5/32in
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Size: 5/32in 7/8in 9in 5.0mm
closeout
$17.12 MSRP
$
9.77
Part #:511946
- CLOSEOUTS Only 10 Left!
-
7/8" Heavy Wire Rope Thimble, Galvanized
Standard Material Hot Rolled, Mild Steel
Galvanized
Imported
A Thimble is a Wear Pad That Protects the Rope From Cuts, Kinking and Abrasions. Always Use An Appropriate Thimble When Making An Eye in a Rope.
When it is Necessary to Open a Thimble to Insert a Fitting, Make Sure the Points are Properly Aligned When the Thimble is Closed. Inspect Carefully for Cracks.
Thimbles ARE NOT Designed for Load Carrying Purposes Therefore Working Load Limits Have Not Been Established.
Qty:
Qty:
Part #:507877
- Lineman's Square Nose Pliers, 9-Inch
&bull High-leverage design. Rivet is closer to the cutting edge for 46-percent greater cutting and gripping power than other plier designs&bull Hot-riveted joint ensures smooth action and no handle wobble&bull Induction hardened cutting knives for long life&bull Streamlined design with sure-gripping, cross-hatched knurled jaws&bull Unique handle tempering helps absorb the ''snap'' when cutting wire&bull Precision-hardened plier head for on-the-job toughness&bull Plastic-dipped handles for comfort and ease of identification&bull ''Handform'' handles for full gripping and cutting power&bull Custom, US-made tool steel
Qty:
Part #:806750
- High-Leverage Side-Cutters
&bull High-leverage design. Rivet is closer to the cutting edge for 46-percent greater cutting and gripping power than other plier designs&bull High-leverage design. Rivet is closer to the cutting edge for 46-percent greater cutting and gripping power than other plier designs&bull Induction hardened cutting knives for long life&bull Streamlined design with sure-gripping, cross-hatched knurled jaws&bull Unique handle tempering helps absorb the ''snap'' when cutting wire&bull Precision-hardened plier head for on-the-job toughness&bull ''Handform'' handles for full gripping and cutting power&bull Custom, US-made tool steel
Qty:
Part #:501614
- Heavy Duty Lineman's Pliers, 9-Inch
&bull High-leverage design. Rivet is closer to the cutting edge for 46-percent greater cutting and gripping power than other plier designs&bull Heavy-duty, thicker dipped handles are more comfortable and easier to grab with gloved hands&bull Hot-riveted joint ensures smooth action and no handle wobble&bull Induction hardened cutting knives for long life&bull Streamlined design with sure-gripping, cross-hatched knurled jaws&bull Precision-hardened plier head for on-the-job toughness&bull Unique handle tempering helps absorb the ''snap'' when cutting wire&bull ''Handform'' handles for full gripping and cutting power&bull Custom, US-made tool steel
Qty:
Part #:505612
- Fits K60,K1500,K1500SP,K5208
All- PurposeWind Requires A-368-X Jawset
Qty:
Qty:
Qty:
Part #:509521
- Country of Origin US:
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
closeout
$39.88 MSRP
$
36.30
Part #:511852
- CLOSEOUTS Only 12 Left!
-
7/8" Wire Rope Clip, Forged Carbon Steel, Galvanized(Discontinued being replaced by 490-M253)
Base is Drop-Forged Carbon Steel
Hot Galvanized to ASTM A-153 to Resist Rust and Corrosion
U-Bolts Are colored Blue for Identification Purposes and Use Heavy Duty Hex Nuts (UNC-2A)
Designed to Meet Federal Specifications, FF-C-450, Type 1, Class 1
Designed to Meet or Exceed All Requirements of ASME B30.26 Including Identification, Ductility, Design Factor and Temperature
Permanently Marked with Size and Manufacturer
Sizes 1/4" and Above Marked with USA and Date Code
Sizes 1/8" Through 1-1/4" Are Supplied Bagged and Unassembled
Note See Application and Warning Information
Qty:
Part #:134-J5028H
-
Proto® 6 Point Sockets are ideal for use on stubborn or damaged fasteners, and also on fasteners made from soft materials.
The TorquePlus&trade design is a high performance drive configuration which allows for quick and easy socket engagement to the fastener flats, not the corners.
The TorquePlus&trade configuration employs a radius-corner design, shifting contact area and stress away from the fastener corners and distributing contact stresses over a large area of the socket, minimizing slippage.
The TorquePlus&trade internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fasteners.
Qty:
Part #:500456
- 1/2" Drive 12-Point SAE 7/8" Shallow Socket
&bull SUPERTORQUE® lobular openings for greater turning power without deforming the fastener
&bull Designed for quick engagement on both 6 and 12 point fasteners
Qty:
Part #:500046
- 1/2" Drive 6-Point SAE 7/8" Deep Socket
&bull SUPERTORQUE® lobular openings for greater turning power without deforming the fastener
&bull Designed for maximum engagement on 6 point fasteners
Qty:
Part #:501600
- Hex End L-Wrenches - ProGuard&trade Finish
Chamfered tool tips eliminate burrs and help tools seat in screw head
Sharp corners transfer more torque to the screw and reduce stripping
Precision machined for ease of use and superior fit
Qty:
Part #:504813
- Hex End L-Wrenches - ProGuard&trade Finish
Chamfered tool tips eliminate burrs and help tools seat in screw head
Sharp corners transfer more torque to the screw and reduce stripping
Precision machined for ease of use and superior fit
Qty:
Part #:500477
- 1/2" Drive 12-Point SAE 7/8" Deep Socket
&bull SUPERTORQUE® lobular openings for greater turning power without deforming the fastener
&bull Designed for quick engagement on both 6 and 12 point fasteners
Qty:
Part #:500484
- 3/4" Drive Shallow Sockets, 12-Point, SAE, High Polished Chrome Finish
&bull SUPERTORQUE® lobular openings for greater turning power without deforming the fastener
&bull Designed for quick engagement on both 6 and 12 point fasteners
Qty:
Part #:501162
- 7/8" 12-Point SAE SUPERCOMBO® Black Industrial Finish Combination Wrench
&bull SUPERCOMBO® open end has specially designed grooves that direct wrench force away from fastener corners
&bull SUPERTORQUE® box opening design allows application of higher torque without rounding or deforming hex fastener points. No contact is made at the corners. Instead, wrenching forces are placed on the flat surfaces behind the points
&bull Meets or exceeds AErospace specification AS 954 for 12 point fasteners (as defined by AS 870) to provide accurate torque/tension relationship for precision application
&bull May be used on all common hex (6 point) fasteners with considerable advantage over conventional box end wrenches to increase both hand tool flexibility and economy
&bull Box and open end openings are identical
Qty:
Displaying: 25 - 48 of 74 Matching Items