Bandsaw
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Power Tools: Bandsaw Beveling Tool Hammer Drill Hoist Site Light
closeout
$520.00 MSRP
$
341.70
Part #:505377
- CLOSEOUTS Only 1 Left!
- Portable Band Saw
Milwaukee's Band Saws are the choice of professionals. With high torque and powerful motor this band saw will maintain a steady, optimum blade speed. The excellent balance, high visibility and quick blade change system make this band saw easy to work with. Using an all ball and roller bearing construction, and worm gear and chain drive mechanism this tool is built to last. A self-lubricating system is used for maximum wear resistance and long life. No oiling is needed.
Qty:
Part #:729-2145-20
- M18&trade RADIUS&trade Compact Site Light
MOST VERSATILE LIGHT ON SITE - The M18&trade RADIUS&trade Compact Site Light is the World&rsquos first high output cordless site light on the market, and has the ability to provide light in task, area, and overhead applications. With 4,400 lumens of TRUEVIEW&trade High Definition output, the M18&trade Radius&trade LED Compact Site Light provides enough light to illuminate large work areas, and can be turned down to as low as 1,000 lumens for working in confined areas. A high impact polycarbonate lens, and IP54 ingress protection allows it to live in the toughest conditions. The combination of these technologies offers professionals the highest quality LED lighting solution, on or off the jobsite.
Qty:
Part #:500250
-
TE 2 Rotary hammer Rotary hammer perf pkg TE 2 #3497789
Compact dual-mode, pistol-grip SDS Plus (TE-C) rotary hammer &ndash for hammer drilling and rotary-only drilling
Weight according EPTA-Procedure 01/20036 lb.
Working modeHammer drilling, Drilling
Hammer drilling diameter range5/32 - 7/8 in
Kit Contains
TE 2 120V Rotary Hammer
TE 2 Tool Case
Chuck Grease
Hammer Drill Bit TE-CX 3/8"x6"
Hammer Drill Bit TE-CX 1/4"x6"
Hammer Drill Bit TE-CX 3/16"x6"
Weight according EPTA-Procedure 01/20036 lb.Working modeHammer drilling, DrillingHammer drilling diameter range5/32 - 7/8 inOptimum Hammer drilling range5/32 - 15/32 inSingle impact energy1.3 ft-lbsHammer drilling RPM1200 rpmFull hammering frequency4600 impacts/minuteFunctionalityReverse mode, Depth gaugeTriaxial vibration value for hammer drilling into concrete (ah,HD)13.5 m/s² 1 A-weighted emission sound pressure level91 dB (A) 2 Dimensions (LxWxH)13.9 x 3.5 x 8 mm
$
397.70
Qty:
Part #:729-2729-20
- M18 FUEL&trade Deep Cut Band Saw (Tool Only)
The M18 FUEL&trade Band Saw cuts faster than its corded counterparts, provides the same legendary durability of a Milwaukee corded band saw and delivers up to 2X more run time than other cordless options. Utilizing a POWERSTATE&trade Brushless motor and Constant Power Technology&trade, the M18 FUEL&trade Deep Cut Band Saw cuts faster than corded band saws. It also delivers the same legendary durability that has made Milwaukee Corded Deep Cut Band Saws second to none for decades by utilizing over 90% of the same parts. Equipped with Jobsite Armor Technology&trade, the tool is better protected from drops and debris with a proprietary composite material and crush zone barriers to absorb impacts. REDLITHIUM&trade XC5.0 Battery Technology provides up to 2.5X more run-time through superior pack construction, electronics, and more work per charge over the life of the battery than any competitive lithium-ion battery on the market. REDLINK PLUS&trade Intelligence has the most advanced system of cordless power tool electronics, providing optimized performance, electronic clutch, and overload protection using total system communication between tool, battery and charger.The M18 FUEL&trade Deep Cut Band Saw features a tool-free locking adjustable shoe that can adjust from an extended shoe to no shoe in seconds. Other innovative features include a hang hook for easy storage in-between cuts, LED light to illuminate the cutting area, superior cut visibility, and a balanced body design that allows the tool to rest naturally and comfortably in the user&rsquos hands.
Qty:
Part #:834-601751750
- KFM 9-3 RF (601751750) Metal Bevelling Tool metaBOX 215
Compact metal beveling tool for 45° chamfers and radii of 2 to 3 mm at visible edges
Surfaces free from oxide and burrs as ideal preparation for the application of powder or paint coatings for maximum protection from corrosion
One-touch controller Patented, tool-free setting of the cutting depth in 0.1" steps stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working
Slim cutter head with standard carbide indexable inserts and ball-bearing stationary seal ring for working in tubes and in curves
Guide stop for uniform finish and high surface quality when finishing straight edges
Bail handle adjusts without tools for secure, even guiding
Metabo Long-life motor with patented dust protection for long service life
Vario-Constamatic (VC)-Full wave electronics with thumbwheel for working with materials requiring customized speeds, which remain almost constant under load
Electronic safety shutdown of the motor for safe working in case the tool stops unexpectedly
Electronic overload protection, soft start and restart protection
Slim housing for ideal handling
With metaBOX, the smart solution for transportation and storage
Qty:
Qty:
Part #:729-5378-20
- 1/2 in. Pistol Grip Dual Torque Hammer Drill, 0-1350/0-2500 RPM (Discontinued, Replaced by 5376-20)
The power to drill ½&rdquo holes in concrete. The versatility to excel at wood and steel applications. This powerful 7.5-amp, ½&rdquo Hammer Drill features dual trigger speed control in two ranges, with more power for the toughest applications or more speed and less torque for lighter applications. Use it for drilling in wood with flat boring bits, hole saws, auger bits and Selfeed bits, or in steel with twist bits and in concrete with percussion bits. The removable side handle helps set the depth rod for pre-set hole drilling. The heavy-duty metal gear case withstands daily jobsite use, yet the drill&rsquos lightweight, balanced pistol-grip design reduces fatigue during a long work day.
Qty:
Part #:729-9565
- 1 Ton Electric Chain Hoist
All Milwaukee Professional Electric Chain Hoists offer an array of load lift and height options. With 1/2 to 2 Ton capacities and 10 ft. to 20 ft. lifting heights, you can order a Milwaukee Electric Chain Hoist to meet your roughest needs. All offer a multi-disc magnetic brake for positive load holding and spotting. Adjustable upper and lower limit switches, overload limiting clutch and latch-type ridged top hook. You can get single or three-phase voltage motors to meet your operation power requirements. The 24-volt pushbutton station fits easily in your hand to allow thumb, trigger or two-handed operation.
Qty:
Part #:729-5376-20
- Business Unit Tools. Product Level 1 Tools Corded. Product Level 2 Tools Drilling & Driving. Product Level 3 TOL Hammer Drills. Product Level 5 TOL Blank. AX Item Number 537620. Country of Origin CHN. Harmonized Tariff 8467210070.:
Qty:
Qty:
Part #:729-2902-20
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Drilling & Driving. Product Level 3 TOL Hammer Drills. Product Level 4 TOL Blank. Product Level 5 TOL Blank. AX Item Number 290220. Country of Origin MEX. Harmonized Tariff 8467210070.:
Qty:
Part #:729-2529-20
- Business Unit Tools. Product Level 1 Tools M12. Product Level 2 Tools Metal Working. Product Level 3 TOL Band Saws. Product Level 4 TOL FUEL. Product Level 5 TOL FUEL. AX Item Number 252920. Country of Origin CHN. Harmonized Tariff 8467220090.:
Qty:
Displaying: 1 - 12 of 12 Matching Items