Ampco
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Brand: Ampco Black & Decker (U.s.) General Tool
Part #:841-065-DWI-1/2D1-1/8
- Impact Socket, Socket Size 1 1/8 in, Socket Shape 6-Point, Drive Type Impact, Drive Size 1/2 in
Item Impact Socket
Socket Size 1 1/8 in
Socket Shape 6-Point
Drive Type Impact
Drive Size 1/2 in
Compatible Fastener Type Bolts, Screws
Tether Ready No
Material Nickel Aluminum Bronze
Finish Natural
Impact Rated Yes
Socket Depth Deep
Socket Length 3 3/16 in
Measurement Type SAE
Insulated No
Non-Magnetic Yes
Non-Sparking Yes
$
239.87
Qty:
Part #:804543
- Tap Wrench for No. 0 to 1/4 In. Taps
The #164 Tap Wrench for No. 0 to 1/4 In. Taps is designed to hold and turntaps&mdashtools that cut threads on the inner surface of a hole or pipe&mdashor other small tools, such as hand reamers and screw extractors.
Length 2-7/8 in.
Qty:
Part #:506847
- Product Description
The #377 Welding Magnet with 50 Lb. Pull eliminates the need for clamps or temporary fasteners.
Features
Holds steel plates at any of five angles
Specifications
Magnetic pull force 50 lb.
Holding angles 30°, 45°, 60°, 75°, 90°
- See more at https//www.generaltools.com/welding-magnet-with-50-lb-pull#sthash.iQYGXUbb.dpuf
Qty:
Part #:502753
- The #300/1 Industrial Precision 6 In. Flexible Steel Rule can make very precise measurements.
Features
Ultra-fine black graduations
Polished stainless steel finish
Pocket clip
Includes
Plastic sleeve
Dimensions
6 x 3-7/8 in.
Qty:
Part #:841-065-D-50
- Hand Held Dust Pan Metal, 9 in Overall Dust Pan Wd, 12 in Overall Dust Pan Dp, SilverProduct DetailsNon-SparkingNon-MagneticCorrosion resistantMade in the USABeryllium-freeTesting and ApprovalsFactory Mutual Approved
$
180.82
Qty:
Part #:800387
- Five-blade Screwdriver Set
The #S605 Five-blade Screwdriver Set includes slotted and crosspoint blades.
Qty:
Part #:510965
- Tungsten Carbide Point Scriber/Etching Pen with MagnetThe #88CM Tungsten Carbide Point Scriber/Etching Pen with Magnet can mark and scribe steel, ceramic and glass. The magnet can retrieve small ferrous and steel parts and chips from hard-to-reach places.
Point diameter 1/16 in. (1.6mm)
Qty:
Part #:841-065-P-39
- Ampco Safety Tools® Groove Joint PliersProduct DetailsNon-Sparking Non-Magnetic Corrosion resistant Made in the USA Beryllium-free.
$
188.55
Qty:
Part #:841-065-M-41
- Combination Wrench Set, Aluminum Bronze, Natural, 7 Number of Tools
Item Combination Wrench Set
Material Aluminum Bronze
Finish Natural
Number of Tools 7
Range of Head Sizes 3/8 in to 7/8 in
Head Offset Angle 15 Degrees
Head Type Offset
Container Type Tool Roll
Measurement Type SAE
Head Size 1/2 in, 3/4 in, 3/8 in, 5/8 in, 7/16 in, 7/8 in, 9/16 in
Opening Type Rounded
Opening Angle (Deg.) 15 Degrees
Tether Style Tether Capable
Non-Magnetic Yes
Nonsparking Yes
Corrosion Resistant Yes
Anti-Slip Design No
Insulated No
Ratcheting No
Reversing No
Container Color Blue
Box End Type 12-Point Box End
Number of Points 12
Range of Lengths 6 5/16 in to 13 1/4 in
Wrench Length Style Standard
Wrench Product Grouping Wrench Sets
Includes Roll Pouch
Standards ASTM A342, ASTM F2503, FM Approved, NFPA
Weight 2.65 lb
Handle Type Ergonomic
$
637.71
SET
Qty:
Part #:841-065-SS-1/2D1-1/4
- Nonsparking Socket, 1/2 in Drive Size, 1 1/4 in Socket Size, 6-Point, Aluminum Bronze
Qty:
Part #:841-065-H-15FG
- Ampco Safety Tools® Double Face Engineers HammersProduct DetailsNon-SparkingNon-MagneticCorrosion resistantMade in the USABeryllium-free
$
130.60
Qty:
Part #:512032
- Magnetic Pick Up Tool with Rigid Or Flexible Shaft Extends From 18-inches to 32-Inched, 2lb Pull Capacity Grabber/Retrieving Magnet
Ideal for retrieving steel and iron parts from hard-to-reach and see work areas, the General Tools 384N Flexible Telescoping Magnetic Pick-Up is a great combination tool for retrieving lost items from confined areas. Equipped with a powerful 2 lb. pull Neodymium magnet the shaft can be either rigid or flexible by simply unscrewing the handle and removing the steel shaft. Without the shaft, the pick can easily snake around objects to retrieve lost items. The shaft can extend from 18" (457mm) to 32" (813mm).
Qty:
Part #:807557
- ANGLE-IZER® Contour Gauge, Profile Gauge, Shape Duplicator, 10-Inch
PRECISE SHAPE DUPLICATION- Easily copy any shape or duplicate a profile exactly for woodworking or tile flooring/linoleum installation where you want to replicate the shape of moldings or match cut outs around door casings and pipe
PERFECT PROFILES- 3" (76mm) deep fingers will measure profiles up to 1-1/4" (32mm) precisely record the cross-sectional shape of a surface
EXTRA LENGTH- 10&rdquo gauge is ideal for woodworking, linoleum installation, ceramic tile installation or any job where contour duplication is essential
Qty:
Part #:507204
- Product Description
The #SPC75 4 In. Drive Pin Punches, Eight-piece Set is ideal for removing metal pins from holes in machine shops and motor service bays.
Features
Made of hardened, tempered and heat-treated tool steel
Ground square ends
Knurled finger grips
Qty:
Part #:808000
- 6 In. Carbon Fiber Digital CaliperThe #146 6 In. Carbon Fiber Digital Caliper can make inside, outside, depth and step measurements in inches or millimeters.
Qty:
Part #:804527
- Drill Bit Gauge, 1/16&rdquo to ½&rdquo By 64ths Fractional Size With Decimal Equivalents, Stainless Steel
The 14 Drill Gauge helps to quickly and conveniently determine the size of a fractional drill bit. The durable, stainless steel gauge measures drill bits from 1/16 in. to ½ in. by 64ths. The sizes are all permanently etched into the gauge and also show the criminal equivalents. The gauge&rsquos size is 6-1/2 x 2-1/2 inches wide.
6-1/2 x 2-1/2 in.Accuracy ±1/64 in
Qty:
Part #:804511
- Product Description
The #818 Scratch Awl is ideal for scribing and layout work, starting screw holes and piercing soft materials.
Blade length 2-3/4 in.
Overall length 6-1/2 in.
Qty:
Part #:804517
- Drill Bit Grinding AttachmentThe #825 Drill Bit Grinding Attachment can hone drill bits to their original sharpness, extending their life and improving drilling accuracy.
Works with 1/8 to 3/4 in., #1 to #30, A to Z, and 3 to 19mm drill bits
Qty:
Part #:800083
- 24 in. Lighted Mechanical PickupThe #70396 24 In. Lighted Mechanical Pickup is ideal for retrieving items from dark or hard-to-reach places.
Qty:
Part #:800086
- Lighted Tweezer with Smooth Point Tip
The #70401 Lighted Tweezer with Smooth Point Tip is ideal for retrieving items from dark or hard-to-reach places.
Qty:
Part #:812217
- Automatic Center PunchThe #77 Automatic Center Punch can punch, mark, scribe and start drill, nail or screw holes. It is ideal for machinists and automotive repair pros.
Qty:
Part #:814555
- Replacement Point for #78 Heavy-duty Center Punch
Point diameter 0.083 in. (2.1mm)
Qty:
Part #:512030
- Product Description
The #80 Fixed Two Point Scriber is preferred by machinists, engravers, mechanics and craftspeople for use on metal, glass, plastics and ceramics.
Features
Aluminum body with knurled finger grip and two fixed, hardened and ground steel points straight and 90°
Qty:
Part #:804477
- Tungsten Carbide Point Scriber/Etching PenThe #88 Tungsten Carbide Point Scriber/Etching Pen can mark and scribe steel, ceramic and glass.
Point diameter 1/16 in. (1.6mm)
Qty:
Displaying: 1 - 24 of 62 Matching Items