Battery
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Power Tools: Battery Beveling Tool Charger Circular Saw Mag Drill Multi-Tool NiCd Battery Power Inverter Rotary Tool
Part #:510513
- M18&trade & M12&trade Multi-Voltage Charger
Always be ready for your next job with this cross-system charger. The M18&trade & M12&trade Multi-Voltage Charger accepts all M18&trade and M12&trade batteries, so you&rsquoll always be prepared and productive, especially on jobs that require a mix of M12 and M18 Milwaukee cordless power tools. This versatile unit charges batteries sequentially, reducing your time to manage charge cycles. The charger communicates directly with the battery pack to monitor cell voltage, temperature and charge status to ensure a full charge. Power up your Milwaukee compact batteries in 30 minutes and extended capacity batteries in 60 minutes, without the need for extra chargers on the jobsite.
Qty:
Part #:522042
- M18&trade Six Pack Sequential Charger
The M18&trade Six Pack Sequential Charger offers a compact design, integrated hang holes for vertical mounting, and a pass through plug to conserve outlet space. The new unit will charge M18&trade compact batteries in 30 minutes and extended capacity (XC) batteries in 60 minutes. With this new six pack charger, users can reduce the amount of time spent changing out batteries, increasing productivity on the jobsite.
Qty:
Part #:503244
- TILT-LOK&trade 7-1/4" Circular Saw.
The TILT-LOK&trade handle on Milwaukee's 6390-20 is the most revolutionary concept for circular saws in years. The eight position cushioned top handle adjusts to any cutting application maximizing comfort and control. Weighing in at 10.4 pounds and delivering 3.25 maximum horsepower, this tool offers the best power to weight ratio in the industry. The blade can bevel to 50 degrees and offers superior visibility and a clear sight line from either side. Helical steel gears and a 22 amp switch are just two of the features that ensure the Milwaukee's reputation for durability.
Qty:
closeout
$309.00 MSRP
$
219.75
Part #:514777
- CLOSEOUTS Only 1 Left!
- M12&trade Cordless LITHIUM-ION Multi-Tool Kit (Discontinued, Being Replaced by Tool Only 2426-20)
The Milwaukee® M12&trade Cordless LITHIUM-ION Multi-Tool Kit offers versatility, power and control to complete problematic jobsite applications. Ideal for remodelers, flooring contractors, maintenance repair technicians and electricians, the cordless Multi-Tool cuts, grinds, sands and scrapes at odd angles and in areas difficult to work. It&rsquos powered by the M12&trade REDLITHIUM Battery to deliver up to 25% more runtime than the competition. Use it to make flush or plunge cuts, remove grout, sand and tackle other awkward jobs. The M12 Multi-Tool operates from 5,000 to 20,000 OPM and allows users to match the speed to the application. The all-metal gear case provides high durability, while the over-molded, ergonomic handle offers extra control. With the universal adapter (included), the Multi-Tool is compatible with most competitor accessories for even greater versatility. The kit includes 2 M12 REDLITHIUM battery packs and a charger, 5 assorted sanding sheets, sanding pad, wood cutting blade and contractor bag.
Qty:
closeout
$126.00 MSRP
$
90.00
Part #:505751
- CLOSEOUTS Only 1 Left!
- 14.4V Battery
Choose the best power source for all of your 14.4-Volt Milwaukee cordless tools. With 2.4 amp-hour capacity, the 14.4-volt battery provides power for longer runtimes, so you have less interruption on the job. There&rsquos no memory effect, so the full NiCd battery capacity is always available. The reversible battery pack lets you work in tight spaces, and adjust the balance of the tools for greater comfort and productivity. Use this battery for longlasting, dependable performance with all of your Milwaukee 14.4-volt cordless tools.
Qty:
Part #:729-48-59-2819
- 28-Volt Charger
Power up V28&trade and M28&trade Lithium-Ion batteries in less than one hour. Milwaukee's 28-Volt Charger quickly charges V28 and M28 Lithium-Ion batteries for less downtime on the job. The high-visibility LED light displays the charge status from across the room so you can monitor recharges without interrupting your work. The unit&rsquos pass-through plug conserves valuable outlet space. Get single-charger simplicity when working with all of your V28 and M28 cordless power tools.
Qty:
closeout
$
69.00
Qty:
closeout
$
118.00
Qty:
Part #:263020
- M18&trade 6 ½" Circular Saw (Tool Only)
Qty:
Part #:514778
- M18&trade Cordless Multi-Tool (Tool Only)
The Milwaukee® M18&trade Cordless Multi-Tool cuts up to 50% faster and delivers up to 2X more cuts per charge than the competitors. With best-in-class speed and performance, the cordless Multi-Tool offers the versatility to complete problematic jobsite applications. Ideal for remodelers, flooring contractors, maintenance repair technicians and electricians, the cordless Multi-Tool cuts, grinds, sands and scrapes at odd angles and in areas difficult to
Qty:
Part #:834-601751750
- KFM 9-3 RF (601751750) Metal Bevelling Tool metaBOX 215
Compact metal beveling tool for 45° chamfers and radii of 2 to 3 mm at visible edges
Surfaces free from oxide and burrs as ideal preparation for the application of powder or paint coatings for maximum protection from corrosion
One-touch controller Patented, tool-free setting of the cutting depth in 0.1" steps stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working
Slim cutter head with standard carbide indexable inserts and ball-bearing stationary seal ring for working in tubes and in curves
Guide stop for uniform finish and high surface quality when finishing straight edges
Bail handle adjusts without tools for secure, even guiding
Metabo Long-life motor with patented dust protection for long service life
Vario-Constamatic (VC)-Full wave electronics with thumbwheel for working with materials requiring customized speeds, which remain almost constant under load
Electronic safety shutdown of the motor for safe working in case the tool stops unexpectedly
Electronic overload protection, soft start and restart protection
Slim housing for ideal handling
With metaBOX, the smart solution for transportation and storage
$
1,529.98
Qty:
Part #:729-2834-20
- M18 FUEL&trade 7-1/4&rdquo Circular Saw (Tool Only)
Our M18 FUEL&trade 7-1/4&rdquo Circular Sawis designedfor the professional carpenter, remodelers, and general contractors who rely on high-performing and durable tools. Leveraging the latestincordless technology, this saw offers class-leading performance, providing the power to complete more demanding applications and the cut speed to achieve greater productivity. The POWERSTATE&trade Brushless Motor delivers 6,000 RPM, maintaining high speed under load,providing users the abilityto complete their most demanding applications efficiently. The latestinREDLINK PLUS&trade Electronics ensures maximum tool performance and protection from overload, overheating, and over-discharge. When paired with an M18 REDLITHIUM&trade FORGE&trade HD12.0Batterythissaw delivers750 cuts per charge and is fully compatible with all M18 REDLITHIUM&trade batteries.The ergonomic, compact, and lightweight design makes the sawaperfectsolutionfor all-day cutting.Positive bevel detents and depth detents offer added productivity and reduce downtime. Additionally, the saw has an electric blade brake, LED work light, rafter hook, and all magnesium guards and shoes, keeping the user productive and providing the durability to handle thetoughestjob site conditions.
$
264.00
Qty:
Qty:
Qty:
Qty:
Qty:
Part #:729-2730-20
- Country of Origin CHN:
Qty:
Part #:729-48-11-2401
- Business Unit Tools. Product Level 1 Tools M12. Product Level 2 Tools Batteries. Product Level 3 TOL 1.5 AHr Battery. Product Level 4 TOL RL Single. Product Level 5 . AX Item Number 48112401. Country of Origin MYS. Harmonized Tariff 8507600020.:
Qty:
Part #:729-48-59-1807
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Batteries. Product Level 3 TOL Chargers. Product Level 4 TOL Chargers. AX Item Number 48591807. Country of Origin VNM. Harmonized Tariff 8504409550.:
Qty:
Part #:729-4274-21
- Business Unit Tools. Product Level 1 Tools Corded. Product Level 2 Tools Metal Working. Product Level 3 TOL Mag Drills. Product Level 4 TOL Blank. Product Level 5 . AX Item Number 427421. Country of Origin CHN. Harmonized Tariff 8467210010.:
Qty:
Part #:729-2787-22HD
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Metal Working. Product Level 3 TOL Mag Drills. Product Level 4 TOL Blank. Product Level 5 TOL FUEL. AX Item Number 278722HD. Country of Origin CHN. Harmonized Tariff 8467210010.:
Qty:
Part #:729-2782-20
- Country of Origin CHN:
Qty:
Part #:729-48-59-1810
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Batteries. Product Level 3 TOL Chargers. Product Level 4 TOL Chargers. AX Item Number 48591810. Country of Origin VNM. Harmonized Tariff 8504409550.:
Qty:
Qty:
Displaying: 1 - 24 of 32 Matching Items