Battery
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Power Tools: Battery Impact Driver Jig Saw Press Tool Right Angle Grinder Rotary Tool Thread Rod Cutter
Part #:729-2922-22
- M18&trade FORCE LOGIC&trade Press Tool w/ ONE-KEY&trade w/ 1/2"-2" CTS Jaws
Our M18&trade FORCE LOGIC&trade Press Tool with ONE-KEY&trade with 1/2"-2" CTS Jaws is the industry&rsquos first press tool with remote tracking, management, and lockout and is the smallest, most intelligent press tool on the market. The state-of-the-art press tool features an in-line design and brushless motor, enabling more run-time per charge and faster cycle times while being significantly smaller and nearly 20% lighter than the leading competitor. Like all MILWAUKEE® press tools, the in-line design with a forward hand position unlocks your ability to press with one hand and will fit nearly anywhere you can fit your arm. Equipped with REDLINK&trade electronics, the cordless press tool also provides the highest level of press accuracy and reliability available in the industry. Auto-cycle ensures a full press every time and the pre-press battery check prevents the tool from starting a press it can&rsquot complete. This press tool is ONE-KEY&trade enabled, logging, and uploading data from every press for retrieval via the ONE-KEY&trade desktop or mobile app. This allows for performance monitoring and provides you peace of mind in quality connections. With ½&rdquo to 4&rdquo capacity and compatibility with over 20 unique fitting systems, the plumbing press tool is a comprehensive press solution for plumbers and mechanical contractors. In addition to the press tool, this kit includes two M18&trade REDLITHIUM&trade CP2.0 battery packs, 1/2 in., 3/4 in., 1 in., 1 1/4 in, 1 1/2 in., and 2 in. jaws, and a carrying case.
Qty:
Part #:729-2872-20
- M18&trade Brushless Threaded Rod Cutter
Our M18&trade Brushless Threaded Rod Cutter is Milwaukee's dedicated solution for cutting the most common threaded rod sizes on the job site, including coarse 1/4", 3/8" and 1/2" mild steel to 1/4" and 3/8" stainless steel. The cordless threaded rod cutter is powered by a brushless motor and delivers 400+ cuts while powered by an M18&trade REDLITHIUM&trade 2.0Ah Battery. The four-sided cutting dies allow you to cut multiple sizes of threaded rod on one tool by simply rotating the dies. The all thread cutter has the clearest line of sight and delivers clean, burr-free cuts enabling you to thread a nut on by hand without having to file down the ends. The rod cutter features optimized blade geometry and cut speed to prevent chips and sparks while cutting. It has auto jaw opening allowing you to perform fast, repetitive cuts while a reverse button helps prevent unintended cuts. Its centered grip provides the best balance for one-handed overhead trims, while the flat horizontal design provides you with a stable surface for benchtop cuts.
Qty:
Part #:729-2872-21
- M18&trade Brushless Threaded Rod Cutter Kit
Our M18&trade Brushless Threaded Rod Cutter Kit is Milwaukee's dedicated solution for cutting the most common threaded rod sizes on the job site, including coarse 1/4", 3/8" and 1/2" mild steel to 1/4" and 3/8" stainless steel. The cordless threaded rod cutter is powered by a brushless motor and delivers 400+ cuts while powered by an M18&trade REDLITHIUM&trade 2.0Ah Battery. The four-sided cutting dies allow you to cut multiple sizes of threaded rod on one tool by simply rotating the dies. The all thread cutter has the clearest line of sight and delivers clean, burr-free cuts enabling you to thread a nut on by hand without having to file down the ends. The rod cutter features optimized blade geometry and cut speed to prevent chips and sparks while cutting. It has auto jaw opening allowing you to perform fast, repetitive cuts while a reverse button helps prevent unintended cuts. Its centered grip provides the best balance for one-handed overhead trims, while the flat horizontal design provides you with a stable surface for benchtop cuts. The Milwaukee Threaded Rod Cutter kit includes one M18&trade REDLITHIUM&trade 2.0Ah Battery, a multi-voltage charger, and a carrying case.
Qty:
Qty:
Part #:729-2473-20
- M12&trade FORCE LOGIC&trade Press Tool
Our M12&trade FORCE LOGIC&trade Press Tool Kit is the lightest press tool on the market and represents a new level in portability and accessibility around installed pipe. The M12&trade press tool features a one-handed, in-line design enabling you to operate the tool nearly anywhere you can fit your arm. Built-in REDLINK&trade technology enables the plumbing press tool to monitor the force output, delivering you with quality connections. A visual indicator alerts you when a secure connection has been achieved and when the tool needs calibration. The cordless press tool features the best calibration standards, only requiring service every 32,000 crimps. This allows you to perform up to 4X more connections between services, keeping the tool on the job site up to 4X longer than competitive units. When used with our MILWAUKEE® press jaws, this tool delivers quality press connections on all major fitting brands. Our FORCE LOGIC&trade press tool is powered by Milwaukee M12&trade REDLITHIUM&trade batteries, allowing you to Cut, Fasten and Connect on One System.
Qty:
Part #:729-2473-22
- M12&trade FORCE LOGIC&trade Press Tool Kit with Jaws
Our M12&trade FORCE LOGIC&trade Press Tool Kit with Jaws is the lightest press tool on the market and represents a new level in portability and accessibility around installed pipe. The M12&trade press tool features a one-handed, in-line design enabling you to operate the tool nearly anywhere you can fit your arm. Built-in REDLINK&trade technology enables the plumbing press tool to monitor the force output, delivering you with quality connections. A visual indicator alerts you when a secure connection has been achieved and when the tool needs calibration. The cordless press tool features the best calibration standards, only requiring service every 32,000 crimps. This allows you to perform up to 4X more connections between services, keeping the tool on the job site up to 4X longer than competitive units. When used with our MILWAUKEE® press jaws, this tool delivers quality press connections on all major fitting brands. Our FORCE LOGIC&trade press tool is powered by Milwaukee M12&trade REDLITHIUM&trade batteries, allowing you to Cut, Fasten and Connect on One System.
Qty:
Part #:729-48-11-2401
- Business Unit Tools. Product Level 1 Tools M12. Product Level 2 Tools Batteries. Product Level 3 TOL 1.5 AHr Battery. Product Level 4 TOL RL Single. Product Level 5 . AX Item Number 48112401. Country of Origin MYS. Harmonized Tariff 8507600020.:
Qty:
Part #:729-2922-20
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Plumbing. Product Level 3 TOL Press. Product Level 4 TOL Tool (No Jaws). Product Level 5 TOL Force Logic. AX Item Number 277320. Country of Origin DEU. Harmonized Tariff 8467290090.:
Qty:
Part #:729-2773-20L
- Country of Origin DEU:
Qty:
Part #:729-2737B-20
- Country of Origin VNM:
Qty:
Part #:485918
- M18&trade REDLITHIUM&trade FORGE&trade XC8.0 Starter Kit (Replaces 48-59-1880)
Our M18&trade REDLITHIUM&trade FORGE&trade XC8.0 Starter Kit delivers HIGH OUTPUT&trade 12.0 power in a smaller size and the longest life vs REDLITHIUM&trade batteries. REDLITHIUM&trade FORGE&trade are Milwaukee's most powerful, fastest charging, and longest life batteries. The REDLTIHIUM&trade FORGE&trade XC8.0 delivers 8 amp hours of runtime, but with the same power as the M18&trade REDLITHIUM&trade HIGH OUTPUT&trade HD12.0 in a smaller size and lighter weight design. This lithium-ion battery has the longest life, the most recharges, and the best performance over the life of the battery. It is also designed with resistant housing for increased protection against exposure to common oils, greases, and solvents. Built-in REDLINK&trade Intelligence protects the battery from overloads, preventing you from damaging your cordless power tools in heavy-duty situations. The REDLITHIUM&trade FORGE&trade XC8.0 battery is fully compatible with 275+ M18&trade solutions. Our M18&trade & M12&trade Rapid Charger charges battery packs up to 40% faster, reducing your downtime and maximizing your productivity. The battery charger accepts all MILWAUKEE® M18&trade and M12&trade batteries, providing a charging upgrade for both systems. The battery charger communicates directly with your battery pack to monitor cell voltage, temperature and charge status to ensure a full charge.
Qty:
Part #:729-2485-20
- M12 FUEL&trade 1/4" Right Angle Die Grinder
Our M12 FUEL&trade 1/4" Right Angle Die Grinder is the first cordless right angle die grinder that delivers the performance and size professional service mechanics demand. The die grinder delivers 20% more power than pneumatic competition and features our POWERSTATE&trade Brushless Motor Technology. The cordless die grinder provides you with up to .3 HP performance, best-in-class size to help fit in tight places, and offers you greater mobility and access. The M12&trade die grinder features a 4-Mode speed control and responsive variable-speed trigger giving you unmatched control.
$
0.00
Qty:
Part #:112450
- Business Unit Tools. Product Level 1 Tools M12. Product Level 2 Tools Batteries. Product Level 3 TOL 5.0 AHr Battery. Product Level 4 TOL HO Single. Product Level 5 TOL Blank. AX Item Number 48112450. Country of Origin CHN. Harmonized Tariff 8507600020.:
Qty:
Part #:481118
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Batteries. Product Level 3 TOL 5.0 AHr Battery. Product Level 4 TOL RL Single. Product Level 5 TOL Blank. AX Item Number 48111850R. Country of Origin CHN. Harmonized Tariff 8507600020.:
Qty:
Part #:729-49-16-2697X
- 1/2" - 2" IPS-P Pivoting Press Ring Kit for M18&trade FORCE LOGIC&trade Press Tools
Our IPS-P Pivoting Press Ring Kits are designed for use with M18&trade & M12&trade FORCE LOGIC&trade Press Tool on Viega® MegaPress®, Apollo® PowerPress® and other press fitting systems. The IPS-P Pivoting Press Ring Kit is a more efficient alternative to welding and threading, enabling you to press connections on schedule 5 up to schedule 40 black iron pipe and 304/316 stainless steel pipe. Pivoting functionality delivers greater access in tight spaces when paired with a compatible Milwaukee® Ring Jaw and FORCE LOGIC&trade Press Tool. Our press blocking system prevents improper ring and ring jaw mismatch, providing peace of mind in quality connections. The IPS-P Pivoting Press Rings, combined with a compatible Milwaukee® Ring Jaw and in-line FORCE LOGIC&trade Press Tool, deliver unrivaled access in tight spaces and around installed pipes, providing you with controlled, flameless copper connections for unmatched productivity.
Qty:
Part #:729-2545-20
- Business Unit Tools. Product Level 1 Tools M12. Product Level 2 Tools Cutting. Product Level 3 TOL Wood Cutting. Product Level 4 TOL Jig Saw. Product Level 5 TOL Blank. AX Item Number 254520. Country of Origin CHN. Harmonized Tariff 8467220070.:
Qty:
Part #:134-DCF850P1
- DEWALT 20V MAX ATOMIC Cordless Brushless 1/4 in Impact Driver Drill Kit (1) Lithium Ion Battery with Charger (Replaces DCF850P2)
Maneuver With Ease - Access difficult-to-reach spots with a compact, ergonomic design.
High-Performance Brushless Motor - Drive large-diameter screws with 1,825 in-lb. of max torque and 3,250 rpm.
Pro-Level Control - Work precisely with a variable 3-speed trigger.
Brighten Work Areas - Help enhance visibility in dimly lit spaces with the integrated 3-LED work light.
Part of the ATOMIC COMPACT SERIES - ATOMIC power tools are designed to be compact and powerful for jobs in tight spaces and feature 20V MAX compatibility.
Tackle tough jobs and maneuver in small spaces with the ATOMIC 20V MAX 3-Speed 1/4 in. Impact Driver. At less than 4 in. (front to back), this Impact Driver features 1,825 in-lbs. of max torque and 3,250 rpm for driving large screws.
Includes
(1) Tool
(1) Belt Hook
(1) 20V Max 5.0Ah Battery
(1) Charger
(1) Contractor Bag
Qty:
Displaying: 1 - 17 of 17 Matching Items