension 12"
Extend your reach when drilling with Milwaukee Selfeed Bits, Auger Bits and Hole Saws. Accepts all 7/16 inch hex, secures with a hex key included. The 7/16 inch hex fits both 3 jawed chucks, 1/2 inch drill capacity and larger, as well as 7/16 inch Quick Change chucks.
Qty:
Part #:521077
- 12" x 1/4" Universal QUIK-LOK&trade Extension
The 1/4" Universal QUIK-LOK&trade Extension has an innovative design that fits all 1/4" shanks - with or without a power-groove. The unique design requires no tools to change out bits, making it fast and efficient.
Qty:
Qty:
Part #:501132
- 5/8" 12-Point SAE SUPERCOMBO® Black Industrial Finish Combination Wrench
&bull SUPERCOMBO® open end has specially designed grooves that direct wrench force away from fastener corners
&bull SUPERTORQUE® box opening design allows application of higher torque without rounding or deforming hex fastener points. No contact is made at the corners. Instead, wrenching forces are placed on the flat surfaces behind the points
&bull Meets or exceeds AErospace specification AS 954 for 12 point fasteners (as defined by AS 870) to provide accurate torque/tension relationship for precision application
&bull May be used on all common hex (6 point) fasteners with considerable advantage over conventional box end wrenches to increase both hand tool flexibility and economy
&bull Box and open end openings are identical
Qty:
Part #:501960
- 12" Extra-Long Cold Chisels
Designed for cutting, shaping and removing metal softer than the cutting edge of the chisel
Qty:
Part #:810263
- 12" Extra-Long Cold Chisels
Designed for cutting, shaping and removing metal softer than the cutting edge of the chisel
Qty:
Part #:500487
- 3/4" Drive Shallow Sockets, 12-Point, SAE, High Polished Chrome Finish
&bull SUPERTORQUE® lobular openings for greater turning power without deforming the fastener
&bull Designed for quick engagement on both 6 and 12 point fasteners
Qty:
Part #:513135
- 16 mm 12-Point Metric SUPERCOMBO® Combination Wrench
&bull SUPERCOMBO® open end has specially designed grooves that direct wrench force away from fastener corners
&bull SUPERTORQUE® box opening design allows application of higher torque without rounding or deforming hex fastener points. No contact is made at the corners. Instead, wrenching forces are placed on the flat surfaces behind the points
&bull SUPERTORQUE® box opening design allows application of higher torque without rounding or deforming hex fastener points. No contact is made at the corners. Instead, wrenching forces are placed on the flat surfaces behind the points
&bull May be used on all common hex (6 point) fasteners with considerable advantage over conventional box end wrenches to increase both hand tool flexibility and economy
&bull May be used on all common hex (6 point) fasteners with considerable advantage over conventional box end wrenches to increase both hand tool flexibility and economy
Qty:
Part #:810413
- 5/8" 12-Point SAE SUPERCOMBO® Combination Wrench
&bull SUPERCOMBO® open end has specially designed grooves that direct wrench force away from fastener corners
&bull SUPERTORQUE® box opening design allows application of higher torque without rounding or deforming hex fastener points. No contact is made at the corners. Instead, wrenching forces are placed on the flat surfaces behind the points
&bull Meets or exceeds AErospace specification AS 954 for 12 point fasteners (as defined by AS 870) to provide accurate torque/tension relationship for precision application
&bull May be used on all common hex (6 point) fasteners with considerable advantage over conventional box end wrenches to increase both hand tool flexibility and economy
&bull Box and open end openings are identical
Qty:
Part #:502076
- 1/2" Drive 12-Point SAE 1-3/8" Shallow Socket
&bull SUPERTORQUE® lobular openings for greater turning power without deforming the fastener
&bull Designed for quick engagement on both 6 and 12 point fasteners
Qty:
Part #:729-48-62-2050
- 2" Scaling Chisel
Milwaukee® Spline or Round/Hex Standard Chisels are made of drop forged high grade steel. These chisels are specifically designed for spline rotary hammers and should be used in hammer only mode.
Qty:
Part #:729-48-32-4512
- SHOCKWAVE&trade Impact Magnetic Bit Holder
Our SHOCKWAVE&trade Impact Duty&trade Magnetic Bit Holders are engineered for extreme durability and up to 30x life. The MILWAUKEE magnetic bit holders are made from proprietary steel, heat treated to control hardness. The SHOCKWAVE&trade magnetic bit holders feature a powerful magnet, providing you with a secure grip and unyielding bit engagement. Each bit holder has a 2-piece construction for optimal assembly in abusive applications. Our SHOCKWAVE&trade Impact Duty&trade Magnetic Bit Holders can now be used with with Milwaukee SHOCKWAVE&trade Impact Duty Insert Magnetic Nut Drivers (¼&rdquo, 5/16&rdquo, &rdquo, 7/16&rdquo, ½&rdquo).
Qty:
Part #:729-E250IM
- Business Unit Hand Tools, Storage, PPE. Product Level 1 HT|S|PPE-Layout. Product Level 2 HT|S|PPE-Squares. Product Level 3 HT Combo Squares. Product Level 4 HT IM Squares. Product Level 5 HT Empire. AX Item Number E250IM. Country of Origin USA. Harmonized Tariff 9017208080.:
Qty:
Part #:729-E250
- 12" Professional Combination Square
BLADE-LOCK&trade for fast adjustment and secure hold
DUAL-PITCH&trade vial for checking 1 and 2 degree slope
Rational Head Dimensions
Heavy duty machined head for guaranteed accuracy
Scriber pin stored on board for convenient marking of materials
High visibility chemical etched stainless steel blade
Made in the USA with global materials
Limited lifetime warranty
Qty:
Part #:729-48-20-7203
- Country of Origin DEU:
Qty:
Part #:729-48-20-7434
- Country of Origin DEU:
Qty:
Part #:729-48-20-7335
- Country of Origin DEU:
Qty:
Part #:729-48-03-3540
- Spline Thin Wall Core Bit 12" Adapter Shank
Qty:
Part #:729-48-03-3564
- Spline Thick Wall Core Bit 12" Adapter Shank
Qty:
Displaying: 1 - 24 of 26 Matching Items