3/16in
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Size: 3/16in 9in 17MM
Part #:502912
-
3/16&rdquo Cold Shut, Steel, Zinc Plated
Connections for Chain and Attachments
When Using Cold Shuts with Chain, Use One Size Larger Than Chain Size
With A Hammer, Drive the Open End Through the Cold Shut Eye. Peen the Extended End to Prevent Opening
Order Unit is "Each"
Note Cold Shuts Should Not Be Reused After Closure Has Been Made
DO NOT EXCEED THE WORKING LOAD LIMIT
Do Not Use for Overhead Lifting or Hoisting
Qty:
Part #:504832
- Hex End L-Wrenches - ProGuard&trade Finish
Chamfered tool tips eliminate burrs and help tools seat in screw head
Sharp corners transfer more torque to the screw and reduce stripping
Precision machined for ease of use and superior fit
Qty:
Qty:
Qty:
Part #:504406
- Lineman's Pliers, New England Nose, 9-Inch
&bull High-leverage design. Rivet is closer to the cutting edge for 46-percent greater cutting and gripping power than other plier designs&bull Hot-riveted joint ensures smooth action and no handle wobble&bull Induction hardened cutting knives for long life&bull Streamlined design with sure-gripping, cross-hatched knurled jaws&bull Unique handle tempering helps absorb the ''snap'' when cutting wire&bull Precision-hardened plier head for on-the-job toughness&bull Plastic-dipped handles for comfort and ease of identification&bull ''Handform'' handles for full gripping and cutting power
Qty:
Part #:502805
-
3/16" Grade 30 Proof Coil Chain, Zinc Plated, 250' per Round Pail
Excellent Low Carbon Steel Chain for General Purpose Applications
Frequently Used for Fabricating Tow Chains, Binding and Logging Chains, Marine and Other General Applications
Standard Finish Zinc Plated or Galvanized
Hallmarking "C3" and "USA" on 5/16" and Larger
Proof Tested
Design Factor 4 to 1
Packaged in Pails, Order Unit is "Each"
Made in the USA
Do Not Use for Overhead Lifting
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:508012
-
3/16" Grade 30 Proof Coil Chain, Zinc Plated, 250' per Round Pail
Excellent Low Carbon Steel Chain for General Purpose Applications
Frequently Used for Fabricating Tow Chains, Binding and Logging Chains, Marine and Other General Applications
Standard Finish Zinc Plated or Galvanized
Hallmarking "C3" and "USA" on 5/16" and Larger
Proof Tested
Design Factor 4 to 1
Packaged in Pails, Order Unit is "Each"
Made in the USA
Do Not Use for Overhead Lifting
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:511937
-
3/16" Wire Rope Thimble, Electro-Galvanized
If Used on Coated Cable, Remove the Coating From the Assembly Area
Follow Assembly Instructions
Qty:
Part #:508146
- 3/16-Inch Cabinet Tip Screwdriver 4-Inch
&bull Narrow cabinet tip permits blade access where space is limited&bull Cushion-Grip handle for greater torque and comfort&bull Premium chrome-plated for smooth feel and corrosion resistance&bull Internal flanges inside handle provide solid, twist-resistant blade anchor&bull Special heat-treated shafts&bull Precision-machined tip for exact fit&bull Tip-Ident® quickly identifies the screwdriver type and tip orientation&bull Meets or exceeds applicable ASME / ANSI specifications
Qty:
Qty:
Part #:810310
- 10" Long Taper Punches
Designed for aligning the holes in metal pieces through which rivets, bolts, or screws will be inserted
Not intended for driving pins as punch may become stuck in work
Also called line-up aligning or drift punches
Qty:
Part #:500171
- 3/8" Drive Standard Length Hex Bit Sockets, SAE, High-Polioshed Chrome Finish
&bull All tools are professional quality, made of high-grade chrome vanadium steel
&bull Sockets feature SUPERTORQUE® lobular openings for greater turning power without deforming the fastener
&bull Metal tool box made for years of rugged use
Qty:
closeout
$362.00 MSRP
$
263.08
Part #:503781
- CLOSEOUTS Only 1 Left!
- 2.25 max HP, 7"/9" Sander
This 13 amp, 5,500 RPM, 2.25 maximum horsepower sander provides high performance and durability for moderately heavy jobs. Sold without accessories, a 7 or 9 inch backing pad and disc can be attached allowing this tool to be used for removing paint or rust from metal, plastic and fiberglass surfaces. Spiral bevel gears transfer maximum torque for heavy duty jobs. Spring loaded recessed spindle lock assists in easy accessory changes. This tool can be converted to a grinder by purchasing either a 7 inch or 9 inch guard and wheel which are easily attached to the tool. Grinding applications remove more material and may be used to shape metal.
Qty:
closeout
$32.19 MSRP
$
21.57
Qty:
Qty:
Part #:507877
- Lineman's Square Nose Pliers, 9-Inch
&bull High-leverage design. Rivet is closer to the cutting edge for 46-percent greater cutting and gripping power than other plier designs&bull Hot-riveted joint ensures smooth action and no handle wobble&bull Induction hardened cutting knives for long life&bull Streamlined design with sure-gripping, cross-hatched knurled jaws&bull Unique handle tempering helps absorb the ''snap'' when cutting wire&bull Precision-hardened plier head for on-the-job toughness&bull Plastic-dipped handles for comfort and ease of identification&bull ''Handform'' handles for full gripping and cutting power&bull Custom, US-made tool steel
Qty:
Part #:806750
- High-Leverage Side-Cutters
&bull High-leverage design. Rivet is closer to the cutting edge for 46-percent greater cutting and gripping power than other plier designs&bull High-leverage design. Rivet is closer to the cutting edge for 46-percent greater cutting and gripping power than other plier designs&bull Induction hardened cutting knives for long life&bull Streamlined design with sure-gripping, cross-hatched knurled jaws&bull Unique handle tempering helps absorb the ''snap'' when cutting wire&bull Precision-hardened plier head for on-the-job toughness&bull ''Handform'' handles for full gripping and cutting power&bull Custom, US-made tool steel
Qty:
Part #:501614
- Heavy Duty Lineman's Pliers, 9-Inch
&bull High-leverage design. Rivet is closer to the cutting edge for 46-percent greater cutting and gripping power than other plier designs&bull Heavy-duty, thicker dipped handles are more comfortable and easier to grab with gloved hands&bull Hot-riveted joint ensures smooth action and no handle wobble&bull Induction hardened cutting knives for long life&bull Streamlined design with sure-gripping, cross-hatched knurled jaws&bull Precision-hardened plier head for on-the-job toughness&bull Unique handle tempering helps absorb the ''snap'' when cutting wire&bull ''Handform'' handles for full gripping and cutting power&bull Custom, US-made tool steel
Qty:
Part #:510262
- 3/16-Inch Cabinet Tip Screwdriver 3-Inch
&bull Narrow cabinet tip permits blade access where space is limited&bull Premium chrome-plated for smooth feel and corrosion resistance&bull Internal flanges inside handle provide solid, twist-resistant blade anchor&bull Special heat-treated shafts&bull Precision-machined tip for exact fit&bull Tip-Ident® quickly identifies the screwdriver type and tip orientation&bull Cushion-Grip handle for greater torque and comfort&bull Meets or exceeds applicable ASME / ANSI specifications
Qty:
Part #:506632
- Coated Flathead Screwdriver, 3/16-Inch Cabinet Tip
&bull Plastic coated for circuit protection only. NOT INSULATED&bull Special plastic coating resists cutting, cracking, and chipping&bull Thin coating permits use in confined areas&bull Cushion-Grip handle for greater torque and comfort&bull Premium chrome-plated for smooth feel and corrosion resistance&bull Internal flanges inside handle provide solid, twist-resistant blade anchor&bull Special heat-treated shafts&bull Precision-machined tip for exact fit&bull Meets or exceeds applicable ASME / ANSI specifications&bull Tip-Ident® quickly identifies the screwdriver type and tip orientation
Qty:
Part #:506354
- Coated 3/16-Inch Cabinet Tip Screwdriver, 6-Inch
&bull Plastic coated for circuit protection only. NOT INSULATED&bull Special plastic coating resists cutting, cracking, and chipping&bull Thin coating permits use in confined areas&bull Cushion-Grip handle for greater torque and comfort&bull Premium chrome-plated for smooth feel and corrosion resistance&bull Internal flanges inside handle provide solid, twist-resistant blade anchor&bull Special heat-treated shafts&bull Precision-machined tip for exact fit&bull Meets or exceeds applicable ASME / ANSI specifications&bull Tip-Ident® quickly identifies the screwdriver type and tip orientation
Qty:
Part #:802782
- Steel Letter Stamp Sets
&bull Letter sets contain 27 pieces A thru Z plusampersand (&)&bull Tempered shanks for extra safety
Qty:
Part #:802783
- Steel Number Stamp Sets
&bull Number sets contain 9 pieces 0 thru 9(the 6 is used as a 9)&bull Crowned striking surface ensures full forceto the center of the stamp & textured shankprovides firm easy grip
Qty:
Qty:
Displaying: 1 - 24 of 49 Matching Items