Battery
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Power Tools: Battery Charger Drill Multi-Tool Press Tool Thread Rod Cutter
Part #:729-2922-22
- M18&trade FORCE LOGIC&trade Press Tool w/ ONE-KEY&trade w/ 1/2"-2" CTS Jaws
Our M18&trade FORCE LOGIC&trade Press Tool with ONE-KEY&trade with 1/2"-2" CTS Jaws is the industry&rsquos first press tool with remote tracking, management, and lockout and is the smallest, most intelligent press tool on the market. The state-of-the-art press tool features an in-line design and brushless motor, enabling more run-time per charge and faster cycle times while being significantly smaller and nearly 20% lighter than the leading competitor. Like all MILWAUKEE® press tools, the in-line design with a forward hand position unlocks your ability to press with one hand and will fit nearly anywhere you can fit your arm. Equipped with REDLINK&trade electronics, the cordless press tool also provides the highest level of press accuracy and reliability available in the industry. Auto-cycle ensures a full press every time and the pre-press battery check prevents the tool from starting a press it can&rsquot complete. This press tool is ONE-KEY&trade enabled, logging, and uploading data from every press for retrieval via the ONE-KEY&trade desktop or mobile app. This allows for performance monitoring and provides you peace of mind in quality connections. With ½&rdquo to 4&rdquo capacity and compatibility with over 20 unique fitting systems, the plumbing press tool is a comprehensive press solution for plumbers and mechanical contractors. In addition to the press tool, this kit includes two M18&trade REDLITHIUM&trade CP2.0 battery packs, 1/2 in., 3/4 in., 1 in., 1 1/4 in, 1 1/2 in., and 2 in. jaws, and a carrying case.
Qty:
Part #:834-600580420
- BE 75-16 (600580420) Drill Cardboard box
Robust die cast aluminum gear housing for optimum heat dissipation and durability
Rotating carbon brush bridge for maximum performance even in counter-clockwise operation for removing stubborn screws
Vario (V)-electronics for working at customized speeds to suit various application materials.
Metabo S-automatic torque limiting clutch mechanical decoupling of the drive for safe working should the drill stop unexpectedly.
Spindle with hexagonal recess for screwdriver bits for working without chuck
Suitable for powerful drilling of larger diameters and for stirring thick liquid-like materials
$
350.61
Qty:
Part #:510513
- M18&trade & M12&trade Multi-Voltage Charger
Always be ready for your next job with this cross-system charger. The M18&trade & M12&trade Multi-Voltage Charger accepts all M18&trade and M12&trade batteries, so you&rsquoll always be prepared and productive, especially on jobs that require a mix of M12 and M18 Milwaukee cordless power tools. This versatile unit charges batteries sequentially, reducing your time to manage charge cycles. The charger communicates directly with the battery pack to monitor cell voltage, temperature and charge status to ensure a full charge. Power up your Milwaukee compact batteries in 30 minutes and extended capacity batteries in 60 minutes, without the need for extra chargers on the jobsite.
Qty:
Part #:522042
- M18&trade Six Pack Sequential Charger
The M18&trade Six Pack Sequential Charger offers a compact design, integrated hang holes for vertical mounting, and a pass through plug to conserve outlet space. The new unit will charge M18&trade compact batteries in 30 minutes and extended capacity (XC) batteries in 60 minutes. With this new six pack charger, users can reduce the amount of time spent changing out batteries, increasing productivity on the jobsite.
Qty:
closeout
$309.00 MSRP
$
219.75
Part #:514777
- CLOSEOUTS Only 1 Left!
- M12&trade Cordless LITHIUM-ION Multi-Tool Kit (Discontinued, Being Replaced by Tool Only 2426-20)
The Milwaukee® M12&trade Cordless LITHIUM-ION Multi-Tool Kit offers versatility, power and control to complete problematic jobsite applications. Ideal for remodelers, flooring contractors, maintenance repair technicians and electricians, the cordless Multi-Tool cuts, grinds, sands and scrapes at odd angles and in areas difficult to work. It&rsquos powered by the M12&trade REDLITHIUM Battery to deliver up to 25% more runtime than the competition. Use it to make flush or plunge cuts, remove grout, sand and tackle other awkward jobs. The M12 Multi-Tool operates from 5,000 to 20,000 OPM and allows users to match the speed to the application. The all-metal gear case provides high durability, while the over-molded, ergonomic handle offers extra control. With the universal adapter (included), the Multi-Tool is compatible with most competitor accessories for even greater versatility. The kit includes 2 M12 REDLITHIUM battery packs and a charger, 5 assorted sanding sheets, sanding pad, wood cutting blade and contractor bag.
Qty:
Part #:729-48-59-2819
- 28-Volt Charger
Power up V28&trade and M28&trade Lithium-Ion batteries in less than one hour. Milwaukee's 28-Volt Charger quickly charges V28 and M28 Lithium-Ion batteries for less downtime on the job. The high-visibility LED light displays the charge status from across the room so you can monitor recharges without interrupting your work. The unit&rsquos pass-through plug conserves valuable outlet space. Get single-charger simplicity when working with all of your V28 and M28 cordless power tools.
Qty:
closeout
$
118.00
Qty:
Part #:514778
- M18&trade Cordless Multi-Tool (Tool Only)
The Milwaukee® M18&trade Cordless Multi-Tool cuts up to 50% faster and delivers up to 2X more cuts per charge than the competitors. With best-in-class speed and performance, the cordless Multi-Tool offers the versatility to complete problematic jobsite applications. Ideal for remodelers, flooring contractors, maintenance repair technicians and electricians, the cordless Multi-Tool cuts, grinds, sands and scrapes at odd angles and in areas difficult to
Qty:
Part #:729-2872-20
- M18&trade Brushless Threaded Rod Cutter
Our M18&trade Brushless Threaded Rod Cutter is Milwaukee's dedicated solution for cutting the most common threaded rod sizes on the job site, including coarse 1/4", 3/8" and 1/2" mild steel to 1/4" and 3/8" stainless steel. The cordless threaded rod cutter is powered by a brushless motor and delivers 400+ cuts while powered by an M18&trade REDLITHIUM&trade 2.0Ah Battery. The four-sided cutting dies allow you to cut multiple sizes of threaded rod on one tool by simply rotating the dies. The all thread cutter has the clearest line of sight and delivers clean, burr-free cuts enabling you to thread a nut on by hand without having to file down the ends. The rod cutter features optimized blade geometry and cut speed to prevent chips and sparks while cutting. It has auto jaw opening allowing you to perform fast, repetitive cuts while a reverse button helps prevent unintended cuts. Its centered grip provides the best balance for one-handed overhead trims, while the flat horizontal design provides you with a stable surface for benchtop cuts.
Qty:
Part #:729-2872-21
- M18&trade Brushless Threaded Rod Cutter Kit
Our M18&trade Brushless Threaded Rod Cutter Kit is Milwaukee's dedicated solution for cutting the most common threaded rod sizes on the job site, including coarse 1/4", 3/8" and 1/2" mild steel to 1/4" and 3/8" stainless steel. The cordless threaded rod cutter is powered by a brushless motor and delivers 400+ cuts while powered by an M18&trade REDLITHIUM&trade 2.0Ah Battery. The four-sided cutting dies allow you to cut multiple sizes of threaded rod on one tool by simply rotating the dies. The all thread cutter has the clearest line of sight and delivers clean, burr-free cuts enabling you to thread a nut on by hand without having to file down the ends. The rod cutter features optimized blade geometry and cut speed to prevent chips and sparks while cutting. It has auto jaw opening allowing you to perform fast, repetitive cuts while a reverse button helps prevent unintended cuts. Its centered grip provides the best balance for one-handed overhead trims, while the flat horizontal design provides you with a stable surface for benchtop cuts. The Milwaukee Threaded Rod Cutter kit includes one M18&trade REDLITHIUM&trade 2.0Ah Battery, a multi-voltage charger, and a carrying case.
Qty:
Qty:
Qty:
Part #:729-2473-20
- M12&trade FORCE LOGIC&trade Press Tool
Our M12&trade FORCE LOGIC&trade Press Tool Kit is the lightest press tool on the market and represents a new level in portability and accessibility around installed pipe. The M12&trade press tool features a one-handed, in-line design enabling you to operate the tool nearly anywhere you can fit your arm. Built-in REDLINK&trade technology enables the plumbing press tool to monitor the force output, delivering you with quality connections. A visual indicator alerts you when a secure connection has been achieved and when the tool needs calibration. The cordless press tool features the best calibration standards, only requiring service every 32,000 crimps. This allows you to perform up to 4X more connections between services, keeping the tool on the job site up to 4X longer than competitive units. When used with our MILWAUKEE® press jaws, this tool delivers quality press connections on all major fitting brands. Our FORCE LOGIC&trade press tool is powered by Milwaukee M12&trade REDLITHIUM&trade batteries, allowing you to Cut, Fasten and Connect on One System.
Qty:
Part #:729-2473-22
- M12&trade FORCE LOGIC&trade Press Tool Kit with Jaws
Our M12&trade FORCE LOGIC&trade Press Tool Kit with Jaws is the lightest press tool on the market and represents a new level in portability and accessibility around installed pipe. The M12&trade press tool features a one-handed, in-line design enabling you to operate the tool nearly anywhere you can fit your arm. Built-in REDLINK&trade technology enables the plumbing press tool to monitor the force output, delivering you with quality connections. A visual indicator alerts you when a secure connection has been achieved and when the tool needs calibration. The cordless press tool features the best calibration standards, only requiring service every 32,000 crimps. This allows you to perform up to 4X more connections between services, keeping the tool on the job site up to 4X longer than competitive units. When used with our MILWAUKEE® press jaws, this tool delivers quality press connections on all major fitting brands. Our FORCE LOGIC&trade press tool is powered by Milwaukee M12&trade REDLITHIUM&trade batteries, allowing you to Cut, Fasten and Connect on One System.
Qty:
Part #:729-48-11-2401
- Business Unit Tools. Product Level 1 Tools M12. Product Level 2 Tools Batteries. Product Level 3 TOL 1.5 AHr Battery. Product Level 4 TOL RL Single. Product Level 5 . AX Item Number 48112401. Country of Origin MYS. Harmonized Tariff 8507600020.:
Qty:
Part #:729-48-59-1807
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Batteries. Product Level 3 TOL Chargers. Product Level 4 TOL Chargers. AX Item Number 48591807. Country of Origin VNM. Harmonized Tariff 8504409550.:
Qty:
Part #:729-2922-20
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Plumbing. Product Level 3 TOL Press. Product Level 4 TOL Tool (No Jaws). Product Level 5 TOL Force Logic. AX Item Number 277320. Country of Origin DEU. Harmonized Tariff 8467290090.:
Qty:
Part #:729-2773-20L
- Country of Origin DEU:
Qty:
Part #:729-48-59-1810
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Batteries. Product Level 3 TOL Chargers. Product Level 4 TOL Chargers. AX Item Number 48591810. Country of Origin VNM. Harmonized Tariff 8504409550.:
Qty:
Part #:485918
- M18&trade REDLITHIUM&trade FORGE&trade XC8.0 Starter Kit (Replaces 48-59-1880)
Our M18&trade REDLITHIUM&trade FORGE&trade XC8.0 Starter Kit delivers HIGH OUTPUT&trade 12.0 power in a smaller size and the longest life vs REDLITHIUM&trade batteries. REDLITHIUM&trade FORGE&trade are Milwaukee's most powerful, fastest charging, and longest life batteries. The REDLTIHIUM&trade FORGE&trade XC8.0 delivers 8 amp hours of runtime, but with the same power as the M18&trade REDLITHIUM&trade HIGH OUTPUT&trade HD12.0 in a smaller size and lighter weight design. This lithium-ion battery has the longest life, the most recharges, and the best performance over the life of the battery. It is also designed with resistant housing for increased protection against exposure to common oils, greases, and solvents. Built-in REDLINK&trade Intelligence protects the battery from overloads, preventing you from damaging your cordless power tools in heavy-duty situations. The REDLITHIUM&trade FORGE&trade XC8.0 battery is fully compatible with 275+ M18&trade solutions. Our M18&trade & M12&trade Rapid Charger charges battery packs up to 40% faster, reducing your downtime and maximizing your productivity. The battery charger accepts all MILWAUKEE® M18&trade and M12&trade batteries, providing a charging upgrade for both systems. The battery charger communicates directly with your battery pack to monitor cell voltage, temperature and charge status to ensure a full charge.
Qty:
Qty:
Part #:729-2526-21XC
- Business Unit Tools. Product Level 1 Tools M12. Product Level 2 Tools Cutting. Product Level 3 TOL Multi-Tools. Product Level 4 TOL Multi-Tools. Product Level 5 TOL FUEL. AX Item Number 252621XC. Country of Origin VNM. Harmonized Tariff 8467290090.:
Qty:
Part #:591809
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Batteries. Product Level 3 TOL Chargers. Product Level 4 TOL Chargers. AX Item Number 48591809. Country of Origin VNM. Harmonized Tariff 8504409550.:
Qty:
Part #:112450
- Business Unit Tools. Product Level 1 Tools M12. Product Level 2 Tools Batteries. Product Level 3 TOL 5.0 AHr Battery. Product Level 4 TOL HO Single. Product Level 5 TOL Blank. AX Item Number 48112450. Country of Origin CHN. Harmonized Tariff 8507600020.:
Qty:
Displaying: 1 - 24 of 28 Matching Items