Angle Grinder
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Power Tools: Angle Grinder Cable Stripper Drain Cleaner Drills and Hammer Drills Reciprocating Saw
Part #:507361
- 11 Amp Corded 4-1/2 in. Small Angle Grinder Paddle No-Lock (Replaces discontinued 6140-30)
The 11 Amp 4-1/2 in. Small Angle Grinder (Paddle, Lock-On) delivers up to 3X more durability and up to 50% more power than the competition. With a 1,400 MWO motor that powers through the toughest jobs, the 6141-30 is the perfect match for industrial users. A grip circumference measuring a full 2 in. less than the competition, this Milwaukee grinder provides more control and less fatigue throughout the day. Featuring a 100% tool-free design, this Grinder allows the user to change all accessories, including hubbed product, without a wrench. In addition, the tool-free, burst resistant, adjustable guard allows users to make quick guard installations and adjustments.
Qty:
Part #:288220
- M18 FUEL&trade 4-1/2" / 5" Braking Grinder (Tool Only)
The world's first cordless braking grinder stops accessories in under 2 seconds, delivers the power of a corded grinder, and has up to 10X longer tool life. The M18 FUEL&trade 4-1/2" / 5" Grinder supplies maximum sustained power to complete the toughest grinding, surface preparation and cutting applications. The POWERSTATE&trade Brushless Motor provides up to 10X longer motor life and lower cost of ownership. The M18&trade REDLITHIUM&trade XC5.0 Battery Pack delivers up to 4X more run time and 20% more power. The grinder features REDLINK PLUS&trade Intelligence, the most advanced system of cordless power tool electronics, for maximum performance. A Rapid Stop Brake feature stops accessories in under 2 seconds. The 18-volt lithium-ion grinder&rsquos thin body design gives it optimized balance to rest easily in your hands. Tool-free accessory changes using the FIXTEC nut and guard adjustments mean less downtime during work. The grinder is built with the same tool body, gearing system and anti-vibration side handle as Milwaukee&rsquos legendary high-performance corded grinders for maximum durability on the job. The kit includes 2 M18&trade REDLITHIUM&trade XC5.0 Extended Capacity Battery Packs, a multi-voltage charger and carrying case. Grinding wheel sold separately.
Qty:
Part #:805472
- M18 FUEL&trade SAWZALL® Reciprocating Saw - 2 Battery XC5.0 Kit
Our M18 FUEL&trade SAWZALL® Recip Saw 2 Battery Kit is the next generation of legendary performance and durability, designed for the toughest applications on the job site. The MILWAUKEE® M18 FUEL&trade SAWZALL® is the fastest cutting reciprocating saw in its class and leverages a POWERSTATE&trade Brushless Motor to provide you with 3,000 SPM and a 1-1/4" stroke length for faster material removal. REDLINK&trade PLUS electronics ensure maximum performance under stress as well as protection from overloading, overheating, and over-discharging. The included M18&trade REDLITHIUM&trade XC5.0 Battery Pack delivers you up to 2.5X runtime and provides more work per charge and more work over the life of the pack than competitive batteries. The M18 FUEL&trade SAWZALL® Recip Saw is designed to perform in the most demanding applications and is our most durable cordless reciprocating saw yet. A wear-resistant blade change, anti-corrosion blade clamp, and metal reinforced battery rails provide longer component life and stand up to the toughest jobsite conditions. The M18 FUEL&trade SAWZALL® Recip Saw is lighter weight than the previous generation and features an adjustable shoe, integrated LED light, and a hanging hook for convenient storage on the job.
Qty:
Part #:805470
- M18 FUEL&trade SAWZALL® Recip Saw - 1 Battery XC5.0 Kit
Our M18 FUEL&trade SAWZALL® Recip Saw 1 Battery Kit is the next generation of legendary performance and durability, designed for the toughest applications on the job site. The MILWAUKEE® M18 FUEL&trade SAWZALL® is the fastest cutting reciprocating saw in its class and leverages a POWERSTATE&trade Brushless Motor to provide you with 3,000 SPM and a 1-1/4" stroke length for faster material removal. REDLINK&trade PLUS electronics ensure
Qty:
Part #:729-2882-22
- M18 FUEL&trade 4-1/2" / 5" Braking Grinder w/ ONE-KEY&trade Paddle Switch, No Lock
Our M18 FUEL&trade 4-1/2" / 5" Braking Grinder with ONE-KEY&trade Paddle Switch, No Lock Kit is the next advancement in power and performance of cordless grinders while enhancing safety with its RAPIDSTOP&trade Brake. The M18 FUEL&trade 4-1/2" / 5" Braking Grinder with ONE-KEY&trade generates 11A corded power to complete the toughest grinding and cutting applications. The POWERSTATE&trade Brushless Motor delivers maximum sustained power and 8,500 RPM to remove material faster and increase productivity. REDLINK PLUS&trade Intelligence ensures unmatched levels of performance, protection, and compatibility. The RAPIDSTOP&trade Brake provides stop times under 2 seconds with an abrasive disc. Our M18 FUEL&trade 4-1/2" / 5" Braking Grinder with ONE-KEY&trade includes an electronic clutch for kickback protection, as well as overload protection to maximize motor life. Compatible with ONE-KEY&trade, this grinder wirelessly connects to a smartphone to track and manage the tool, providing you with visibility to where tools are across your network of jobs. The included M18&trade REDLITHIUM&trade HIGH OUTPUT&trade XC6.0 Batteries deliver 50% more power while running 50% cooler than the M18&trade REDLITHIUM&trade XC Batteries. Experience faster accessory changes, and less downtime with tool-free accessory and guard adjustments, while remaining fully compatible with the most common accessories in the market. The MILWAUKEE® M18 FUEL&trade 4-1/2" / 5" Braking Grinder with ONE-KEY&trade is the next level of jobsite productivity and enhanced safety in cordless grinders.
Qty:
Part #:810056
- WEP 15-150 Quick (600488420) Angle Grinder Cardboard box with quick-locking nut
Highest service life for extreme applications robust, powerful angle grinder with greatest power density in its class for quick work progress
Longer service life, more drive the Metabo LongLife Motor with patented dust guard, up to 20% more high overload capacity and 50% more torque
Tacho-Constamatic (TC)-Full Wave Electronics fast work progress by means of constant speed under load
Quick disc change at the push of a button without tools, with the Metabo M-Quick System
Tool-free adjustable guard twist-proof
Low vibration side handleMetabo VibraTech (MVT)
Paddle switch with dead-man function safe to operate due to an ergonomically integrated switch
Metabo S-automatic Torque Limiting Clutch minimises kick-back to the lowest level when the disc jams unexpectedly - for maximum user protection and swift progress
Electronic overload protection, soft start and restart protection
Gear housing can be mounted turned in 90° steps for left-handed operation or cutting
Auto-stop carbon brushes to protect the motor
$
367.77
Qty:
Part #:262120
- M18&trade SAWZALL® Reciprocating Saw (Tool Only)
The M18&trade SAWZALL® Reciprocating Saw delivers unmatched durability, speed, and run-time. The all metal gearing and REDLINK&trade Intellgence provide ultimate performance and protection against jobsite conditions. The M18&trade SAWZALL® Reciprocating Saw provides up to 30% faster cutting and 50% more run-time in key applications versus leading competitors. The slim front end design provides improved ergonomics, offering maximum comfort and control.
Qty:
Part #:500250
-
TE 2 Rotary hammer Rotary hammer perf pkg TE 2 #3497789
Compact dual-mode, pistol-grip SDS Plus (TE-C) rotary hammer &ndash for hammer drilling and rotary-only drilling
Weight according EPTA-Procedure 01/20036 lb.
Working modeHammer drilling, Drilling
Hammer drilling diameter range5/32 - 7/8 in
Kit Contains
TE 2 120V Rotary Hammer
TE 2 Tool Case
Chuck Grease
Hammer Drill Bit TE-CX 3/8"x6"
Hammer Drill Bit TE-CX 1/4"x6"
Hammer Drill Bit TE-CX 3/16"x6"
Weight according EPTA-Procedure 01/20036 lb.Working modeHammer drilling, DrillingHammer drilling diameter range5/32 - 7/8 inOptimum Hammer drilling range5/32 - 15/32 inSingle impact energy1.3 ft-lbsHammer drilling RPM1200 rpmFull hammering frequency4600 impacts/minuteFunctionalityReverse mode, Depth gaugeTriaxial vibration value for hammer drilling into concrete (ah,HD)13.5 m/s² 1 A-weighted emission sound pressure level91 dB (A) 2 Dimensions (LxWxH)13.9 x 3.5 x 8 mm
$
417.59
Qty:
Part #:729-6117-33D
- 13 Amp 5" Small Angle Grinder Slide, Lock-On
The 13 Amp 5" Small Angle Grinder (Slide, Lock-On) delivers up to 30% more durability and power than the competition. With a 2,100 MWO motor that powers through the toughest jobs, the 6117-33 is the perfect match for industrial users. Milwaukee's Electronic Advantage includes Overload Protection to maximize motor life, an Electronic Clutch that extends tool life and helps prevent bind-up, Line Lock-Out that prevents automatic start-up after power loss, and Soft Start. Constant Power Technology® enables the grinder to maintain speed under load for unmatched performance and productivity. Featuring a 100% tool-free design, this Grinder allows the user to change all accessories, including hubbed product, without a wrench. In addition, the tool-free, burst resistant, adjustable guard allows users to make quick guard installations and adjustments.
Qty:
Part #:729-2785-20
- M18 FUEL&trade 7" / 9" Large Angle Grinder (Tool Only)
The M18 FUEL&trade 7" / 9" Large Angle Grinder is the world's first 18v LAG. It generates 15A corded power is up to 2 lbs lighter, and has 9" grinding capacity. Providing high performance, advanced ergonomics & legendary durability, this grinder is designed to complete the toughest grinding, surface preparation, and cutting applications with any 7" - 9" accessory. The POWERSTATE&trade Brushless Motor provides 6,600 RPM and higher speeds under load for corded grinding/cutting performance. REDLINK PLUS&trade intelligence ensures maximum performance and protection from overload, overheating and over discharge. The M18 REDLITHIUM HIGH OUTPUT HD12.0 battery delivers unmatched run-time in all applications. Tool-free accessory changes using the FIXTEC nut and guard adjustments mean less downtime during work
Qty:
$
235.86
Qty:
Part #:834-606479420
- WEPB 24-230 MVT (606479420) Angle Grinder Cardboard box with mechanical disc brake
Metabo Long-life motor with patented dust protection for long service life
Highest user safety with mechanical disc brake and deadman switch disc stops in 2.5 seconds after release, even during a power failure
Electronic safety shutdown of the motor reduces kickback if the disc stops unexpectedly- for high user protection
Rotating main handle and side handle can be mounted in 3 positions for optimal handle position, even while cutting
Tool-free adjustable guard twist-proof
Starting Current Limitation with Soft Start prevents fuse being tripped upon start
Electronic overload protection and restart protection
Metabo VibraTech (MVT) integrated damping system and side handle to reduce vibration in order to protect the user.
Metabo safety switch prevents unintentional start
Auto-stop carbon brushes to protect the motor
LED signal on triggered restart protection or overheating
$
498.40
Qty:
Part #:834-606478420
- WEPB 24-180 MVT (606478420) Angle Grinder Cardboard box with mechanical disc brake
Metabo Long-life motor with patented dust protection for long service life
Highest user safety with mechanical disc brake and deadman switch disc stops in 2.5 seconds after release, even during a power failure
Electronic safety shutdown of the motor reduces kickback if the disc stops unexpectedly- for high user protection
Rotating main handle and side handle can be mounted in 3 positions for optimal handle position, even while cutting
Tool-free adjustable guard twist-proof
Starting Current Limitation with Soft Start prevents fuse being tripped upon start
Electronic overload protection and restart protection
Metabo VibraTech (MVT) integrated damping system and side handle to reduce vibration in order to protect the user.
Metabo safety switch prevents unintentional start
Auto-stop carbon brushes to protect the motor
LED signal on triggered restart protection or overheating
$
498.40
Qty:
Part #:729-6088-30
- AX Item Number 608830. Country of Origin CHN. Harmonized Tariff 8467290010:
Qty:
Part #:288020
- AX Item Number 288020. Country of Origin VNM. Harmonized Tariff 8467290010:
Qty:
Part #:729-6117-30
- Country of Origin CHN:
Qty:
Part #:729-2722-21HD
- Country of Origin CHN:
Qty:
Part #:729-2680-22
- M18&trade Cordless LITHIUM-ION 4-1/2" Cut-off / Grinder Kit (Discontinued, Replaced by 2680-20)
The M18® Cordless LITHIUM-ION 4-1/2" Cut-off / Grinder provides speed, durability and ease-of-use to the industrial user. Built with a Milwaukee® 4-pole motor, the 2680-22 delivers maximum power when cutting or grinding. The 2680-22 is the only cordless cut-off / grinder in the market to provide the user-preferred paddle switch for comfort and ease-of use when operating in various positions. L-shape intake vents protect the cut-off / grinder by keeping harmful debris from entering the tool and damaging internal components.
Qty:
Part #:729-6519-30
- Sawzall® Recip Saw (Discontinued, Replaced by 6519-31)
The 6519-30 Sawzall® Recip Saw delivers best in class cut speed, durability and power with 0-3,000 strokes per minute, a 1-1/8&rdquo stroke length and a 12 Amp motor. The gear protecting clutch extends gear and motor life by absorbing high impact forces and a QUIK-LOK® blade clamp offers fast tool-free blade changes. To provide greater user comfort, a counter weighted mechanism reduces vibration for smoother operation and a redesigned front grip area provides best in class ergonomics.
Qty:
Part #:729-6124-31
- 13 Amp 5" Small Angle Grinder Trigger Grip, No-Lock (Replaces 6121-31)
The 13 Amp 5" Small Angle Grinder (Trigger Grip, No-Lock) delivers up to 30% more durability and power than the competition. With a 2,100 MWO motor that powers through the toughest jobs, the 6124-31 is the perfect match for industrial users. Milwaukee's Electronic Advantage includes Overload Protection to maximize motor life, an Electronic Clutch that extends tool life and helps prevent bind-up, Line Lock-Out that prevents automatic start-up after power loss, and Soft Start. Constant Power Technology® enables the grinder to maintain speed under load for unmatched performance and productivity. Featuring a 100% tool-free design, this Grinder allows the user to change all accessories, including hubbed product, without a wrench. In addition, the tool-free, burst resistant, adjustable guard allows users to make quick guard installations and adjustments.
Share This
Qty:
Part #:729-6124-30
- Business Unit Tools. Product Level 1 Tools Corded. Product Level 2 Tools Metal Working. Product Level 3 TOL Grinders. Product Level 4 TOL SAGs. AX Item Number 612430. Country of Origin CHN. Harmonized Tariff 8467290010.:
Qty:
Part #:503778
- 13 Amp 6" Small Angle Grinder Paddle, No-Lock
The 13 Amp 6" Small Angle Grinder (Paddle, Lock-On) delivers up to 30% more durability and power than the competition. With a 2,100 MWO motor that powers through the toughest jobs, the 6161-30 is the perfect match for industrial users. Milwaukee's Electronic Advantage includes Overload Protection to maximize motor life, an Electronic Clutch that extends tool life and helps prevent bind-up, Line Lock-Out that prevents automatic start-up after power loss, and Soft Start. Constant Power Technology® enables the grinder to maintain speed under load for unmatched performance and productivity. Featuring a 100% tool-free design, this Grinder allows the user to change all accessories, including hubbed product, without a wrench. In addition, the tool-free, burst resistant, adjustable guard allows users to make quick guard installations and adjustments.
Qty:
Part #:729-6142-31
- 11 Amp Corded 4-1/2 in. Small Angle Grinder Paddle No-lock
The 11 Amp 4-1/2 in. Small Angle Grinder (Paddle, No-Lock) delivers up to 3X more durability and up to 50% more power than the competition. With a 1,400 MWO motor that powers through the toughest jobs, the 6142-31 is the perfect match for industrial users. A grip circumference measuring a full 2 in. less than the competition, this Milwaukee grinder provides more control and less fatigue throughout the day. Milwaukee's Electronic Advantage includes Overload Protection to maximize motor life, an Electronic Clutch that extends tool life and helps prevent bind-up, Line Lock-Out that prevents automatic start-up after power lossand Soft Start. Featuring a 100% tool-free design, this Grinder allows the user to change all accessories, including hubbed product, without a wrench. In addition, the tool-free, burst resistant, adjustable guard allows users to make quick guard installations and adjustments.
Qty:
Part #:729-2822-20
- M18 FUEL&trade SAWZALL® Recip Saw w/ ONE-KEY&trade (Tool-Only)'
Our M18 FUEL&trade SAWZALL® Recip Saw is the next generation of legendary performance and durability, designed for the toughest jobsite applications. The M18 FUEL&trade SAWZALL® is the fastest cutting reciprocating saw in its class and leverages a POWERSTATE&trade Brushless Motor to provide you with 3,000 SPM and a 1-1/4" stroke length for faster material removal. REDLINK&trade PLUS electronics ensure maximum performance under stress in addition to protection from overloading, overheating, and over-discharging. The M18&trade REDLITHIUM&trade XC5.0 Battery Pack (not included) delivers you up to 2.5X runtime and provides more work per charge and more work over the life of the pack than competitive batteries. This MILWAUKEE® M18 FUEL&trade SAWZALL® is designed to perform in the most demanding applications and is our most durable cordless reciprocating saw yet. A wear-resistant blade change, anti-corrosion blade clamp, and metal reinforced battery rails provide longer component life and stand up to the toughest jobsite conditions. The M18 FUEL&trade SAWZALL® Recip Saw weighs less than the previous generation and features an adjustable shoe, integrated LED light, and a hanging hook for convenient storage on the job. Compatible with ONE-KEY&trade, this reciprocating saw wirelessly connects to a smartphone to customize, track, and manage the tool&rsquos performance and location. Tool customization allows you to connect and control settings such as output speed and trigger ramp up for smoother cut starts. A selectable Cut-Brake feature automatically stops the blade from reciprocating at the end of a cut, reducing the risk of damaging sensitive materials near the cut in most applications. The tool&rsquos memory supports up to 3 custom profiles that can be easily accessed with the touch of a button on the tool. Integrated tool tracking, also available through ONE-KEY&trade, provides you with full visibility to how and where tools are being used across your network of jobs and users.
Qty:
Displaying: 1 - 24 of 38 Matching Items