Anchor Brand
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Brand: Anchor Brand Black & Decker (U.s.) Crescent Idsc Holdings Llc Wal-Board
closeout
$36.39 MSRP
$
24.38
Qty:
Part #:501143
- 8" Adjustable Black Oxide Wrench - Carded
Crescent Adjustable Wrenches feature a large knurl for easy adjustment and a tight jaw fit. Its hex jaw design helps reduce slippage and tightly grips the fastener for solid, secure operation, while the corrosion-resistant black oxide finish helps prevent rusting. A wide handle design provides comfort and reduces fatigue during extended use, ideal for both pros and do-it-yourself enthusiasts.
Qty:
Part #:511253
- COO CN Prop 65 :
- WARNING
Qty:
closeout
$25.67 MSRP
$
18.60
Part #:511464
- CLOSEOUTS Only 5 Left!
- 10" Nail Puller (Discontinued being replaced by NPWC10)
Tackle your next renovation or demolition project with the latest innovations from Crescent. Our new tools are designed around powerful innovations that allow the user to attack projects from the best angle, adjust your tool to fit the task at hand, and just get the job done faster and easier than before. This series of tools offers a wide array of demolition and renovation tools. All Crescent pry bars have precision ground edges that make it easier to access tight spaces and help minimize damage to finished areas, as well as a crow bar end with a nail puller slot for standard crow bar use. Durable two-tone dual material grips provide comfort, control, and added safety.
Qty:
closeout
$31.14 MSRP
$
20.86
Qty:
closeout
$64.85 MSRP
$
43.45
Part #:504410
- CLOSEOUTS Only 3 Left!
- (Discontinued being replaced by AC212VS)
Qty:
Part #:510926
- 180 Piece 1/4" and 3/8" Drive 6 Point SAE/Metric Professional Tool Set
Crescent mechanics tools are made from Chrome alloy steel which is specially formulated and heat-treated for high strength and superior resistance to abrasion and corrosion. Wrenches, ratchets, sockets, and drive tools all have a flawless chrome finish to extend tool life. The sockets & the box end of the combination wrenches both feature off-corner loading which reduces fastener rounding. The wide selection of Crescent tools satisfies today&rsquos rigorous mechanics tool demands.
Qty:
Part #:513002
-
The Wal-Board 2 in. Putty Knife w/ Plastic Handle PK-2 features
High carbon steel blades uniformly tapered for proper flex
High impact, molded plastic handle
$
5.97
Qty:
Part #:811253
- 21 Piece 3/4" Drive 12 Point Standard SAE Mechanics Tool Set
The CRESCENT mechanic's tool sets are professional tool sets contain tools for industrial jobs. They come with durable, full polish Crestoloy® alloy steel ratchets, drive tools, and sockets that are reliable and resist rust and wear. The blow-molded case has a designated spot for each tool.
Contents
CRW19N
3/4" Drive 45-Tooth Quick Release Round Head Ratchet 20"
CDS100N
3/4" Drive 12 Point Standard SAE Socket 1-7/16"
CDS101N
3/4" Drive 12 Point Standard SAE Socket 1-1/2"
CDS102N
3/4" Drive 12 Point Standard SAE Socket 1-5/8"
CDS104N
3/4" Drive 12 Point Standard SAE Socket 1-3/4"
CDS105N
3/4" Drive 12 Point Standard SAE Socket 1-13/16"
CDS106N
3/4" Drive 12 Point Standard SAE Socket 1-7/8"
CDS107N
3/4" Drive 12 Point Standard SAE Socket 2"
CDS91N
3/4" Drive 12 Point Standard SAE Socket 7/8"
CDS92N
3/4" Drive 12 Point Standard SAE Socket 15/16"
CDS93N
3/4" Drive 12 Point Standard SAE Socket 1"
CDS94N
3/4" Drive 12 Point Standard SAE Socket 1-1/16"
CDS95N
3/4" Drive 12 Point Standard SAE Socket 1-1/8"
CDS97N
3/4" Drive 12 Point Standard SAE Socket 1-1/4"
CDS98N
3/4" Drive 12 Point Standard SAE Socket 1-5/16"
CDS99N
3/4" Drive 12 Point Standard SAE Socket 1-3/8"
CRW20N
3/4" Drive Extension 4"
CRW21N
3/4" Drive Extension 8"
CRW22N
3/4" Drive Extension 16"
CRW23N
3/4" Drive Flex Handle/Breaker Bar 19"
Qty:
Part #:510924
- 70 Piece 1/4" & 3/8" Drive 6 & 12 Point Standard SAE/Metric Mechanics Tool Set
The CRESCENT mechanics tool sets are professional tool sets contain tools for industrial jobs. They come with durable, full polish chrome alloy steel ratchets, drive tools, and sockets that are reliable and resist rust and wear. Also included in the CTK70C are full polish combination wrenches, bits, and hex keys. The heavy-duty blow-molded case with a designated spot for each tool.
Contents
CDS0N
1/4" Drive 6 Point Standard SAE Socket 5/32"
CDS11N
1/4" Drive 6 Point Standard Metric Socket 4mm
CDS12N
1/4" Drive 6 Point Standard Metric Socket 5mm
CDS13N
1/4" Drive 6 Point Standard Metric Socket 6mm
CDS14N
1/4" Drive 6 Point Standard Metric Socket 7mm
CDS15N
1/4" Drive 6 Point Standard Metric Socket 8mm
CDS16N
1/4" Drive 6 Point Standard Metric Socket 9mm
CDS17N
1/4" Drive 6 Point Standard Metric Socket 10mm
CDS18N
1/4" Drive 6 Point Standard Metric Socket 11mm
CDS19N
1/4" Drive 6 Point Standard Metric Socket 12mm
CDS1N
1/4" Drive 6 Point Standard SAE Socket 3/16"
CDS2N
1/4" Drive 6 Point Standard SAE Socket 7/32"
CDS3N
1/4" Drive 6 Point Standard SAE Socket 1/4"
CDS4N
1/4" Drive 6 Point Standard SAE Socket 9/32"
CDS5N
1/4" Drive 6 Point Standard SAE Socket 5/16"
CDS6N
1/4" Drive 6 Point Standard SAE Socket 11/32"
CDS7N
1/4" Drive 6 Point Standard SAE Socket 3/8"
CDS8N
1/4" Drive 6 Point Standard SAE Socket 7/16"
CDS25N
3/8" Drive 12 Point Standard SAE Socket 3/8"
CDS26N
3/8" Drive 12 Point Standard SAE Socket 7/16"
CDS27N
3/8" Drive 12 Point Standard SAE Socket 1/2"
CDS28N
3/8" Drive 12 Point Standard SAE Socket 9/16"
CDS29N
3/8" Drive 12 Point Standard SAE Socket 5/8"
CDS30N
3/8" Drive 12 Point Standard SAE Socket 11/16"
CDS31N
3/8" Drive 12 Point Standard SAE Socket 3/4"
CDS40N
3/8" Drive 12 Point Standard Metric Socket 10mm
CDS41N
3/8" Drive 12 Point Standard Metric Socket 11mm
CDS42N
3/8" Drive 12 Point Standard Metric Socket 12mm
CDS43N
3/8" Drive 12 Point Standard Metric Socket 13mm
CDS44N
3/8" Drive 12 Point Standard Metric Socket 14mm
CDS45N
3/8" Drive 12 Point Standard Metric Socket 15mm
CDS47N
3/8" Drive 12 Point Standard Metric Socket 17mm
CDTA6C
1/4" Drive Extension 2"
CDTA8C
3/8" Drive Extension 3"
CR14
1/4" Drive 72-Tooth Quick Release Teardrop Ratchet 5"
CRW25C
1/4" Drive Dual Material Bit Holding Screwdriver Handle
CR38
3/8" Drive 72-Tooth Quick Release Teardrop Ratchet 8.5"
Qty:
Part #:501142
- 10" Adjustable Wrench - Boxed
Since the introduction of the original Crescent wrench in the early 1900s, the Crescent brand has become synonymous with adjustable wrenches. Crescent Adjustable Wrenches feature a large knurl for easy adjustment and a tight jaw fit. Its hex jaw design helps reduce slippage and tightly grips the fastener for solid, secure operation, while the corrosion-resistant chrome finish helps prevent rusting. A wide handle design provides comfort and reduces fatigue during extended use. The Crescent adjustable wrenches are ideal for both pros and do-it-yourself enthusiasts.
Qty:
Part #:510925
- 150 Piece 1/4" and 3/8" Drive 6 Point SAE/Metric Professional Tool Set
Crescent mechanics tools are made from Chrome alloy steel which is specially formulated and heat-treated for high strength and superior resistance to abrasion and corrosion. Wrenches, ratchets, sockets, and drive tools all have a flawless chrome finish to extend tool life. The sockets & the box end of the combination wrenches both feature off-corner loading which reduces fastener rounding. The wide selection of Crescent tools satisfies today&rsquos rigorous mechanics tool demands.
Qty:
Part #:810157
- Adjustable Wrench 4" Chrome
&bull Chrome Finish
&bull 4"
Qty:
Part #:510405
- 8" SAE Adjustable Industrial Black Finish Wrench
&bull Slim head with tapered jaws combine easy accessibility with extra turning strength
&bull Measurement scale on head conveniently shows fastener size (except for 24" and 30" wrenches)
&bull Precision hardened and anti-corrosion treated
Qty:
Qty:
closeout
$194.36 MSRP
$
129.48
Qty:
closeout
$35.02 MSRP
$
23.45
Qty:
Part #:511045
- 10" Adjustable Black Oxide Wrench - Carded
Crescent Adjustable Wrenches feature a large knurl for easy adjustment and a tight jaw fit. Its hex jaw design helps reduce slippage and tightly grips the fastener for solid, secure operation, while the corrosion-resistant black oxide finish helps prevent rusting. A wide handle design provides comfort and reduces fatigue during extended use, ideal for both pros and do-it-yourself enthusiasts.
Qty:
Part #:511047
- 12" Adjustable Black Oxide Wrench - Carded
Crescent Adjustable Wrenches feature a large knurl for easy adjustment and a tight jaw fit. Its hex jaw design helps reduce slippage and tightly grips the fastener for solid, secure operation, while the corrosion-resistant black oxide finish helps prevent rusting. A wide handle design provides comfort and reduces fatigue during extended use, ideal for both pros and do-it-yourself enthusiasts.
Qty:
closeout
Part #:513311
- CLOSEOUTS Only 5 Left!
- Product details (Being Replaced by Marshalltown Trowel CC766)
This Walboard tool 08-001/AC31 Drywall Circle Cutter rips into solid wood, plywood, particle board, chipboard and other heavy-duty materials. The calibrated steel shaft enables you to make slashes that are up to 16" in diameter. This adjustable circle cutter is long lasting and has a heat-treated scoring blade for sharper incisions. The versatile screw knob assures that your construction projects will have precise and clean lines.
Walboard Tool 08-001/AC31 Drywall Circle Cutter
Calibrated steel shaft enables cuts up to 16" in diameter
Adjustable screw knob assures precise, clean cuts
Long-lasting heat-treated scoring blade for sharper cuts
Carded wood circle cutter
$
9.14
Qty:
closeout
$63.50 MSRP
$
44.50
Part #:510927
- CLOSEOUTS Only 4 Left!
- (Discontinued being replaced by RT200SET3-05)
Qty:
closeout
$98.80 MSRP
$
61.35
Part #:503074
- CLOSEOUTS Only 3 Left!
- Heavy Service C-Clamp Capacity 1-7/8" &bull Especially designed for heavy duty service, frames are drop-forged and heat-treated for maximum strength and reduced springing &bull Screws are made of special grade steel and are heat-treated for added strength not found in typical case-hardened screws &bull To tighten, the square headed screw must be turned with a wrench &bull Ideal for the most demanding applications such as construction and heavy industry &bull Square head screw allows tightening with wrench for extra heavy duty clamping requirements &bull Greater anvil surface for gripping larger work pieces and for greater stability
Qty:
closeout
$143.05 MSRP
$
93.35
Part #:810331
- CLOSEOUTS Only 1 Left!
- Adjustable Wrench 15" Chrome (Discontinued being replaced by BAH8074RCUS)
&bull Chrome Finish
&bull 15"
Qty:
Displaying: 1 - 24 of 71 Matching Items