Battery
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Power Tools: Battery Combihammer Deomolition Hammer Inflator Multi-Tool Power Tool Accessory Press Tool Rotary Tool
Part #:729-5446-21
- 1-3/4" SDS Max Demolition Hammer
Get best-in-class power and the highest overload protection for the toughest demolition jobs. The SDS-Max Demolition Hammer has a heavy-duty crank piston mechanism that delivers 8.8 ft-lbs of impact energy for hard-hitting performance in any concrete. For lighter applications, the two-speed impact mode allows you to reduce BPM to 2,200. Advanced Constant Power Technology electronics and a mechanical clutch enhance your control and the demolition hammer&rsquos long-term durability. The Anti-Vibration System and side D-handle ensure safe, comfortable use. The tool comes with a carrying case.
Qty:
Part #:729-49-16-2767
- M18 Htiw 2767/2863 Protective Boot
For use with Milwaukee M18 FUEL&trade High Torque Impact Wrenches, Models 2762-20, 2763-20, and 2764-20 only. Not for use on or near live electrical circuits. Use on any other product may result in damage to tool motor and may void tool warranty.
Qty:
Part #:729-2922-22
- M18&trade FORCE LOGIC&trade Press Tool w/ ONE-KEY&trade w/ 1/2"-2" CTS Jaws
Our M18&trade FORCE LOGIC&trade Press Tool with ONE-KEY&trade with 1/2"-2" CTS Jaws is the industry&rsquos first press tool with remote tracking, management, and lockout and is the smallest, most intelligent press tool on the market. The state-of-the-art press tool features an in-line design and brushless motor, enabling more run-time per charge and faster cycle times while being significantly smaller and nearly 20% lighter than the leading competitor. Like all MILWAUKEE® press tools, the in-line design with a forward hand position unlocks your ability to press with one hand and will fit nearly anywhere you can fit your arm. Equipped with REDLINK&trade electronics, the cordless press tool also provides the highest level of press accuracy and reliability available in the industry. Auto-cycle ensures a full press every time and the pre-press battery check prevents the tool from starting a press it can&rsquot complete. This press tool is ONE-KEY&trade enabled, logging, and uploading data from every press for retrieval via the ONE-KEY&trade desktop or mobile app. This allows for performance monitoring and provides you peace of mind in quality connections. With ½&rdquo to 4&rdquo capacity and compatibility with over 20 unique fitting systems, the plumbing press tool is a comprehensive press solution for plumbers and mechanical contractors. In addition to the press tool, this kit includes two M18&trade REDLITHIUM&trade CP2.0 battery packs, 1/2 in., 3/4 in., 1 in., 1 1/4 in, 1 1/2 in., and 2 in. jaws, and a carrying case.
Qty:
closeout
$309.00 MSRP
$
219.75
Part #:514777
- CLOSEOUTS Only 1 Left!
- M12&trade Cordless LITHIUM-ION Multi-Tool Kit (Discontinued, Being Replaced by Tool Only 2426-20)
The Milwaukee® M12&trade Cordless LITHIUM-ION Multi-Tool Kit offers versatility, power and control to complete problematic jobsite applications. Ideal for remodelers, flooring contractors, maintenance repair technicians and electricians, the cordless Multi-Tool cuts, grinds, sands and scrapes at odd angles and in areas difficult to work. It&rsquos powered by the M12&trade REDLITHIUM Battery to deliver up to 25% more runtime than the competition. Use it to make flush or plunge cuts, remove grout, sand and tackle other awkward jobs. The M12 Multi-Tool operates from 5,000 to 20,000 OPM and allows users to match the speed to the application. The all-metal gear case provides high durability, while the over-molded, ergonomic handle offers extra control. With the universal adapter (included), the Multi-Tool is compatible with most competitor accessories for even greater versatility. The kit includes 2 M12 REDLITHIUM battery packs and a charger, 5 assorted sanding sheets, sanding pad, wood cutting blade and contractor bag.
Qty:
Part #:508585
- Applications; Drilling anchor, rebar and through holes in concrete and masonry – possible diameter range 4-28 mm, recommended diameter range 10-20 mm. Chiselling in brick and block, corrective chiseling and surface finishing on concrete. Driving anchor screws and concrete screw anchors. Drilling in wood and metal using the optional quick-release chuck and drill bits with smooth shank up to 13 mm diameter.:
$
1,134.06
Qty:
Part #:514778
- M18&trade Cordless Multi-Tool (Tool Only)
The Milwaukee® M18&trade Cordless Multi-Tool cuts up to 50% faster and delivers up to 2X more cuts per charge than the competitors. With best-in-class speed and performance, the cordless Multi-Tool offers the versatility to complete problematic jobsite applications. Ideal for remodelers, flooring contractors, maintenance repair technicians and electricians, the cordless Multi-Tool cuts, grinds, sands and scrapes at odd angles and in areas difficult to
Qty:
Qty:
Qty:
Part #:729-2473-20
- M12&trade FORCE LOGIC&trade Press Tool
Our M12&trade FORCE LOGIC&trade Press Tool Kit is the lightest press tool on the market and represents a new level in portability and accessibility around installed pipe. The M12&trade press tool features a one-handed, in-line design enabling you to operate the tool nearly anywhere you can fit your arm. Built-in REDLINK&trade technology enables the plumbing press tool to monitor the force output, delivering you with quality connections. A visual indicator alerts you when a secure connection has been achieved and when the tool needs calibration. The cordless press tool features the best calibration standards, only requiring service every 32,000 crimps. This allows you to perform up to 4X more connections between services, keeping the tool on the job site up to 4X longer than competitive units. When used with our MILWAUKEE® press jaws, this tool delivers quality press connections on all major fitting brands. Our FORCE LOGIC&trade press tool is powered by Milwaukee M12&trade REDLITHIUM&trade batteries, allowing you to Cut, Fasten and Connect on One System.
Qty:
Part #:729-2473-22
- M12&trade FORCE LOGIC&trade Press Tool Kit with Jaws
Our M12&trade FORCE LOGIC&trade Press Tool Kit with Jaws is the lightest press tool on the market and represents a new level in portability and accessibility around installed pipe. The M12&trade press tool features a one-handed, in-line design enabling you to operate the tool nearly anywhere you can fit your arm. Built-in REDLINK&trade technology enables the plumbing press tool to monitor the force output, delivering you with quality connections. A visual indicator alerts you when a secure connection has been achieved and when the tool needs calibration. The cordless press tool features the best calibration standards, only requiring service every 32,000 crimps. This allows you to perform up to 4X more connections between services, keeping the tool on the job site up to 4X longer than competitive units. When used with our MILWAUKEE® press jaws, this tool delivers quality press connections on all major fitting brands. Our FORCE LOGIC&trade press tool is powered by Milwaukee M12&trade REDLITHIUM&trade batteries, allowing you to Cut, Fasten and Connect on One System.
Qty:
Part #:729-48-11-2401
- Business Unit Tools. Product Level 1 Tools M12. Product Level 2 Tools Batteries. Product Level 3 TOL 1.5 AHr Battery. Product Level 4 TOL RL Single. Product Level 5 . AX Item Number 48112401. Country of Origin MYS. Harmonized Tariff 8507600020.:
Qty:
Part #:729-2922-20
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Plumbing. Product Level 3 TOL Press. Product Level 4 TOL Tool (No Jaws). Product Level 5 TOL Force Logic. AX Item Number 277320. Country of Origin DEU. Harmonized Tariff 8467290090.:
Qty:
Part #:729-2773-20L
- Country of Origin DEU:
Qty:
Part #:729-2475-20
- Business Unit Tools. Product Level 1 Tools M12. Product Level 2 Tools System Enhancement. Product Level 3 TOL Pumps & Inflators. Product Level 4 TOL Inflators. Product Level 5 TOL Blank. AX Item Number 247520. Country of Origin TWN. Harmonized Tariff 8414801685.:
Qty:
Part #:485918
- M18&trade REDLITHIUM&trade FORGE&trade XC8.0 Starter Kit (Replaces 48-59-1880)
Our M18&trade REDLITHIUM&trade FORGE&trade XC8.0 Starter Kit delivers HIGH OUTPUT&trade 12.0 power in a smaller size and the longest life vs REDLITHIUM&trade batteries. REDLITHIUM&trade FORGE&trade are Milwaukee's most powerful, fastest charging, and longest life batteries. The REDLTIHIUM&trade FORGE&trade XC8.0 delivers 8 amp hours of runtime, but with the same power as the M18&trade REDLITHIUM&trade HIGH OUTPUT&trade HD12.0 in a smaller size and lighter weight design. This lithium-ion battery has the longest life, the most recharges, and the best performance over the life of the battery. It is also designed with resistant housing for increased protection against exposure to common oils, greases, and solvents. Built-in REDLINK&trade Intelligence protects the battery from overloads, preventing you from damaging your cordless power tools in heavy-duty situations. The REDLITHIUM&trade FORGE&trade XC8.0 battery is fully compatible with 275+ M18&trade solutions. Our M18&trade & M12&trade Rapid Charger charges battery packs up to 40% faster, reducing your downtime and maximizing your productivity. The battery charger accepts all MILWAUKEE® M18&trade and M12&trade batteries, providing a charging upgrade for both systems. The battery charger communicates directly with your battery pack to monitor cell voltage, temperature and charge status to ensure a full charge.
Qty:
Part #:729-2526-21XC
- Business Unit Tools. Product Level 1 Tools M12. Product Level 2 Tools Cutting. Product Level 3 TOL Multi-Tools. Product Level 4 TOL Multi-Tools. Product Level 5 TOL FUEL. AX Item Number 252621XC. Country of Origin VNM. Harmonized Tariff 8467290090.:
Qty:
Part #:112450
- Business Unit Tools. Product Level 1 Tools M12. Product Level 2 Tools Batteries. Product Level 3 TOL 5.0 AHr Battery. Product Level 4 TOL HO Single. Product Level 5 TOL Blank. AX Item Number 48112450. Country of Origin CHN. Harmonized Tariff 8507600020.:
Qty:
Part #:481118
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Batteries. Product Level 3 TOL 5.0 AHr Battery. Product Level 4 TOL RL Single. Product Level 5 TOL Blank. AX Item Number 48111850R. Country of Origin CHN. Harmonized Tariff 8507600020.:
Qty:
Part #:729-49-16-2697X
- 1/2" - 2" IPS-P Pivoting Press Ring Kit for M18&trade FORCE LOGIC&trade Press Tools
Our IPS-P Pivoting Press Ring Kits are designed for use with M18&trade & M12&trade FORCE LOGIC&trade Press Tool on Viega® MegaPress®, Apollo® PowerPress® and other press fitting systems. The IPS-P Pivoting Press Ring Kit is a more efficient alternative to welding and threading, enabling you to press connections on schedule 5 up to schedule 40 black iron pipe and 304/316 stainless steel pipe. Pivoting functionality delivers greater access in tight spaces when paired with a compatible Milwaukee® Ring Jaw and FORCE LOGIC&trade Press Tool. Our press blocking system prevents improper ring and ring jaw mismatch, providing peace of mind in quality connections. The IPS-P Pivoting Press Rings, combined with a compatible Milwaukee® Ring Jaw and in-line FORCE LOGIC&trade Press Tool, deliver unrivaled access in tight spaces and around installed pipes, providing you with controlled, flameless copper connections for unmatched productivity.
Qty:
Displaying: 1 - 19 of 19 Matching Items