Ampco
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Brand: Ampco Felo Ingersol Rand Swanson
Part #:841-065-DWI-1/2D1-1/8
- Impact Socket, Socket Size 1 1/8 in, Socket Shape 6-Point, Drive Type Impact, Drive Size 1/2 in
Item Impact Socket
Socket Size 1 1/8 in
Socket Shape 6-Point
Drive Type Impact
Drive Size 1/2 in
Compatible Fastener Type Bolts, Screws
Tether Ready No
Material Nickel Aluminum Bronze
Finish Natural
Impact Rated Yes
Socket Depth Deep
Socket Length 3 3/16 in
Measurement Type SAE
Insulated No
Non-Magnetic Yes
Non-Sparking Yes
$
239.87
Qty:
Part #:841-383-2925RB2TI
- Product DetailsCompact size with high power outputPower regulator is fully adjustableContoured handleEasy-to-service
$
4,660.62
Qty:
Part #:841-383-116K
- Air Hammer Kit, Standard Duty, 2 5/8 in Stroke L, 3,500 blows/min, w/5 Chisels
Ingersoll-Rand Air HammersProduct DetailsAccurate and easily controlled tease throttleStandard beehive retainer - allows use of a wide variety of accessoriesModel 772 - Unitized "easy-out" throttle valve assemblyFurnished with two retainers for use with a wide variety of accessoriesIncludes(5) Chisels
Qty:
Part #:510696
- 2145QiMAX 2155QiMAX Series Impact Wrench
The Ingersoll Rand 2145QiMAX 3/4" Impact Wrench delivers incredible performance and industrial-grade durability in an impact wrench. Plus, its efficient air motor reduces air consumption to save you money. Perfect for the most demanding applications, such as truck and bus service, construction and agricultural equipment maintenance, as well as the MRO market.
$
651.52
Qty:
Part #:510697
- The Ingersoll Rand 2155QiMAX 1" Impact Wrench delivers incredible performance and industrial-grade durability in an impact wrench. Plus, its efficient air motor reduces air consumption to save you money. Perfect for the most demanding applications, such as truck and bus service, construction and agricultural equipment maintenance, as well as the MRO market.
$
849.15
Qty:
Part #:841-065-D-50
- Hand Held Dust Pan Metal, 9 in Overall Dust Pan Wd, 12 in Overall Dust Pan Dp, SilverProduct DetailsNon-SparkingNon-MagneticCorrosion resistantMade in the USABeryllium-freeTesting and ApprovalsFactory Mutual Approved
$
180.82
Qty:
Part #:841-065-M-41
- Combination Wrench Set, Aluminum Bronze, Natural, 7 Number of Tools
Item Combination Wrench Set
Material Aluminum Bronze
Finish Natural
Number of Tools 7
Range of Head Sizes 3/8 in to 7/8 in
Head Offset Angle 15 Degrees
Head Type Offset
Container Type Tool Roll
Measurement Type SAE
Head Size 1/2 in, 3/4 in, 3/8 in, 5/8 in, 7/16 in, 7/8 in, 9/16 in
Opening Type Rounded
Opening Angle (Deg.) 15 Degrees
Tether Style Tether Capable
Non-Magnetic Yes
Nonsparking Yes
Corrosion Resistant Yes
Anti-Slip Design No
Insulated No
Ratcheting No
Reversing No
Container Color Blue
Box End Type 12-Point Box End
Number of Points 12
Range of Lengths 6 5/16 in to 13 1/4 in
Wrench Length Style Standard
Wrench Product Grouping Wrench Sets
Includes Roll Pouch
Standards ASTM A342, ASTM F2503, FM Approved, NFPA
Weight 2.65 lb
Handle Type Ergonomic
$
637.71
SET
Qty:
Part #:841-065-SS-1/2D1-1/4
- Nonsparking Socket, 1/2 in Drive Size, 1 1/4 in Socket Size, 6-Point, Aluminum Bronze
Qty:
Part #:510692
- 231 Series Impact Wrench
The heavy duty 231C impact wrench has the reliability and durability you&rsquove come to expect from the Ingersoll Rand name. The powerful tool provides an even impact and is durable enough to last through the toughest work environments.
Qty:
Part #:841-065-H-15FG
- Ampco Safety Tools® Double Face Engineers HammersProduct DetailsNon-SparkingNon-MagneticCorrosion resistantMade in the USABeryllium-free
$
130.60
Qty:
Part #:841-383-1105MAX-D3
- 1105MAX Series Premium Mini Ratchet Wrench
The 1105MAX Series is our top-of-the-line, premium mini impact wrenches. These air ratchets offer best-in-class power and speed with features like enhanced corrosion resistance and an ultra-comfortable housing.
Increased Access & Reach These mini ratchet wrenches let you get into deep, tight, and hard-to-reach places.
Long-Lasting Comfort The composite housing and handle insulates from the cold and ensures operator comfort even during extended use.
Trusted Durability The 1105MAX Series can withstand harsh environments and repeated drops.
Qty:
Part #:841-383-2235QTIMAX
- Specifications Air Consumption [Nom] 6 CPM Brand INGERSOLL-RAND Control Type Trigger Country of Origin US Cycle Rate [Nom] 1,220 blows per minute Drive Size [Nom] 1/2 in Drive Type Square Free Speed [Nom] 8,500 rpm Handle Type Pistol Hazmat NO Hose Size [Nom] 3/8 in Inlet Size 1/4 in Length [Nom] 7.6 in MPI Catalog YES Noise Level [Max] 88.7 dB Rank Rank_E Retainer Type O-Rings Torque [Max] 1,300 ft lb; 900 ft lb (reverse) Torque [Min] 900 ft lb Wt. 4.7 lb :
Qty:
Part #:841-383-307B
- Ingersoll-Rand 301 Series Die Grinders 0.25 HPProduct DetailsIt can be used with all types of accessories for porting, weld breaking, and smoothing sharp edges, as well as deburring, polishing, and grindingSuperior maneuverabilitySafety lever prevents accidental startsFront exhaust helps keep work surface cleanVersatile and reliableEasy-to-use, integral safety-lock throttle lever prevents accidental start-upSmall and lightweight design provides easy operation greater access to tight spotsStrong aluminum housing withstands tough operating conditionsTool comes with both a 1/4 in and 6mm collets and two wrenchesIncludesTool1/4 in nd 6mm Collets
Qty:
Part #:841-065-P-39
- Ampco Safety Tools® Groove Joint PliersProduct DetailsNon-Sparking Non-Magnetic Corrosion resistant Made in the USA Beryllium-free.
$
188.55
Qty:
Part #:512286
- S0101 Speed® Square
The Swanson® Speed®Square was first developed by company founder Albert Swanson in 1925. This innovative tool combines 5 tools into 1 1.Try Square,2.Miter Square,3.Saw Guide, 4.Line Scriber,& 5.Protractor. The Speed®Square is die-cast for durability and accuracy. Made of heavy-gauge aerospace aluminum alloy, it is built to last. Black-filled gradations stand out against a matte finish for easy reading. The Speed® Square includes the Swanson®Blue Book of Rafter Length and Roof Construction and also features markings for using the Swanson® One-Number® Method of rafter layout. The Swanson® Speed® Square is our most popular product and remains the most trusted square of its kind. Look for the Diamond® cutout for genuine Swanson® products.
Features
The Speed® Square, made in the USA since 1925, is essential for every carpenter, construction professional, roofer, and DIYer.
Multi-tool Try square, miter square, saw guide, line scriber, and protractor. For what it does, the Speed® Square belongs on every tradesman's tool bench.
Includes pocket-sized Swanson® Blue Book&mdasha comprehensive reference guide with our One-Number® Method to help workmen make correct angle cuts for any pitched roof.
Features 1/4 in. spaced scribing notches and the Diamond® cutout for easy rafter seat cuts and scribing the most common and popular stud widths
Gradations included for marking common, hip, valley, and jack rafters. Useful for determining and marking angles and making square cuts on boards.
Heavy-gauge billet aluminum alloy construction is die-cast for increased accuracy over laser-etched and extruded stamped rafter squares.
High-visibility, black gradations with a non-glare, matte finish for easy reading in any lighting conditions
Use this Speed® Square to determine out-of-square corners, angles, etc.
When used as a saw guide, the Speed® Square makes truing up a board easy
Look for the trademarked Diamond® cutout on all of our genuine Swanson® products
Qty:
Part #:841-065-CR-10-ST
- Chisel, 0.401 in Shank Size, 6 3/4 in Overall Length, Aluminum Bronze
Item Chisel
Non-Sparking Yes
Shank Shape Round
Shank Size 0.401 in
Shank Design Round
Overall Length 6 3/4 in
Material Aluminum Bronze
Point Type Flat Chisel
Chisel Tip Width 1 1/4 in
Chisel Scaler Style Flat
Chisel Collar Type Round
Cutting Application Chisel Off Bolt Heads, Clean Welds, Remove Scale, Scrape Off Paint, Wedged Blade to Cut Metal
Compatible with Product Type Air Hammer
Ampco Safety Tools® Pneumatic Chisels w/Retaining CollarProduct DetailsNon-SparkingNon-MagneticCorrosion resistantMade in the USABeryllium-free
$
90.47
Qty:
$
6.97
Qty:
Part #:841-065-W-213AL
- Cast Aluminum Pipe Wrenches, 90° Head Angle, Bronze Body Jaw, 18 in
Ampco Safety Tools® Aluminum Adjustable Pipe WrenchesProduct DetailsNon-sparkingNon-magneticCorrosion resistantMade in the USAMost tools Beryllium-free
$
419.45
Qty:
Part #:841-383-7802RA
- Ingersoll-Rand Pneumatic Drills, 3/8 in Chuck, 1/2 hp, 2,000 rpm
Ingersoll-Rand Pneumatic DrillsProduct DetailsQuick reverse leverVariable speed throttle for starting holes easilyHeavy duty ball and needle bearingMore power and long tool lifePlanetary gear reduction balances the load
Qty:
Part #:841-065-K-20
- Stiff Putty Knife with 2 in Beryllium Copper Blade, Natural
Product DetailsNon-SparkingNon-MagneticCorrosion resistantMade in the USABeryllium-free
$
35.33
Qty:
Part #:841-065-K-21
- Stiff Scraper with 1 1/4 in Nickel Copper Blade, Natural
Ampco Safety Tools® Putty KnivesProduct DetailsNon-SparkingNon-MagneticCorrosion resistantMade in the USABeryllium-free
$
26.63
Qty:
Part #:841-383-1A2SA
- Country of Origin PEOPLE'S REPUBLIC OF CHINA HAZMAT Item NO Special Order Item YES State Restricted NO:
$
954.35
Qty:
Part #:841-383-302B
- Country of Origin PEOPLE'S REPUBLIC OF CHINA/ HAZMAT Item NO/ Special Order Item NO:
Qty:
Part #:841-383-NS11-122-19
- Ingersoll Rand Needle SetsProduct DetailsDesigned for use with needle scalers, this needle set can help to remove rust, paint, dirt, and weld on metal surfacesThe metal rods pulsate and vibrate during use to loosen excess material, even in tight spaces, corners, and on curved surfaces
$
33.78
ST
Qty:
Displaying: 1 - 24 of 44 Matching Items