Baldor
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Brand: Baldor General Tool Klein Parker
Part #:306147
- 1/4-Inch Cabinet Tip Insulated Screwdriver, 4-Inch
1000V rated for safety
Durable, flame-retardant, molded dual-layer insulation
Custom US-made tool steel
Cushion-Grip&trade handle for superior torque and comfort
Made in the USA
Protect yourself when working near an energized source. Clearly marked with the official 1000-volt rating symbol, Klein insulated tools exceed IEC 60900 and ASTM F1505 standards for insulated tools. Two layers of insulation provide protection against electric shock. Built to handle the tough jobs with ease.
Qty:
Part #:306161
- Insulated Screwdriver, #2 Phillips Tip, 4-Inch
1000V rated for safety
Durable, two-layer, molded insulation to meet or exceed all ASTM and IEC standards for insulated tools
Cushion-Grip&trade handles for greater torque and comfort
Custom US-made steel
Made in USA
The Klein Tools #2 Insulated Phillips Head Screwdriver provides safe electrical insulation up to 1,000-Volt. This screwdriver features 2 layers of insulation around a steel construction to ensure dielectric protection and impact resistance. Cushion-Grip&trade handle ensures excellent torque and comfort.
Qty:
Part #:502753
- The #300/1 Industrial Precision 6 In. Flexible Steel Rule can make very precise measurements.
Features
Ultra-fine black graduations
Polished stainless steel finish
Pocket clip
Includes
Plastic sleeve
Dimensions
6 x 3-7/8 in.
Qty:
Part #:800387
- Five-blade Screwdriver Set
The #S605 Five-blade Screwdriver Set includes slotted and crosspoint blades.
Qty:
Part #:510965
- Tungsten Carbide Point Scriber/Etching Pen with MagnetThe #88CM Tungsten Carbide Point Scriber/Etching Pen with Magnet can mark and scribe steel, ceramic and glass. The magnet can retrieve small ferrous and steel parts and chips from hard-to-reach places.
Point diameter 1/16 in. (1.6mm)
Qty:
Part #:306066
- Terminal Block Screwdriver, 1/8-Inch Cabinet, TB-DIN
Precision machined tip provides exact fit for terminal block screws
1/8-Inch (3.2 mm) cabinet tip is up to 19-Percent stronger than competitors
Tip provides 76-Percent higher torque value than the required ASME B107 Standard
Cushion-Grip&trade handle offers greater torque comfort
Made in USA
Qty:
Part #:503812
- L Style Ball End Hex Key Caddy Set 12-Piece
&bull L-style hex keys in convenient caddy sets&bull Includes 12 sizes .050-Inch, 1/16-Inch, 5/64-Inch, 3/32-Inch, 7/64-Inch, 1/8-Inch, 9/64-Inch, 5/32-Inch, 3/16-Inch, 7/32-Inch, 1/4-Inch and 5/16-Inch&bull Each set contains a unique locking feature and marked slots for each key&bull Ball end works on angles up to 25-degrees&bull Durable caddy keeps hex keys organized&bull Top-grade alloy steel&bull Heat-treated and tempered for added strength and durability&bull Rust and corrosion resistance surfaces&bull Extra length for hard-to-reach applications
Qty:
Part #:500190
- 3 Blade Pocket Knife with Screwdriver
Curved-sheepfoot skinning blade to 2-3/8-Inch (60 mm) long
Standard spearpoint blade to 2-1/2-Inch (64 mm) long
Screwdriver-tip blade to 2-1/2-Inch (64 mm) long
Screwdriver blade locks open
Plastic with faux wood grain handle
Compact 3.75-Inch (95.3 mm) closed
Blades are constructed from durable carbon steel
This Klein Tools Pocket Knife has 3 blades. With a 2-3/8-Inch curved sheepfoot skinning blade, a 2-1/2-Inch spearpoint blade and a screwdriver tip blade that can lock open, you'll want to be sure to have this with you on the jobsite. Blades are constructed from durable carbon steel.
Qty:
Part #:500425
- 4 Pocket Tool Pouch 6-1/2-Inch x 8-1/2-Inch
Four pockets for easy access to a variety of tools
Includes knife snap
Riveted leather construction for long life
Slotted to fit belts up to 2-Inches (51 mm) wide
Assembled in the USA of U.S. and imported components
Qty:
Part #:505594
- Flashlight Holder
&bull Holds a standard flashlight that takes 2 D-cell batteries&bull Slotted to fit belts up to 2-1/4-Inches (57 mm)&bull Riveted leather construction for long life&bull Assembled in USA of U.S. and imported components
Qty:
Part #:506473
- Utility Pouch, 3-Pocket, Leather
&bull Stitched and riveted leather construction for long life&bull Features 1-Inch (25 mm) reinforced gusset&bull Has a large utility pocket plus two outside pockets&bull Tunnel loop fits belts up to 1-Inch (25 mm) wide
Qty:
Part #:800592
- 8-Pocket Tool Pouch Slotted
&bull Has four large utility pockets, two pliers pockets and two screwdriver pockets&bull Stitched and riveted leather construction for long life&bull Includes a knife snap&bull Slotted to fit belts up to 2-Inch (51 mm) wide
Qty:
Part #:501520
- Tool Pouch, Tunnel Loop, 8 Pockets
Features four large utility pockets, two pliers pockets and two screwdriver pockets
Stitched and riveted leather construction for long life
Tunnel loop fits belts up to 2-1/2-Inch (64 mm) wide
Includes a knife snap
Qty:
Part #:506857
- Knife Holder
&bull Stitched and riveted leather construction for long life&bull Designed for utility knives including Klein Cat. Nos. 44100 and 44105&bull Slotted to fit belts up to 2-1/2-Inches (64 mm) wide&bull Assembled in the USA of U.S. and imported components
Qty:
Part #:809846
- 10-Pocket Tool Pouch
&bull Ten separate compartments with places for a wide variety of pliers, screwdrivers and other tools&bull Stitched and riveted leather construction for long life&bull Includes ring and slotted-leather tape thong&bull Slotted to fit belts up to 1-3/4-Inches (44 mm) wide
Qty:
Part #:500970
- Lightweight Tool Belt
Designed to carry lightweight tunnel or slotted tool pouches and holders
Fits waist sizes 33-Inches to 44-Inches (838 mm to 1143 mm)
Leather construction for durability and comfort
Belt is 1-Inch (25 mm) wide
Assembled in USA of U.S. and imported components
Qty:
Part #:501522
- General-Purpose Belt, Large
&bull Made of strong, heavy-duty leather&bull Removable single-tongue buckle held is by two heavy-duty snaps&bull Belt is 1-1/2-Inch (38 mm) wide&bull Waist size 38- to 46-Inch
Qty:
Part #:503872
- General-Purpose Belt, X-Large
&bull Made of strong, heavy-duty leather&bull Removable single-tongue buckle held is by two heavy-duty snaps&bull Belt is 1-1/2-Inch (38 mm) wide&bull Waist size 38- to 46-Inch
Qty:
Part #:806735
- Electrician's Leather Tool Belt, Large
&bull Made of strong, heavy-duty leather&bull Includes tool loops and chain-tape thong&bull Large fits sizes 38-Inches to 46-Inches (965 mm to 1168 mm)&bull Belt is 1-1/2-Inches (38 mm) wide
Qty:
Part #:507527
- Electricians Leather Tool Belt, X-Large
&bull Made of strong, heavy-duty leather&bull Includes tool loops and chain-tape thong&bull Extra Large Fits sizes 46-Inches to 54-Inches (1168 mm to 1372 mm)&bull Belt is 1-1/2-Inches (38 mm) wide
Qty:
Part #:501521
- Adjustable PolyWeb Tool Belt
&bull Fits waist sizes up to 48-Inches (1219 mm)&bull Accommodates tunnel loop and slotted tool pouches and holders&bull 2-Inch (51 mm) wide polypropylene webbing&bull Rugged metal buckle for quick release and easy adjustment&bull Corrosion resistance hardware
Qty:
Part #:500973
- Heavy Duty Embossed Tool Belt, X-Large
Strong, heavy-duty leather
Equipped with a double-tongue buckle
Keeps tool pouches and holders together
Fits waist size 44-Inch to 52-Inch (111.8 to 132.1 cm)
Qty:
closeout
$55.08 MSRP
$
41.30
Part #:510380
- CLOSEOUTS Only 1 Left!
- Lineman's Pliers, 8-Inch
&bull Sure-gripping, cross-hatched knurled jaws&bull Induction hardened cutting knives for long life&bull Hot-riveted joint ensures smooth action and no handle wobble&bull Unique handle tempering helps absorb the ''snap'' when cutting wire&bull Precision-hardened plier head for on-the-job toughness&bull Plastic-dipped handles for comfort and ease of identification&bull ''Handform'' handles for full gripping and cutting power&bull Custom, US-made tool steel
Qty:
Part #:507877
- Lineman's Square Nose Pliers, 9-Inch
&bull High-leverage design. Rivet is closer to the cutting edge for 46-percent greater cutting and gripping power than other plier designs&bull Hot-riveted joint ensures smooth action and no handle wobble&bull Induction hardened cutting knives for long life&bull Streamlined design with sure-gripping, cross-hatched knurled jaws&bull Unique handle tempering helps absorb the ''snap'' when cutting wire&bull Precision-hardened plier head for on-the-job toughness&bull Plastic-dipped handles for comfort and ease of identification&bull ''Handform'' handles for full gripping and cutting power&bull Custom, US-made tool steel
Qty:
Displaying: 25 - 48 of 110 Matching Items