Battery
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Power Tools: Battery Beveling Tool Concrete Vibrator Hoist Impact Driver Inflator Jig Saw Router Sliding Compound Miter Saw Transfer Pump
Part #:834-601751750
- KFM 9-3 RF (601751750) Metal Bevelling Tool metaBOX 215
Compact metal beveling tool for 45° chamfers and radii of 2 to 3 mm at visible edges
Surfaces free from oxide and burrs as ideal preparation for the application of powder or paint coatings for maximum protection from corrosion
One-touch controller Patented, tool-free setting of the cutting depth in 0.1" steps stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working
Slim cutter head with standard carbide indexable inserts and ball-bearing stationary seal ring for working in tubes and in curves
Guide stop for uniform finish and high surface quality when finishing straight edges
Bail handle adjusts without tools for secure, even guiding
Metabo Long-life motor with patented dust protection for long service life
Vario-Constamatic (VC)-Full wave electronics with thumbwheel for working with materials requiring customized speeds, which remain almost constant under load
Electronic safety shutdown of the motor for safe working in case the tool stops unexpectedly
Electronic overload protection, soft start and restart protection
Slim housing for ideal handling
With metaBOX, the smart solution for transportation and storage
$
1,529.98
Qty:
Part #:272320
- AX Item Number 272320. Country of Origin MEX. Harmonized Tariff 8467290055:
Qty:
Qty:
Part #:729-5625-20
- 3-1/2 Max HP Fixed-Base Production Router
Milwaukee's heavy-duty, 3-1/2 max hp fixed-base production router, model 5625-20, features a powerful 15 amp Milwaukee-built motor with electronic variable speed (10,000-22,000 rpm), premium feedback circuitry and soft-start. To ensure a consistent, quality finish, the 36-position speed dial allows the user to precisely match the tool rpm to the bit diameter while the premium electronic feedback circuitry maintains speed and power under load. For controlled start-ups and reduced motor wear, the 5625-20 router also features a reliable electronic soft-start. Fully-loaded for production free-hand and router table routing, the router features Milwaukee's exclusive linear height adjustment system with above-the-table access, providing fast, precise coarse adjustments to within 1/8 in. and micro-fine adjustments to within 1/64 in. Unlike helical systems, the motor doesn&rsquot spin as the height is changed, ensuring that the motor controls and power cord remain in a constant, optimal position. The revolutionary system can be accessed from above a router table with the included T-wrench or any 3/8 in. hex socket wrench with extension, eliminating the need for awkward, below the table adjustments or the need for an auxiliary router lift. With an industry standard bolt-hole pattern and router base diameter along with removable handles for insert plate clearance, the 5625-20 readily converts any existing table or production jig set-up. For added protection when table-mounted, the router features an exclusive motor contamination shield that keeps damaging debris out without sacrificing airflow. The router also features a durable, rubber shield for dust-free access to the height adjustment system. For maximum operator control and comfort, the 5625-20 router has impact-resistant, tactile-grip handles set wide apart and angled forward. A heavy-duty, 22 amp switch and speed control dial positions are conveniently located to allow the operator full motor control while keeping both hands on the tool. The router features a durable, machined aluminum motor housing and base along with premium 1/2 in. self-releasing collet, 100% sealed ball bearings and a durable 8 ft. power cord with flexible strain relief for years of accurate, reliable operation.
Qty:
Part #:729-9565
- 1 Ton Electric Chain Hoist
All Milwaukee Professional Electric Chain Hoists offer an array of load lift and height options. With 1/2 to 2 Ton capacities and 10 ft. to 20 ft. lifting heights, you can order a Milwaukee Electric Chain Hoist to meet your roughest needs. All offer a multi-disc magnetic brake for positive load holding and spotting. Adjustable upper and lower limit switches, overload limiting clutch and latch-type ridged top hook. You can get single or three-phase voltage motors to meet your operation power requirements. The 24-volt pushbutton station fits easily in your hand to allow thumb, trigger or two-handed operation.
Qty:
Part #:729-48-11-2401
- Business Unit Tools. Product Level 1 Tools M12. Product Level 2 Tools Batteries. Product Level 3 TOL 1.5 AHr Battery. Product Level 4 TOL RL Single. Product Level 5 . AX Item Number 48112401. Country of Origin MYS. Harmonized Tariff 8507600020.:
Qty:
Part #:277120
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools System Enhancement. Product Level 3 TOL Pumps & Inflators. Product Level 4 TOL Pumps. AX Item Number 277120. Country of Origin THA. Harmonized Tariff 8413810040.:
Qty:
Part #:729-2733-20
- Country of Origin CHN:
Qty:
Part #:729-2475-20
- Business Unit Tools. Product Level 1 Tools M12. Product Level 2 Tools System Enhancement. Product Level 3 TOL Pumps & Inflators. Product Level 4 TOL Inflators. Product Level 5 TOL Blank. AX Item Number 247520. Country of Origin TWN. Harmonized Tariff 8414801685.:
Qty:
Part #:729-2737B-20
- Country of Origin VNM:
Qty:
Part #:485918
- M18&trade REDLITHIUM&trade FORGE&trade XC8.0 Starter Kit (Replaces 48-59-1880)
Our M18&trade REDLITHIUM&trade FORGE&trade XC8.0 Starter Kit delivers HIGH OUTPUT&trade 12.0 power in a smaller size and the longest life vs REDLITHIUM&trade batteries. REDLITHIUM&trade FORGE&trade are Milwaukee's most powerful, fastest charging, and longest life batteries. The REDLTIHIUM&trade FORGE&trade XC8.0 delivers 8 amp hours of runtime, but with the same power as the M18&trade REDLITHIUM&trade HIGH OUTPUT&trade HD12.0 in a smaller size and lighter weight design. This lithium-ion battery has the longest life, the most recharges, and the best performance over the life of the battery. It is also designed with resistant housing for increased protection against exposure to common oils, greases, and solvents. Built-in REDLINK&trade Intelligence protects the battery from overloads, preventing you from damaging your cordless power tools in heavy-duty situations. The REDLITHIUM&trade FORGE&trade XC8.0 battery is fully compatible with 275+ M18&trade solutions. Our M18&trade & M12&trade Rapid Charger charges battery packs up to 40% faster, reducing your downtime and maximizing your productivity. The battery charger accepts all MILWAUKEE® M18&trade and M12&trade batteries, providing a charging upgrade for both systems. The battery charger communicates directly with your battery pack to monitor cell voltage, temperature and charge status to ensure a full charge.
Qty:
Qty:
Part #:112450
- Business Unit Tools. Product Level 1 Tools M12. Product Level 2 Tools Batteries. Product Level 3 TOL 5.0 AHr Battery. Product Level 4 TOL HO Single. Product Level 5 TOL Blank. AX Item Number 48112450. Country of Origin CHN. Harmonized Tariff 8507600020.:
Qty:
Part #:481118
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Batteries. Product Level 3 TOL 5.0 AHr Battery. Product Level 4 TOL RL Single. Product Level 5 TOL Blank. AX Item Number 48111850R. Country of Origin CHN. Harmonized Tariff 8507600020.:
Qty:
Part #:729-2545-20
- Business Unit Tools. Product Level 1 Tools M12. Product Level 2 Tools Cutting. Product Level 3 TOL Wood Cutting. Product Level 4 TOL Jig Saw. Product Level 5 TOL Blank. AX Item Number 254520. Country of Origin CHN. Harmonized Tariff 8467220070.:
Qty:
Part #:134-DCF850P1
- DEWALT 20V MAX ATOMIC Cordless Brushless 1/4 in Impact Driver Drill Kit (1) Lithium Ion Battery with Charger (Replaces DCF850P2)
Maneuver With Ease - Access difficult-to-reach spots with a compact, ergonomic design.
High-Performance Brushless Motor - Drive large-diameter screws with 1,825 in-lb. of max torque and 3,250 rpm.
Pro-Level Control - Work precisely with a variable 3-speed trigger.
Brighten Work Areas - Help enhance visibility in dimly lit spaces with the integrated 3-LED work light.
Part of the ATOMIC COMPACT SERIES - ATOMIC power tools are designed to be compact and powerful for jobs in tight spaces and feature 20V MAX compatibility.
Tackle tough jobs and maneuver in small spaces with the ATOMIC 20V MAX 3-Speed 1/4 in. Impact Driver. At less than 4 in. (front to back), this Impact Driver features 1,825 in-lbs. of max torque and 3,250 rpm for driving large screws.
Includes
(1) Tool
(1) Belt Hook
(1) 20V Max 5.0Ah Battery
(1) Charger
(1) Contractor Bag
Qty:
Displaying: 1 - 16 of 16 Matching Items