Ampco Safety
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Manufacturer: Ampco Safety Chapin Mitutoyo Tempil
Part #:841-065-DWI-1/2D1-1/8
- Impact Socket, Socket Size 1 1/8 in, Socket Shape 6-Point, Drive Type Impact, Drive Size 1/2 in
Item Impact Socket
Socket Size 1 1/8 in
Socket Shape 6-Point
Drive Type Impact
Drive Size 1/2 in
Compatible Fastener Type Bolts, Screws
Tether Ready No
Material Nickel Aluminum Bronze
Finish Natural
Impact Rated Yes
Socket Depth Deep
Socket Length 3 3/16 in
Measurement Type SAE
Insulated No
Non-Magnetic Yes
Non-Sparking Yes
$
262.68
Qty:
Part #:841-719-TS0350
- Tempilstik® Temperature Indicators, 350 °F, 6 in
Tempil° Tempilstik® Temperature IndicatorsProduct DetailsRugged and easy-to-useSimple - no gauges or electronicsNo calibration is requiredUnique slip-resistant metal holder, specifically engineered for smooth operation and maximum user controlFree of contaminants such as sulfur, lead and halogensEfficient fast results reduce set up and down timeTesting and ApprovalsNIST Traceable
Qty:
Part #:507066
- Full Flexible Steel Rules
The Mitutoyo Full Flexible Steel Rules provides highly accurate length and other linear measurements on a fully flexible steel ruler.
Graduations 1/8,1/16,1/32,1/64
Width 1/2"
Accuracy +.004 / &ndash.0035" / +0.1 / &ndash0.09(mm)
$
20.66
Qty:
Part #:841-065-D-50
- Hand Held Dust Pan Metal, 9 in Overall Dust Pan Wd, 12 in Overall Dust Pan Dp, SilverProduct DetailsNon-SparkingNon-MagneticCorrosion resistantMade in the USABeryllium-freeTesting and ApprovalsFactory Mutual Approved
$
197.76
Qty:
Part #:507010
- Outside Micrometers
The Mitutoyo outside micrometer features either a ratchet stop or friction thimble that applies constant measuring force on a workpiece for exact repetitive readings. Available in metric and inches.
Series 103 Technical Data
Mechanical
No SPC Output
Carbide Measuring Tips
2" to 3"
Accuracy ±.0001"
Ratchet Stop
$
217.98
Qty:
Part #:507026
- Telescoping Gage Set
The Mitutoyo telescoping gage set features hardened steel plungers triggered by a balanced spring for smooth, reliable inside hole and opening measurements.
Range 0.315" to 2.125"
Set Includes
155-121
155-122
155-123
155-124
$
181.44
Qty:
Part #:841-065-M-41
- Combination Wrench Set, Aluminum Bronze, Natural, 7 Number of Tools
Item Combination Wrench Set
Material Aluminum Bronze
Finish Natural
Number of Tools 7
Range of Head Sizes 3/8 in to 7/8 in
Head Offset Angle 15 Degrees
Head Type Offset
Container Type Tool Roll
Measurement Type SAE
Head Size 1/2 in, 3/4 in, 3/8 in, 5/8 in, 7/16 in, 7/8 in, 9/16 in
Opening Type Rounded
Opening Angle (Deg.) 15 Degrees
Tether Style Tether Capable
Non-Magnetic Yes
Nonsparking Yes
Corrosion Resistant Yes
Anti-Slip Design No
Insulated No
Ratcheting No
Reversing No
Container Color Blue
Box End Type 12-Point Box End
Number of Points 12
Range of Lengths 6 5/16 in to 13 1/4 in
Wrench Length Style Standard
Wrench Product Grouping Wrench Sets
Includes Roll Pouch
Standards ASTM A342, ASTM F2503, FM Approved, NFPA
Weight 2.65 lb
Handle Type Ergonomic
$
697.36
SET
Qty:
Part #:841-065-SS-1/2D1-1/4
- Nonsparking Socket, 1/2 in Drive Size, 1 1/4 in Socket Size, 6-Point, Aluminum Bronze
$
143.82
Qty:
Part #:507020
- Magnetic Stands
The Mitutoyo magnetic stand pertains to all dial indicators and dial test indicators and are available in many different sizes, styles and types.
Applicable holding stem diameter 8,9.53,6mm/3/8"
$
184.80
Qty:
Part #:841-065-H-15FG
- Ampco Safety Tools® Double Face Engineers HammersProduct DetailsNon-SparkingNon-MagneticCorrosion resistantMade in the USABeryllium-free
$
142.83
Qty:
Part #:841-065-P-39
- Ampco Safety Tools® Groove Joint PliersProduct DetailsNon-Sparking Non-Magnetic Corrosion resistant Made in the USA Beryllium-free.
$
206.20
Qty:
Part #:507063
- Full Flexible Steel Rules
The Mitutoyo Full Flexible Steel Rules provides highly accurate length and other linear measurements on a fully flexible steel ruler.
Graduations 1/8,1/16,1/32,1/64
Width 1/2"
Accuracy +.004 / &ndash.0035" / +0.1 / &ndash0.09(mm)
$
20.66
Qty:
Part #:507065
- Full Flexible Steel Rules
The Mitutoyo Full Flexible Steel Rules provides highly accurate length and other linear measurements on a fully flexible steel ruler.
Graduations 1/8,1/16,1/32,1/64
Width 1/2"
Accuracy +.005 / &ndash.0035" / +0.13 / &ndash0.09(mm)
$
40.76
Qty:
Part #:841-065-CR-10-ST
- Chisel, 0.401 in Shank Size, 6 3/4 in Overall Length, Aluminum Bronze
Item Chisel
Non-Sparking Yes
Shank Shape Round
Shank Size 0.401 in
Shank Design Round
Overall Length 6 3/4 in
Material Aluminum Bronze
Point Type Flat Chisel
Chisel Tip Width 1 1/4 in
Chisel Scaler Style Flat
Chisel Collar Type Round
Cutting Application Chisel Off Bolt Heads, Clean Welds, Remove Scale, Scrape Off Paint, Wedged Blade to Cut Metal
Compatible with Product Type Air Hammer
Ampco Safety Tools® Pneumatic Chisels w/Retaining CollarProduct DetailsNon-SparkingNon-MagneticCorrosion resistantMade in the USABeryllium-free
$
98.92
Qty:
Part #:841-065-W-213AL
- Cast Aluminum Pipe Wrenches, 90° Head Angle, Bronze Body Jaw, 18 in
Ampco Safety Tools® Aluminum Adjustable Pipe WrenchesProduct DetailsNon-sparkingNon-magneticCorrosion resistantMade in the USAMost tools Beryllium-free
$
458.70
Qty:
Part #:841-065-K-20
- Stiff Putty Knife with 2 in Beryllium Copper Blade, Natural
Product DetailsNon-SparkingNon-MagneticCorrosion resistantMade in the USABeryllium-free
$
38.70
Qty:
Part #:841-065-K-21
- Stiff Scraper with 1 1/4 in Nickel Copper Blade, Natural
Ampco Safety Tools® Putty KnivesProduct DetailsNon-SparkingNon-MagneticCorrosion resistantMade in the USABeryllium-free
$
29.16
Qty:
Part #:841-504-293-348-30
-
0 - 1" X .00005"/0.001mm IP65 Digimatic Outside Micrometer, No SPC Output, Friction
IP65 Waterproof rated
Auto On/Off
Friction Thimble
Carbide measuring faces
Supplied in fitted plastic case
Product Specifications
STYLEGeneral Purpose
TYPEMicrometer
BATTERY TYPESR44
RESOLUTION/GRADUATION INCHES0.001
ANVIL SHAPESpherical
MINIMUM MEASUREMENT INCHES0
DATA OUTPUTNo
MEASURING FACE MATERIALCarbide
METRIC OR INCHInch,Metric
UPC603908585992
MECHANICAL OR DIGITALDigital
MINIMUM MEASUREMENT MM0
PARALLELISM.00004 In
MAXIMUM MEASUREMENT MM25.4
ACCURACY (+/- ) INCHES0.00005
INSIDE DIAMETER CONTACT POINT MATERIAL --
ACCURACY (+/-) MM0.001
SERIESDigimatic
THIMBLE TYPERatchet Friction
LONG FORM CALIBRATION CERTIFICATE INCLUDEDNo
IP RATINGIP65
MAXIMUM MEASUREMENT INCHES1
RESOLUTION/GRADUATION MM0.001
BRANDMitutoyo
CASEYes
DIAL FACE COLOR--
MINIMUM OUTSIDE DIAMETER - INCHIP65
FRACTION OPTIONNo
MANUFACTURERS PART NUMBER293-348-30
DIGITALYes
ROTATING SPINDLENo
POWER SOURCEBattery
$
285.52
Qty:
Part #:841-504-500-196-30
- Mitutoyo Series 500 Standard Type Digimatic Calipers with Thumb RollerProduct DetailsLarge and clear LCD readoutThe ZERO/ABS key allows the display to be Zero-Set at any slider position along the scale for incremental comparison measurementsThumb roller included
$
223.56
Qty:
Part #:841-504-182-105
- Series 182 Steel Rulers, 6 in, Wide, Stainless Steel, Inch/Metric, Rigid
UPC 603908050759
Mitutoyo Series 182 Steel RulersProduct DetailsEasy to readClear graduations on satin-chrome finishStainless Tempered
$
22.06
Qty:
Part #:841-139-20002
- 20002 2-Gallon Lawn and Garden Sprayer
The Chapin 2-Gallon Poly Lawn and Garden sprayer is ideal for weed control, pest control, and fertilizers.Ergonomic pump handle makes pumping and carrying easy. Lightweight, polyethylene translucent tank making it easy to check fluid levels.
2-Gallon funnel-top, translucent tank for easy filling and cleaning
Compatible with common fertilizers, weed killers and pesticides
In-tank filter
Includes a 12-inch wand, 34-inch reinforced hose, adjustable nozzle and comfortable spray handle
Ergonomic handle for easy pumping and carrying
Applications weed and pest control, fungus control,fertilizers
$
35.22
Qty:
Part #:841-504-193-212
- Country of Origin JAPAN. HAZMAT Item NO. Special Order Item YES. State Restricted NO:
$
326.34
Qty:
Part #:841-065-W-651
- Combination Wrench, Aluminum Bronze Nickel, Natural, 11/16 in Head Size, 9 1/4 in Overall Length
Ampco Safety Tools® Combination WrenchesProduct DetailsNon-sparkingNon-magneticCorrosion resistantMade in the USABeryllium-freeTesting and ApprovalsFactory Mutual Approved
$
109.56
Qty:
Part #:841-065-B-400
- Conforms to ASTM F2503 Meets the requirements established by ASTM A342 :
$
44.68
Qty:
Displaying: 1 - 24 of 24 Matching Items