Ampco Safety
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Manufacturer: Ampco Safety Apex Tool Group Chapin Morse Starrett Sumner Swanson Tools
Part #:841-065-DWI-1/2D1-1/8
- Impact Socket, Socket Size 1 1/8 in, Socket Shape 6-Point, Drive Type Impact, Drive Size 1/2 in
Item Impact Socket
Socket Size 1 1/8 in
Socket Shape 6-Point
Drive Type Impact
Drive Size 1/2 in
Compatible Fastener Type Bolts, Screws
Tether Ready No
Material Nickel Aluminum Bronze
Finish Natural
Impact Rated Yes
Socket Depth Deep
Socket Length 3 3/16 in
Measurement Type SAE
Insulated No
Non-Magnetic Yes
Non-Sparking Yes
$
262.68
Qty:
Part #:841-329-86996
- Extra Large Kneeling Pad
The GEARWRENCH® Kneeling Pad is the super convenient way to keep your knees comfortably off of a hard or rough floor. A built in grab handle makes it easy to position or hang up when not in use. Three layers of high-density solvent resistant foam provide an unmatched degree of cushioning so you can get the job done in comfort. A magnetized recess holds nuts, bolts, and spare parts.
Qty:
Part #:841-065-D-50
- Hand Held Dust Pan Metal, 9 in Overall Dust Pan Wd, 12 in Overall Dust Pan Dp, SilverProduct DetailsNon-SparkingNon-MagneticCorrosion resistantMade in the USABeryllium-freeTesting and ApprovalsFactory Mutual Approved
$
197.76
Qty:
Part #:841-065-M-41
- Combination Wrench Set, Aluminum Bronze, Natural, 7 Number of Tools
Item Combination Wrench Set
Material Aluminum Bronze
Finish Natural
Number of Tools 7
Range of Head Sizes 3/8 in to 7/8 in
Head Offset Angle 15 Degrees
Head Type Offset
Container Type Tool Roll
Measurement Type SAE
Head Size 1/2 in, 3/4 in, 3/8 in, 5/8 in, 7/16 in, 7/8 in, 9/16 in
Opening Type Rounded
Opening Angle (Deg.) 15 Degrees
Tether Style Tether Capable
Non-Magnetic Yes
Nonsparking Yes
Corrosion Resistant Yes
Anti-Slip Design No
Insulated No
Ratcheting No
Reversing No
Container Color Blue
Box End Type 12-Point Box End
Number of Points 12
Range of Lengths 6 5/16 in to 13 1/4 in
Wrench Length Style Standard
Wrench Product Grouping Wrench Sets
Includes Roll Pouch
Standards ASTM A342, ASTM F2503, FM Approved, NFPA
Weight 2.65 lb
Handle Type Ergonomic
$
697.36
SET
Qty:
Part #:841-065-SS-1/2D1-1/4
- Nonsparking Socket, 1/2 in Drive Size, 1 1/4 in Socket Size, 6-Point, Aluminum Bronze
$
143.82
Qty:
Part #:841-065-H-15FG
- Ampco Safety Tools® Double Face Engineers HammersProduct DetailsNon-SparkingNon-MagneticCorrosion resistantMade in the USABeryllium-free
$
142.83
Qty:
Part #:841-065-P-39
- Ampco Safety Tools® Groove Joint PliersProduct DetailsNon-Sparking Non-Magnetic Corrosion resistant Made in the USA Beryllium-free.
$
206.20
Qty:
Part #:512286
- S0101 Speed® Square
The Swanson® Speed®Square was first developed by company founder Albert Swanson in 1925. This innovative tool combines 5 tools into 1 1.Try Square,2.Miter Square,3.Saw Guide, 4.Line Scriber,& 5.Protractor. The Speed®Square is die-cast for durability and accuracy. Made of heavy-gauge aerospace aluminum alloy, it is built to last. Black-filled gradations stand out against a matte finish for easy reading. The Speed® Square includes the Swanson®Blue Book of Rafter Length and Roof Construction and also features markings for using the Swanson® One-Number® Method of rafter layout. The Swanson® Speed® Square is our most popular product and remains the most trusted square of its kind. Look for the Diamond® cutout for genuine Swanson® products.
Features
The Speed® Square, made in the USA since 1925, is essential for every carpenter, construction professional, roofer, and DIYer.
Multi-tool Try square, miter square, saw guide, line scriber, and protractor. For what it does, the Speed® Square belongs on every tradesman's tool bench.
Includes pocket-sized Swanson® Blue Book&mdasha comprehensive reference guide with our One-Number® Method to help workmen make correct angle cuts for any pitched roof.
Features 1/4 in. spaced scribing notches and the Diamond® cutout for easy rafter seat cuts and scribing the most common and popular stud widths
Gradations included for marking common, hip, valley, and jack rafters. Useful for determining and marking angles and making square cuts on boards.
Heavy-gauge billet aluminum alloy construction is die-cast for increased accuracy over laser-etched and extruded stamped rafter squares.
High-visibility, black gradations with a non-glare, matte finish for easy reading in any lighting conditions
Use this Speed® Square to determine out-of-square corners, angles, etc.
When used as a saw guide, the Speed® Square makes truing up a board easy
Look for the trademarked Diamond® cutout on all of our genuine Swanson® products
$
17.22
Qty:
Part #:811450
- 1/2" Drive 1/2" F x 3/8" M Impact Adapter (Replaces Williams BS-131-BA
GEARWRENCH offers a wide range of impact products in open stock & sets that are designed to deliver the performance and strength that the professional users require. They are made from chrome molybdenum alloy steel for exceptional strength and durability. Our sockets have a manganese phosphate coating to resist corrosion. The sockets also feature highly visible laser etched markings and a secondary size hard stamping. The sockets feature off-corner loading to reduce fastener rounding. The GEARWRENCH impact product family will allow the professional user to FORGE AHEAD.
Qty:
Part #:841-065-CR-10-ST
- Chisel, 0.401 in Shank Size, 6 3/4 in Overall Length, Aluminum Bronze
Item Chisel
Non-Sparking Yes
Shank Shape Round
Shank Size 0.401 in
Shank Design Round
Overall Length 6 3/4 in
Material Aluminum Bronze
Point Type Flat Chisel
Chisel Tip Width 1 1/4 in
Chisel Scaler Style Flat
Chisel Collar Type Round
Cutting Application Chisel Off Bolt Heads, Clean Welds, Remove Scale, Scrape Off Paint, Wedged Blade to Cut Metal
Compatible with Product Type Air Hammer
Ampco Safety Tools® Pneumatic Chisels w/Retaining CollarProduct DetailsNon-SparkingNon-MagneticCorrosion resistantMade in the USABeryllium-free
$
98.92
Qty:
Part #:841-065-W-213AL
- Cast Aluminum Pipe Wrenches, 90° Head Angle, Bronze Body Jaw, 18 in
Ampco Safety Tools® Aluminum Adjustable Pipe WrenchesProduct DetailsNon-sparkingNon-magneticCorrosion resistantMade in the USAMost tools Beryllium-free
$
458.70
Qty:
Part #:841-329-80430
- 3/8" Drive Hex Bit Metric Socket 9mm
GEARWRENCH bit sockets have heat treated alloy steel base sockets for durability and long tool life. Our bits are manufactured from S2 steel for maximum strength. The hex bit sockets help users loosen & tighten internal hex fasteners.
Qty:
Part #:841-185-WE1010NA
- For many reasons, the Weller WE 1010 soldering station is a smart soldering solution for several different types of jobs. If you want a powerful tool that gets the job done quickly and reliably, try the WE 1010. This unit has many advantages, but some of its main draws are its
Power With the WE1010NA digital soldering station, you'll have exceptional power to get the job done fast. As the most powerful soldering station in its class, the 120V, 70W power station helps you work efficiently, reliably and precisely. With 40 percent more power than the WES / WESD station, the WEP 70 soldering iron heats up faster and has a shorter recovery time, which helps you produce high-quality results and get more done every time.
Ease of use The WE 1010 is extraordinarily user-friendly. The controls are designed to be intuitive, and the iron features an ergonomic design that's easier to control. The power station features an easy-to-read LCD screen, three push buttons and a power switch on the front of the unit. The iron is lightweight and features a pencil design that makes for comfort and easy maneuvering.
Precision When you use this product, you'll be able to more easily deliver consistently high-quality results. The smooth handling and control that the WEP 70 soldering iron offers and its user-friendly controls contribute to this quality. The excellent temperature stability and accuracy of the unit have a significant impact as well. Additionally, you can use a range of tips and temperatures to reliably get the exact results you need.
Safety WE1010NA has numerous features that will reduce potential hazards throughout your workday. It features a reinforced safety rest that provides extra stability when storing the iron between uses. The cables of the iron are also heat-resistant and meet industry standards for mechanical strength. The unit is also ESD safe and UL and CE certified for electrical safety.
Cost efficiency Despite having all of these incredible features, the WE 1010 is an extremely cost-effective tool. It's an affordable soldering iron overall and also contains elements meant to help you save money as you use it. The ET tips that the iron uses have an extremely long life, which significantly reduces operational costs. It also has a standby mode that the iron automatically enters into when not in use, which helps reduce energy use and further extend the life of your tips.
$
215.67
Qty:
Part #:841-193-7679038
- 020418224010
Swaging Tools, 1/8 in - 3/16 in Rope
Campbell® Swaging ToolsProduct DetailsFor swaging ferrules onto wire rope or cableDo Not use on coated cableIf used on coated cable, remove the coating from the assembly area
Qty:
Part #:841-065-K-20
- Stiff Putty Knife with 2 in Beryllium Copper Blade, Natural
Product DetailsNon-SparkingNon-MagneticCorrosion resistantMade in the USABeryllium-free
$
38.70
Qty:
Part #:841-065-K-21
- Stiff Scraper with 1 1/4 in Nickel Copper Blade, Natural
Ampco Safety Tools® Putty KnivesProduct DetailsNon-SparkingNon-MagneticCorrosion resistantMade in the USABeryllium-free
$
29.16
Qty:
Qty:
Part #:841-182-PQR1316N
- Country of Origin PEOPLE'S REPUBLIC OF CHINA HAZMAT Item NO Special Order Item NO State Restricted NO:
Qty:
Part #:841-192-CDS12N
- Product Category HAND TOOLS/Product Subcategory SOCKETS RATCHETS ADAPTORS & EXTENSIONS
Qty:
Part #:841-403-30209
- Superchuck Ball Bearing Chucks, K30
Jacobs Chuck® Superchuck Ball Bearing ChucksProduct DetailsBall bearing construction maximizes gripping force and drilling accuracyJaws center-ground for straightness and alignmentOne-piece sleeve eliminates crack between driving teeth often found in other designsThrough-hardened sleeve teeth plus hardened nose and keyholes provide outstanding wear resistanceFluted sleeve standard
Qty:
Part #:841-403-30598
- Country of Origin PEOPLE'S REPUBLIC OF CHINA HAZMAT Item NO Special Order Item NO State Restricted NO:
Qty:
Part #:841-432-780441
- Country of Origin UNITED STATES HAZMAT Item NO Special Order Item NO State Restricted NO:
Qty:
Part #:841-505-101
- Country of Origin UNITED STATES/ HAZMAT Item NO/ Special Order Item NO:
Qty:
Part #:841-698-TLL049M
- Country of Origin PEOPLE'S REPUBLIC OF CHINA/ HAZMAT Item NO/ Special Order Item NO:
Qty:
Displaying: 1 - 24 of 39 Matching Items