5/16in
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Size: 5/16in
Part #:507505
-
5/16" Alloy Clevis Slip Hook, Forged Alloy, Painted Orange
Material is Heat-Treated Alloy Steel
Alloy Hooks Are Painted Orange and Stamped "AH"
1/4" to 3/8" Hooks Have Drilled Hole for Latch Kit
Design Factor 3.5 to 1
Slip Hooks Are Designed to Allow Chain to Slip Through the Hook
Hooks are Sized by the Material Diameter of the Chain That They Engage. Make Sure the Hook Size and Chain Diameter are Compatible Before Attaching to Load
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:511892
-
5/16" Anchor Shackle, Screw Pin, Forged Carbon Steel, Painted Blue
Shackle Bodies Are Drop-Forged Carbon Steel
Self Colored (Painted Blue)
C-419-S Shackles Meet the Design Requirements of Federal Specification RR-C-271, Type IVA, Grade A, Class 2
Working Load Limit, Size, Manufacture Name, Date Code and USA Permanently Marked on Each Shackle
Statistically Tested for Impact Resistance, Tensile Strength, Hardness, Ductility and Fatigue
419 Series Shackles Meet or Exceed All Manufacturing Requirements of the ASME B30.26 &rdquoRigging Hardware&rdquo. These Include the Material Ductility Requirement (Section 26-1.1.2), the Design Factor Requirement (Section 26.1.2), the Identification Requirement (Section 26-1.5.1), and the Effective Temperature Range (Section 26-1.6.1). the Shackles Can Be Proof Tested in Accordance with Section 26-1.4
Certification Available Upon Request
6 to 1 Design Factor
Pins and Bolts Are Heat-Treated and Made of Alloy Steel
Qty:
Part #:806807
-
5/16" Quick Link, Steel, Zinc Plated, #7350
For Fast and Easy Connections Between Two Lengths of Chain
DO NOT EXCEED THE WORKING LOAD LIMIT
Do Not Use for Overhead Lifting or Hoisting
Do Not Use to Support Human Weight, for Playground or Athletic Equipment, or as a Safety Device
Qty:
Part #:502807
-
5/16" Grade 30 Proof Coil Chain, Zinc Plated, 92' per Round Pail
Excellent Low Carbon Steel Chain for General Purpose Applications
Frequently Used for Fabricating Tow Chains, Binding and Logging Chains, Marine and Other General Applications
Standard Finish Zinc Plated or Galvanized
Hallmarking "C3" and "USA" on 5/16" and Larger
Proof Tested
Design Factor 4 to 1
Packaged in Pails, Order Unit is "Each"
Made in the USA
Do Not Use for Overhead Lifting
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:504835
- Hex End L-Wrenches - ProGuard&trade Finish
Chamfered tool tips eliminate burrs and help tools seat in screw head
Sharp corners transfer more torque to the screw and reduce stripping
Precision machined for ease of use and superior fit
Qty:
Part #:511843
-
5/16" Wire Rope Clip, Forged Carbon Steel, Galvanized
Base is Drop-Forged Carbon Steel
Hot Galvanized to ASTM A-153 to Resist Rust and Corrosion
U-Bolts Are colored Blue for Identification Purposes and Use Heavy Duty Hex Nuts (UNC-2A)
Designed to Meet Federal Specifications, FF-C-450, Type 1, Class 1
Designed to Meet or Exceed All Requirements of ASME B30.26 Including Identification, Ductility, Design Factor and Temperature
Permanently Marked with Size and Manufacturer
Sizes 1/4" and Above Marked with USA and Date Code
Sizes 1/8" Through 1-1/4" Are Supplied Bagged and Unassembled
Note See Application and Warning Information
Qty:
Part #:511941
-
5/16" Heavy Wire Rope Thimble, Galvanized
Standard Material Hot Rolled, Mild Steel
Galvanized
Imported
A Thimble is a Wear Pad That Protects the Rope From Cuts, Kinking and Abrasions. Always Use An Appropriate Thimble When Making An Eye in a Rope.
When it is Necessary to Open a Thimble to Insert a Fitting, Make Sure the Points are Properly Aligned When the Thimble is Closed. Inspect Carefully for Cracks.
Thimbles ARE NOT Designed for Load Carrying Purposes Therefore Working Load Limits Have Not Been Established.
Qty:
Part #:729-48-22-2822
- 5/16" Slotted - 6" Cushion Grip Screwdriver (Discontinued, Replaced by MT207)
Featuring an anti-peel handle design, hardened tips & forged shanks the Milwaukee® Cushion Grip Screwdrivers provide professional grade solutions and durability to the user. The tactile identification, a new-to-world innovation allows users to accurately select the correct driver without looking. The wrench-ready bolster and precision knurling offers users the features needed to increase effeciency and effectiveness.
Qty:
Part #:802776
- 5/16-Inch Cabinet Tip Screwdriver 1-1/2-Inch
&bull Stubby size allows for precision in tight spaces&bull Tip-Ident® quickly identifies the screwdriver type and tip orientation&bull Precision-machined tip for exact fit&bull Cushion-Grip handle for greater torque and comfort&bull Premium chrome-plated for smooth feel and corrosion resistance&bull Internal flanges inside handle provide solid, twist-resistant blade anchor&bull Special heat-treated shafts for added durability&bull Meets or exceeds applicable ASME / ANSI specifications
Qty:
Part #:508145
- 5/16-Inch Keystone Screwdriver, 6-Inch Square Shank
&bull Heavy-duty square shank for wrench-assisted turning&bull Bolster reinforces shank for hard use&bull Designed for the most demanding uses&bull Cushion-Grip handle for greater torque and comfort&bull Premium chrome-plated for smooth feel and corrosion resistance&bull Internal flanges inside handle provide solid, twist-resistant blade anchor&bull Special heat-treated shafts&bull Precision-machined tip for exact fit&bull Meets or exceeds applicable ASME / ANSI specifications&bull Tip-Ident® quickly identifies the screwdriver type and tip orientation
Qty:
Part #:503697
- 5/16" Shank Diameter Eyebolts Shoulder Pattern
Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
Each lot is tested and inspected to insure conformance to specifications
Available with UNC Class 2A thread only
Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially. A steel washer or spacer may be required for proper seating
To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
Qty:
Qty:
Qty:
Qty:
Part #:810216
- 1/2" Drive SAE 5/16" Standard Length Hex Bit Socket
&bull High-polished chrome finish socket cleans easily
&bull Two piece design allows bits to be replaced easily
Qty:
Part #:508016
-
5/16" Grade 30 Proof Coil Chain, Zinc Plated, 92' per Round Pail
Excellent Low Carbon Steel Chain for General Purpose Applications
Frequently Used for Fabricating Tow Chains, Binding and Logging Chains, Marine and Other General Applications
Standard Finish Zinc Plated or Galvanized
Hallmarking "C3" and "USA" on 5/16" and Larger
Proof Tested
Design Factor 4 to 1
Packaged in Pails, Order Unit is "Each"
Made in the USA
Do Not Use for Overhead Lifting
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:506984
- SHOCKWAVE&trade 2-9/16" MAG NUTDRIVER 5/16"
Milwaukee® SHOCKWAVE Impact Duty&trade Magnetic Nut Drivers are engineered for extreme durability and up to 10x life. Made from proprietary steel and heat treated to control hardness, the SHOCKWAVE Impact Duty&trade Magnetic Nut Drivers feature a powerful magnet allowing for a secure grip and unyielding bit engagement. The bits feature color-coded rings for quick and easy size identification and a chamfered edge to allow for fastening in tight spaces. Broadly targeting cordless users, the SHOCKWAVE Impact Duty&trade accessory line is not only ideal for heavy duty impact applications, but delivers a full system solution for all the user's drilling and fastening needs.
Qty:
Part #:812781
- 5" Cold Chisels
The most commonly used chisels in the chisel line
For cutting, shaping and removing metal softer than the cutting edge of the chisel
Qty:
Part #:509593
- 1/4" Drive 6-Point SAE 5/16" Shallow Socket
&bull SUPERTORQUE® lobular openings for greater turning power without deforming the fastener
&bull Designed for maximum engagement on 6 point fasteners
Qty:
Part #:507504
-
5/16" Alloy Clevis Grab Hook, Forged Alloy, Painted Orange
Material is Drop-Forged Carbon Steel (Grade 30 & 43) or Heat-Treated Alloy Steel
Grade 30 & 43 Hooks Available Self-Colored or Zinc-Plated
Alloy Hooks Are Painted Orange and Stamped &rdquoAlloy&rdquo 3.5 to 1 Design Factor
Alloy Hook Sizes 1/4" to 3/8" are Supplied Individually Bagged and Unassembled
Self-Colored Finish Hooks Are Bulk Packed, Zinc Plated Hooks Are Packed 10 Per Box
Grab Hooks Are Designed to Grab a Chain Link and Hold it in Place
Hooks are Sized by the Material Diameter of the Chain That They Engage. Make Sure the Hook Size and Chain Diameter are Compatible Before Attaching to Load
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
closeout
$14.93 MSRP
$
10.00
Part #:511863
- CLOSEOUTS Only 10 Left!
-
5/16" Clevis Grab Hook, Forged Steel, Self Colored
Material is Drop-Forged Carbon Steel (Grade 30 & 43) or Heat-Treated Alloy Steel
Grade 30 & 43 Hooks Available Self-Colored or Zinc-Plated
Alloy Hooks Are Painted Orange and Stamped &rdquoAlloy&rdquo 3.5 to 1 Design Factor
Alloy Hook Sizes 1/4" to 3/8" are Supplied Individually Bagged and Unassembled
Self-Colored Finish Hooks Are Bulk Packed, Zinc Plated Hooks Are Packed 10 Per Box
Grab Hooks Are Designed to Grab a Chain Link and Hold it in Place
Hooks are Sized by the Material Diameter of the Chain That They Engage. Make Sure the Hook Size and Chain Diameter are Compatible Before Attaching to Load
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:806777
- Coated Screwdriver, 5/16-Inch Cabinet Tip, 6-Inch
&bull Plastic coated for circuit protection only. NOT INSULATED&bull Special plastic coating resists cutting, cracking, and chipping&bull Thin coating permits use in confined areas&bull Cushion-Grip handle for greater torque and comfort&bull Premium chrome-plated for smooth feel and corrosion resistance&bull Internal flanges inside handle provide solid, twist-resistant blade anchor&bull Special heat-treated shafts&bull Precision-machined tip for exact fit&bull Meets or exceeds applicable ASME / ANSI specifications&bull Tip-Ident® quickly identifies the screwdriver type and tip orientation
Qty:
Qty:
Qty:
Displaying: 1 - 24 of 53 Matching Items