5-3/8in
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Length: 5-3/8in 5-9/16in 25ft 141 ft
Part #:508013
-
1/4" Grade 30 Proof Coil Chain, Zinc Plated, 141' per Round Pail
Excellent Low Carbon Steel Chain for General Purpose Applications
Frequently Used for Fabricating Tow Chains, Binding and Logging Chains, Marine and Other General Applications
Standard Finish Zinc Plated or Galvanized
Hallmarking "C3" and "USA" on 5/16" and Larger
Proof Tested
Design Factor 4 to 1
Packaged in Pails, Order Unit is "Each"
Made in the USA
Do Not Use for Overhead Lifting
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Qty:
Part #:729-48-22-0325
- 25ft Compact Wide Blade Magnetic Tape Measure
Our Compact Wide Blade Tape Measures have up to 15' of reach allowing you to quickly take measurements. The tape is wear and impact-resistant with nylon blade protection and an additional anti-tear coating on the first 6&rdquo of the blade, reducing tape tear. Built to withstand the jobsite, the compact measuring tapes are constructed with a 5-point reinforced frame for impact resistance.
Qty:
Part #:510610
- 1" x 25" P1000 Series Yellow Clad A5 Blade Power Return Tape Measure
Crescent Lufkin® built its reputation on durability and these new tapes are no exception. The P1000 Series cases are made of tough ABS plastic, modified for increased strength and impact resistance. Every blade is protected with a clear-coat that exceeds ASTM standards for abrasion and corrosion resistance.
Qty:
Qty:
closeout
$28.99 MSRP
$
26.06
Part #:500221
- CLOSEOUTS Only 21 Left!
- Crescent Lufkin 25 ft. Tape Measures, 1" Blade (Discontinued being replaced by PHV1425N)
Qty:
Part #:500315
- 3/4 to 2" SAE Adjustable Hook Spanner Wrench
&bull Ideal for adjusting collars, lock nut rings, and bearings
&bull Specifically engineered to hold up under the most rigorous industrial use
Qty:
Qty:
Qty:
Qty:
Part #:503693
- 7/8" Shank Diameter Eyebolts Plain Pattern
Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
Each lot is tested and inspected to insure conformance to specifications
Available with UNC Class 2A thread only
Plain pattern eyebolts must never be used to lift an angular load
Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
Qty:
Part #:729-48-22-0225M
- Country of Origin VNM:
Qty:
Part #:502626
- Country of Origin TW:
Qty:
Displaying: 1 - 13 of 13 Matching Items