5-9/16in
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Length: 5-9/16in 6in 12in 141 ft
closeout
$57.85 MSRP
$
33.02
Part #:511955
- Availability: Will be backordered (Typically arrives in 10 days)
-
3/8&rdquo x 6&rdquo Hook & Eye Turnbuckle, Forged Carbon Steel, Galvanized
Drop-Forged Carbon Steel
Galvanized to Meet ASTM A-153 Specifications
5 to 1 Design Factor
Meets Design Requirements of ASTM F1145, Type 1, Grade 1, Class F
IMPORTANT Instructions For Use
Turnbuckles are Designed for a Static Load
In Loads Where There is Vibration, Lock Nuts (Jam Nuts) Should be Used to Prevent the Connection from Turning or Loosening
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
closeout
$70.89 MSRP
$
40.48
Qty:
Qty:
Qty:
Qty:
Part #:508013
-
1/4" Grade 30 Proof Coil Chain, Zinc Plated, 141' per Round Pail
Excellent Low Carbon Steel Chain for General Purpose Applications
Frequently Used for Fabricating Tow Chains, Binding and Logging Chains, Marine and Other General Applications
Standard Finish Zinc Plated or Galvanized
Hallmarking "C3" and "USA" on 5/16" and Larger
Proof Tested
Design Factor 4 to 1
Packaged in Pails, Order Unit is "Each"
Made in the USA
Do Not Use for Overhead Lifting
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:803884
- Description
CHANNELLOCK® Straight Jaw Tongue & Groove Pliers are built to last with a PERMALOCK® fastener to eliminate nut and bolt failure, patented reinforcing edge to minimize stress breakage and laser-hardened teeth to provide a better, longer lasting grip. CHANNELLOCK® Straight Jaw Tongue & Groove Pliers are made in USA and forged from high carbon U.S. steel that is specially coated for ultimate rust prevention.
The ORIGINAL STRAIGHT JAW Tongue & Groove Pliers provide a strong, versatile grip for use in both directions
RELIABLE PERMALOCK® fastener eliminates nut and bolt failure with increased joint strength
STRONG 90-degree, laser-hardened teeth for superior grip and longevity
FORGED high carbon U.S. steel for maximum strength and durability is specially coated for ultimate rust prevention.
UNDERCUT tongue and groove won&rsquot slip
CHANNELLOCK BLUE® grips for comfort
100% MADE IN USA
Qty:
Part #:506900
- Description
CHANNELLOCK® 442 12" Tongue & Groove Pliers feature a unique v-jaw design that creates more points of contact on round stock and tubing. These pliers are built to last with a PERMALOCK® fastener to eliminate nut and bolt failure, patented reinforcing edge to minimize stress breakage and laser-hardened teeth to provide a better, longer lasting grip. CHANNELLOCK® V-JAW Pliers are made in USA and forged from high carbon U.S. steel that is specially coated for ultimate rust prevention.
V-JAWS for more points of contact on round stock and tubing
RELIABLE PERMALOCK® fastener eliminates nut and bolt failure with increased joint strength
STRONG 90-degree, laser-hardened teeth for superior grip and longevity
FORGED high carbon U.S. steel for maximum strength and durability is specially coated for ultimate rust prevention.
UNDERCUT tongue and groove won&rsquot slip
CHANNELLOCK BLUE® grips for comfort
100% MADE IN USA
Qty:
Qty:
Part #:803375
- 3/16-Inch Cabinet Tip Screwdriver 6-Inch
&bull Narrow cabinet tip permits blade access where space is limited&bull Cushion-Grip handle for greater torque and comfort&bull Premium chrome-plated for smooth feel and corrosion resistance&bull Internal flanges inside handle provide solid, twist-resistant blade anchor&bull Special heat-treated shafts&bull Precision-machined tip for exact fit&bull Tip-Ident® quickly identifies the screwdriver type and tip orientation&bull Meets or exceeds applicable ASME / ANSI specifications
Qty:
Part #:506892
- #3 Phillips Screwdriver 6-Inch Round Shank
&bull Precision-machined tip provides accurate fit and torque without slippage&bull Tip-Ident® quickly identifies the screwdriver type and tip orientation&bull Cushion-Grip handle for greater torque and comfort&bull Premium chrome-plated for smooth feel and corrosion resistance&bull Internal flanges inside handle provide solid, twist-resistant blade anchor&bull Special heat-treated shafts&bull Meets or exceeds applicable ASME / ANSI specifications
Qty:
Qty:
Part #:810245
- 6" Cold Chisels 1/2"
The most commonly used chisels in the chisel line
For cutting, shaping and removing metal softer than the cutting edge of the chisel
Qty:
Qty:
Qty:
Part #:729-48-32-4511
- SHOCKWAVE&trade Impact Magnetic Bit Holder
Our SHOCKWAVE&trade Impact Duty&trade Magnetic Bit Holders are engineered for extreme durability and up to 30x life. The MILWAUKEE magnetic bit holders are made from proprietary steel, heat treated to control hardness. The SHOCKWAVE&trade magnetic bit holders feature a powerful magnet, providing you with a secure grip and unyielding bit engagement. Each bit holder has a 2-piece construction for optimal assembly in abusive applications. Our SHOCKWAVE&trade Impact Duty&trade Magnetic Bit Holders can now be used with with Milwaukee SHOCKWAVE&trade Impact Duty Insert Magnetic Nut Drivers (¼&rdquo, 5/16&rdquo, &rdquo, 7/16&rdquo, ½&rdquo).
Qty:
Part #:729-48-22-2822
- 5/16" Slotted - 6" Cushion Grip Screwdriver (Discontinued, Replaced by MT207)
Featuring an anti-peel handle design, hardened tips & forged shanks the Milwaukee® Cushion Grip Screwdrivers provide professional grade solutions and durability to the user. The tactile identification, a new-to-world innovation allows users to accurately select the correct driver without looking. The wrench-ready bolster and precision knurling offers users the features needed to increase effeciency and effectiveness.
Qty:
Part #:508145
- 5/16-Inch Keystone Screwdriver, 6-Inch Square Shank
&bull Heavy-duty square shank for wrench-assisted turning&bull Bolster reinforces shank for hard use&bull Designed for the most demanding uses&bull Cushion-Grip handle for greater torque and comfort&bull Premium chrome-plated for smooth feel and corrosion resistance&bull Internal flanges inside handle provide solid, twist-resistant blade anchor&bull Special heat-treated shafts&bull Precision-machined tip for exact fit&bull Meets or exceeds applicable ASME / ANSI specifications&bull Tip-Ident® quickly identifies the screwdriver type and tip orientation
Qty:
Part #:812981
- 12" Extra-Long Cold Chisels
Designed for cutting, shaping and removing metal softer than the cutting edge of the chisel
Qty:
Qty:
Qty:
Qty:
Part #:810311
- 12" Long Taper Punches
Designed for aligning the holes in metal pieces through which rivets, bolts, or screws will be inserted
Not intended for driving pins as punch may become stuck in work
Also called line-up aligning or drift punches
Qty:
Qty:
Displaying: 1 - 24 of 79 Matching Items