Battery
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Power Tools: Battery Drill/Driver Drill Press Tool Sawzall Thread Rod Cutter
Part #:729-2922-22
- M18&trade FORCE LOGIC&trade Press Tool w/ ONE-KEY&trade w/ 1/2"-2" CTS Jaws
Our M18&trade FORCE LOGIC&trade Press Tool with ONE-KEY&trade with 1/2"-2" CTS Jaws is the industry&rsquos first press tool with remote tracking, management, and lockout and is the smallest, most intelligent press tool on the market. The state-of-the-art press tool features an in-line design and brushless motor, enabling more run-time per charge and faster cycle times while being significantly smaller and nearly 20% lighter than the leading competitor. Like all MILWAUKEE® press tools, the in-line design with a forward hand position unlocks your ability to press with one hand and will fit nearly anywhere you can fit your arm. Equipped with REDLINK&trade electronics, the cordless press tool also provides the highest level of press accuracy and reliability available in the industry. Auto-cycle ensures a full press every time and the pre-press battery check prevents the tool from starting a press it can&rsquot complete. This press tool is ONE-KEY&trade enabled, logging, and uploading data from every press for retrieval via the ONE-KEY&trade desktop or mobile app. This allows for performance monitoring and provides you peace of mind in quality connections. With ½&rdquo to 4&rdquo capacity and compatibility with over 20 unique fitting systems, the plumbing press tool is a comprehensive press solution for plumbers and mechanical contractors. In addition to the press tool, this kit includes two M18&trade REDLITHIUM&trade CP2.0 battery packs, 1/2 in., 3/4 in., 1 in., 1 1/4 in, 1 1/2 in., and 2 in. jaws, and a carrying case.
Qty:
Part #:834-600580420
- BE 75-16 (600580420) Drill Cardboard box
Robust die cast aluminum gear housing for optimum heat dissipation and durability
Rotating carbon brush bridge for maximum performance even in counter-clockwise operation for removing stubborn screws
Vario (V)-electronics for working at customized speeds to suit various application materials.
Metabo S-automatic torque limiting clutch mechanical decoupling of the drive for safe working should the drill stop unexpectedly.
Spindle with hexagonal recess for screwdriver bits for working without chuck
Suitable for powerful drilling of larger diameters and for stirring thick liquid-like materials
$
350.61
Qty:
Part #:501901
- 15.0 Amp Super Sawzall® Recip Saw
The 15.0 Amp Super Sawzall® Recip Saw is the fastest, most durable recip saw in the world. It is the first Sawzall® Recip Saw to include Constant Power Technology&trade which maintains constant speed and power under load for unmatched cutting performance. The 15.0 amp motor provides the industry's highest overload protection. The patented Gear Protecting Clutch extends gear and motor life by absorbing high impact forces caused by sudden blade lock-ups. The patented Counter Balance Mechanism reduces user vibration.
Qty:
Part #:729-2407-22
- M12&trade 3/8&rdquo Drill/Driver Kit
Our M12&trade 3/8&rdquo Drill/Driver Kit drills and fastens up to 35% faster than its competitors and is the only tool in its class that has an all-metal locking chuck. The powerful compact cordless drill driver delivers 275 in-lbs of torque &ndash up to 25% more torque than the competition &ndash and 0-400/0-1,500 RPM. Its compact, lightweight and durable design offers you greater comfort and efficiency on the job site. The all-metal single-sleeve ratcheting chuck gives you superior bit grip so you won't have to stop for bit retightening or risk losing bits. The drill driver features an onboard LED light and fuel gauge helping you increase productivity and avoid interruptions. The REDLITHIUM&trade Battery Pack gives you more work per charge and more work over pack life than the competitors. In addition to the compact drill driver, the kit includes two M12&trade REDLITHIUM&trade batteries, a 30-minute charger and carrying case.
Qty:
Part #:729-2606-22CT
- M18&trade Compact 1/2" Drill Driver Kit
The most compact drill driver in its class is more powerful than the competition.Built with a Milwaukee® 4-Pole frameless motor, the M18&trade Compact 1/2" Drill Driver delivers 500 in-lbs of torque and up to 1,800 RPM. At only 7-1/4" length, this drill driver allows you access to the tightest work spaces. An all-metal gear case and 1/2" metal chuck provide maximum durability, even on the most challenging worksites. REDLINK&trade Intelligence provides advanced protection in abusive situations and manages the tool's temperature to provide maximum life. The REDLITHIUM&trade Battery Pack delivers more work per charge and more work over pack life than the competitors. The kit includes two M18&trade Compact REDLITHIUM batteries, an M18&trade and M12&trade multi-voltage charger, and a carrying case.
Qty:
Part #:729-3601-20
- M18&trade Compact Brushless 1/2" Drill/ Driver
The MILWAUKEE® M18&trade ½&rdquo Compact Brushless Drill/Driver is more compact with faster speed in application. The compact drill is 5.7&rdquo in length and lightweight at 2.3 lbs without battery allowing for excellent control while working in overhead or tight spaces. The brushless motor was built to ensure optimal tool performance delivering 550 in-lbs of torque and 0-1,700 RPM, which makes this cordless drill able to tackle a wide range of drilling and fastening applications. REDLINK&trade Intelligence paired with MILWAUKEE® REDLITHIUM&trade M18&trade batteries ensures efficient power delivery resulting in less down time recharging batteries. The compact cordless drill has premium components with an all-metal gear case and ½&rdquo metal chuck providing durability that professionals require. The Compact Brushless ½&rdquo Drill/Driver is part of MILWAUKEE® M18&trade system, fully compatible with over 250+ solutions.
Qty:
Part #:729-2606-20
- M18&trade Compact 1/2" Drill Driver (Tool Only)
The most compact drill driver in its class is more powerful than the competition. Built with a Milwaukee® 4-Pole frameless motor, the M18&trade Compact 1/2" Drill Driver delivers 500 in-lbs of torque and up to 1,800 RPM. At only 7-1/4" length, this drill driver allows you access to the tightest work spaces. An all-metal gear case and 1/2" metal chuck provide maximum durability, even on the most challenging worksites. REDLINK&trade Intelligence provides advanced protection in abusive situations and manages the tool's temperature to provide maximum life.
Qty:
Part #:729-2803-20
- M18 FUEL&trade 1/2" Drill Driver (Tool Only) (Discontinued, Replaced by 2903-20)
The M18 FUEL&trade ½&rdquo Drill/Driver is the Industry's Most Powerful Drill by delivering Up to 60% More Power, Up To 1.5&rdquo Shorter length and Up To 2X Faster Speed Under Heavy Load. The POWERSTATE&trade Brushless motor delivers 1,200 in-lbs of torque and 2,000 RPMs, providing fast drilling through demanding applications. At 6.9&rdquo in length, this is the most compact drill in its class, giving better access in tight spaces and reducing fatigue. The REDLINK PLUS&trade intelligence ensures maximum performance and protects from overloads, heating and over-discharge. The REDLITHIUM XC5.0&trade Battery Pack delivers more work per charge and more work over the life of the pack when compared to competitors. The all metal ratcheting chuck is the best in class by providing increased bit grip strength and corrosion resistance.
Qty:
Part #:729-2803-22
- M18 FUEL&trade 1/2" Drill Driver Kit (Discontinued, Replaced by 2903-22)
The M18 FUEL&trade ½&rdquo Drill/Driver is the Industry's Most Powerful Drill by delivering Up to 60% More Power, Up To 1.5&rdquo Shorter length and Up To 2X Faster Speed Under Heavy Load. The POWERSTATE&trade Brushless motor delivers 1,200 in-lbs of torque and 2,000 RPMs, providing fast drilling through demanding applications. At 6.9&rdquo in length, this is the most compact drill in its class, giving better access in tight spaces and reducing fatigue. The REDLINK PLUS&trade intelligence ensures maximum performance and protects from overloads, heating and over-discharge. The REDLITHIUM XC5.0&trade Battery Pack delivers more work per charge and more work over the life of the pack when compared to competitors. The all metal ratcheting chuck is the best in class by providing increased bit grip strength and corrosion resistance.
Qty:
Part #:729-2872-20
- M18&trade Brushless Threaded Rod Cutter
Our M18&trade Brushless Threaded Rod Cutter is Milwaukee's dedicated solution for cutting the most common threaded rod sizes on the job site, including coarse 1/4", 3/8" and 1/2" mild steel to 1/4" and 3/8" stainless steel. The cordless threaded rod cutter is powered by a brushless motor and delivers 400+ cuts while powered by an M18&trade REDLITHIUM&trade 2.0Ah Battery. The four-sided cutting dies allow you to cut multiple sizes of threaded rod on one tool by simply rotating the dies. The all thread cutter has the clearest line of sight and delivers clean, burr-free cuts enabling you to thread a nut on by hand without having to file down the ends. The rod cutter features optimized blade geometry and cut speed to prevent chips and sparks while cutting. It has auto jaw opening allowing you to perform fast, repetitive cuts while a reverse button helps prevent unintended cuts. Its centered grip provides the best balance for one-handed overhead trims, while the flat horizontal design provides you with a stable surface for benchtop cuts.
Qty:
Part #:729-2893-22CX
- M18 Brushless 2-Tool Combo Kit, Hammer Drill/Impact Driver
Our M18&trade Brushless 2-Tool Combo Kit (2893-22CX) offers the best in class drilling and fastening solutions. The 1/2" Hammer Drill (2902-20) and 1/4" Hex Impact Driver (2850-20) feature the M18&trade cordless system's patented technologies and electronics, innovative motor design, and superior ergonomics, providing the most efficient blend of power, weight and performance in its class. The Brushless 1/2in. Hammer Drill is the most powerful drill in its class, delivering 725 in.-lbs. of torque. The 1/4 in. Hex Impact Driver has the fastest application speed in its class and delivers 1,600 in.-lbs. of torque. Both of our compact tools feature MILWAUKEE® brushless motors optimized specifically for the tool. Built-in REDLINK&trade electronics enhances the performance of the M18&trade REDLITHIUM&trade batteries, providing more efficient power delivery and fewer trips to the charger. This combo kit includes our M18&trade 1/2" Hammer Drill, M18&trade 1/4" Hex Impact Driver, (1) M18&trade REDLITHIUM XC4.0 Battery Pack, (1) M18&trade REDLITHIUM CP2.0 Battery Pack, M18&trade/M12&trade Multi-Voltage Charger, (2 )belt clips, Side Handle, and Contractor Bag.
Qty:
Part #:729-2872-21
- M18&trade Brushless Threaded Rod Cutter Kit
Our M18&trade Brushless Threaded Rod Cutter Kit is Milwaukee's dedicated solution for cutting the most common threaded rod sizes on the job site, including coarse 1/4", 3/8" and 1/2" mild steel to 1/4" and 3/8" stainless steel. The cordless threaded rod cutter is powered by a brushless motor and delivers 400+ cuts while powered by an M18&trade REDLITHIUM&trade 2.0Ah Battery. The four-sided cutting dies allow you to cut multiple sizes of threaded rod on one tool by simply rotating the dies. The all thread cutter has the clearest line of sight and delivers clean, burr-free cuts enabling you to thread a nut on by hand without having to file down the ends. The rod cutter features optimized blade geometry and cut speed to prevent chips and sparks while cutting. It has auto jaw opening allowing you to perform fast, repetitive cuts while a reverse button helps prevent unintended cuts. Its centered grip provides the best balance for one-handed overhead trims, while the flat horizontal design provides you with a stable surface for benchtop cuts. The Milwaukee Threaded Rod Cutter kit includes one M18&trade REDLITHIUM&trade 2.0Ah Battery, a multi-voltage charger, and a carrying case.
Qty:
Part #:501579
- M18&trade Cordless LITHIUM-ION 2-Tool Combo Kit
Our M18&trade Cordless Lithium-Ion 2-Tool Combo Kit includes our M18&trade Compact Drill/Driver (2606-20) and M18&trade 1/4 in. Hex Impact Driver (2656-20). The M18&trade cordless system's patented technologies and electronics, innovative motor design, and superior ergonomics provide you with the most efficient blend of power, weight, and performance in its class. The compact drill/driver and impact driver are powered by our REDLITHIUM&trade lithium-ion batteries, delivering more torque, more power, and longer run-time than the competition. The kit includes one M18&trade Compact Drill/Driver (2606-20), one M18&trade 1/4 in. Hex Impact Driver (2656-20), two compact REDLITHIUM&trade CP1.5AH lithium-ion batteries, an M18&trade/M12&trade Multi-Voltage charger, a belt clip, and a contractor bag.
Qty:
Qty:
Part #:729-2805-20
- M18 FUEL&trade 1/2" Drill/Driver w/ ONE-KEY&trade (Discontinued, Replaced by 2905-20)
Our M18 FUEL&trade 1/2" Drill/Driver with ONE-KEY&trade is the industry's most powerful drill driver, delivering Up To 60% More Power, is Up To 1.5" Shorter Length and delivers Up To 2X Faster Speed Under Heavy Load. The POWERSTATE&trade Brushless Motor produces 1,200 in-lbs of torque and 2,000 RPMs providing you with fast drilling through demanding applications. At 6.9" in length, this is the most compact drill in its class, giving you better access in tight spaces. REDLINK PLUS&trade Intelligence tool technology allows you to maximize performance while protecting the drill from overloads, heating, and over-discharge. Our M18 REDLITHIUM&trade Battery Packs (not included) allow the cordless drill to deliver more work per charge and more work over the life of the packs than competitors. The best-in-class all-metal ratcheting chuck provides increased bit strength and corrosion resistance. With ONE-KEY&trade, you gain the ability to Customize, Track and Manage your tool. Anti-Kickback technology increases your control in bind-up situations and reduces unwanted shut-downs, with the added benefit of sensitivity control and ability to turn on and off based on application. If your tool is ever lost or stolen, its tracking functionality can lock it out to protect your investment.
Qty:
Part #:729-2722-20
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Cutting. Product Level 3 TOL SAWZALL. Product Level 4 TOL Bare. Product Level 5 TOL FUEL. AX Item Number 272220. Country of Origin CHN. Harmonized Tariff 8467220070.:
Qty:
Part #:729-2473-20
- M12&trade FORCE LOGIC&trade Press Tool
Our M12&trade FORCE LOGIC&trade Press Tool Kit is the lightest press tool on the market and represents a new level in portability and accessibility around installed pipe. The M12&trade press tool features a one-handed, in-line design enabling you to operate the tool nearly anywhere you can fit your arm. Built-in REDLINK&trade technology enables the plumbing press tool to monitor the force output, delivering you with quality connections. A visual indicator alerts you when a secure connection has been achieved and when the tool needs calibration. The cordless press tool features the best calibration standards, only requiring service every 32,000 crimps. This allows you to perform up to 4X more connections between services, keeping the tool on the job site up to 4X longer than competitive units. When used with our MILWAUKEE® press jaws, this tool delivers quality press connections on all major fitting brands. Our FORCE LOGIC&trade press tool is powered by Milwaukee M12&trade REDLITHIUM&trade batteries, allowing you to Cut, Fasten and Connect on One System.
Qty:
Part #:729-2473-22
- M12&trade FORCE LOGIC&trade Press Tool Kit with Jaws
Our M12&trade FORCE LOGIC&trade Press Tool Kit with Jaws is the lightest press tool on the market and represents a new level in portability and accessibility around installed pipe. The M12&trade press tool features a one-handed, in-line design enabling you to operate the tool nearly anywhere you can fit your arm. Built-in REDLINK&trade technology enables the plumbing press tool to monitor the force output, delivering you with quality connections. A visual indicator alerts you when a secure connection has been achieved and when the tool needs calibration. The cordless press tool features the best calibration standards, only requiring service every 32,000 crimps. This allows you to perform up to 4X more connections between services, keeping the tool on the job site up to 4X longer than competitive units. When used with our MILWAUKEE® press jaws, this tool delivers quality press connections on all major fitting brands. Our FORCE LOGIC&trade press tool is powered by Milwaukee M12&trade REDLITHIUM&trade batteries, allowing you to Cut, Fasten and Connect on One System.
Qty:
Part #:729-48-11-2401
- Business Unit Tools. Product Level 1 Tools M12. Product Level 2 Tools Batteries. Product Level 3 TOL 1.5 AHr Battery. Product Level 4 TOL RL Single. Product Level 5 . AX Item Number 48112401. Country of Origin MYS. Harmonized Tariff 8507600020.:
Qty:
Part #:729-2922-20
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Plumbing. Product Level 3 TOL Press. Product Level 4 TOL Tool (No Jaws). Product Level 5 TOL Force Logic. AX Item Number 277320. Country of Origin DEU. Harmonized Tariff 8467290090.:
Qty:
Part #:729-2773-20L
- Country of Origin DEU:
Qty:
Part #:729-2893-22
- M18 Brushless 2-Tool Combo Kit, Hammer Drill/ 3-Speed Impact Driver
Our M18&trade Brushless 2-Tool Combo Kit (2893-22) offers the best in class drilling and fastening solutions. The 1/2" Brushless Hammer Drill (2902-20) and 1/4" Hex Brushless 3 Speed Impact Driver (2851-20) feature the M18&trade cordless system's patented technologies and electronics, innovative motor design, and superior ergonomics, providing the most efficient blend of power, weight and performance in its class. The brushless 1/2" Hammer Drill is the most powerful drill in its class, delivering 725 in.-lbs. of torque. The 1/4" Hex 3 Speed Impact Driver has the fastest application speed in its class and delivers 1,600 in.-lbs. of torque. Both of our compact tools feature MILWAUKEE® brushless motors optimized specifically for the tool. Built-in REDLINK&trade electronics enhances the performance of the M18&trade REDLITHIUM&trade batteries, providing more efficient power delivery and fewer trips to the charger. This combo kit includes our M18 Brushless 1/2" Hammer Drill, M18&trade Brushless 1/4" Hex Impact Driver, (2) M18&trade REDLITHIUM&trade XC4.0 Batteries, a M18&trade/M12&trade Multi-Voltage Charger, Side Handle, (2) Belt Clips and a Contractor Bag
Qty:
Part #:485918
- M18&trade REDLITHIUM&trade FORGE&trade XC8.0 Starter Kit (Replaces 48-59-1880)
Our M18&trade REDLITHIUM&trade FORGE&trade XC8.0 Starter Kit delivers HIGH OUTPUT&trade 12.0 power in a smaller size and the longest life vs REDLITHIUM&trade batteries. REDLITHIUM&trade FORGE&trade are Milwaukee's most powerful, fastest charging, and longest life batteries. The REDLTIHIUM&trade FORGE&trade XC8.0 delivers 8 amp hours of runtime, but with the same power as the M18&trade REDLITHIUM&trade HIGH OUTPUT&trade HD12.0 in a smaller size and lighter weight design. This lithium-ion battery has the longest life, the most recharges, and the best performance over the life of the battery. It is also designed with resistant housing for increased protection against exposure to common oils, greases, and solvents. Built-in REDLINK&trade Intelligence protects the battery from overloads, preventing you from damaging your cordless power tools in heavy-duty situations. The REDLITHIUM&trade FORGE&trade XC8.0 battery is fully compatible with 275+ M18&trade solutions. Our M18&trade & M12&trade Rapid Charger charges battery packs up to 40% faster, reducing your downtime and maximizing your productivity. The battery charger accepts all MILWAUKEE® M18&trade and M12&trade batteries, providing a charging upgrade for both systems. The battery charger communicates directly with your battery pack to monitor cell voltage, temperature and charge status to ensure a full charge.
Qty:
Part #:112450
- Business Unit Tools. Product Level 1 Tools M12. Product Level 2 Tools Batteries. Product Level 3 TOL 5.0 AHr Battery. Product Level 4 TOL HO Single. Product Level 5 TOL Blank. AX Item Number 48112450. Country of Origin CHN. Harmonized Tariff 8507600020.:
Qty:
Displaying: 1 - 24 of 29 Matching Items