3/8in
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Size: 3/8in 9/16in 10in 22MM
Part #:502810
-
3/8" Grade 30 Proof Coil Chain, Zinc Plated, 63' per Round Pail
Excellent Low Carbon Steel Chain for General Purpose Applications
Frequently Used for Fabricating Tow Chains, Binding and Logging Chains, Marine and Other General Applications
Standard Finish Zinc Plated or Galvanized
Hallmarking "C3" and "USA" on 5/16" and Larger
Proof Tested
Design Factor 4 to 1
Packaged in Pails, Order Unit is "Each"
Made in the USA
Do Not Use for Overhead Lifting
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:729-2407-22
- M12&trade 3/8&rdquo Drill/Driver Kit
Our M12&trade 3/8&rdquo Drill/Driver Kit drills and fastens up to 35% faster than its competitors and is the only tool in its class that has an all-metal locking chuck. The powerful compact cordless drill driver delivers 275 in-lbs of torque &ndash up to 25% more torque than the competition &ndash and 0-400/0-1,500 RPM. Its compact, lightweight and durable design offers you greater comfort and efficiency on the job site. The all-metal single-sleeve ratcheting chuck gives you superior bit grip so you won't have to stop for bit retightening or risk losing bits. The drill driver features an onboard LED light and fuel gauge helping you increase productivity and avoid interruptions. The REDLITHIUM&trade Battery Pack gives you more work per charge and more work over pack life than the competitors. In addition to the compact drill driver, the kit includes two M12&trade REDLITHIUM&trade batteries, a 30-minute charger and carrying case.
Qty:
Part #:808147
- HEAVY-DUTY STRAIGHT PIPE WRENCHES&bull Straight Pipe Wrenches have a sturdy, ductile-iron housing andan I-beam handle with a full floating forged hook jaw, featuringself-cleaning threads with replaceable hook and heel jaws.&bull Heavy-duty pipe wrenches comply with federal specificationsGGG-W65IE, Type II, Class A.
10", 1-1/2" Pipe Capacity
Qty:
closeout
$11.73 MSRP
$
10.35
Part #:511844
- CLOSEOUTS Only 35 Left!
-
3/8" Wire Rope Clip, Forged Carbon Steel, Galvanized (Discontinued being replaced by 490-M248-2)
Base is Drop-Forged Carbon Steel
Hot Galvanized to ASTM A-153 to Resist Rust and Corrosion
U-Bolts Are colored Blue for Identification Purposes and Use Heavy Duty Hex Nuts (UNC-2A)
Designed to Meet Federal Specifications, FF-C-450, Type 1, Class 1
Designed to Meet or Exceed All Requirements of ASME B30.26 Including Identification, Ductility, Design Factor and Temperature
Permanently Marked with Size and Manufacturer
Sizes 1/4" and Above Marked with USA and Date Code
Sizes 1/8" Through 1-1/4" Are Supplied Bagged and Unassembled
Note See Application and Warning Information
Qty:
Qty:
Qty:
Qty:
Part #:812950
- 10" SAE Adjustable Chrome Finish Wrench
&bull Slim head with tapered jaws combine easy accessibility with extra turning strength
&bull Measurement scale on head conveniently shows fastener size (except for 24" and 30" wrenches)
&bull Precision hardened and anti-corrosion treated
Qty:
Part #:501142
- 10" Adjustable Wrench - Boxed
Since the introduction of the original Crescent wrench in the early 1900s, the Crescent brand has become synonymous with adjustable wrenches. Crescent Adjustable Wrenches feature a large knurl for easy adjustment and a tight jaw fit. Its hex jaw design helps reduce slippage and tightly grips the fastener for solid, secure operation, while the corrosion-resistant chrome finish helps prevent rusting. A wide handle design provides comfort and reduces fatigue during extended use. The Crescent adjustable wrenches are ideal for both pros and do-it-yourself enthusiasts.
Qty:
Part #:500375
- 9/16" 12-Point SAE SUPERCOMBO® Combination Wrench
&bull SUPERCOMBO® open end has specially designed grooves that direct wrench force away from fastener corners
&bull SUPERTORQUE® box opening design allows application of higher torque without rounding or deforming hex fastener points. No contact is made at the corners. Instead, wrenching forces are placed on the flat surfaces behind the points
&bull Meets or exceeds AErospace specification AS 954 for 12 point fasteners (as defined by AS 870) to provide accurate torque/tension relationship for precision application
&bull May be used on all common hex (6 point) fasteners with considerable advantage over conventional box end wrenches to increase both hand tool flexibility and economy
&bull Box and open end openings are identical
Qty:
Qty:
Qty:
Qty:
Part #:503456
- 9/16" Shank Diameter Eyebolts Shoulder Pattern
Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
Each lot is tested and inspected to insure conformance to specifications
Available with UNC Class 2A thread only
Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially. A steel washer or spacer may be required for proper seating
To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
Qty:
Part #:503686
- 3/8" Shank Diameter Eyebolts Plain Pattern
Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
Each lot is tested and inspected to insure conformance to specifications
Available with UNC Class 2A thread only
Plain pattern eyebolts must never be used to lift an angular load
Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
Qty:
Qty:
Part #:811597
- 3/8" Drive 6-Point SAE 9/16" Deep Socket
SUPERTORQUE lobular openings for greater turning power without deforming the fastener
Designed for maximum engagement on 6-point fasteners
Qty:
Qty:
Qty:
Qty:
Part #:810243
- 5 1/2" Cold Chisels
The most commonly used chisels in the chisel line
For cutting, shaping and removing metal softer than the cutting edge of the chisel
Qty:
Part #:501195
- Plain Bearing Design, wide applications- Drill press, wood lathes, portable drills. 1/2in (13mm) Capacity, JACOBS K32 Key.
Qty:
Part #:507004
-
3/8" Clevis Slip Hook, Grade 43, Zinc Plated
Forged Steel
Grade 43
UPC Tagged
Slip Hooks Are Designed to Allow Chain to Slip Through the Hook
Hooks are Sized by the Material Diameter of the Chain That They Engage. Make Sure the Hook Size and Chain Diameter are Compatible Before Attaching to Load
Qty:
Part #:510954
-
Setting tool HVU HIS Setting tool Mechanical setting tool HVU HIS 3/8" #45969
$
94.05
Qty:
Displaying: 25 - 48 of 188 Matching Items