Beveling Tool
Hand and Power Tools
View:
Active Filters :
Part #:729-5446-21
- 1-3/4" SDS Max Demolition Hammer
Get best-in-class power and the highest overload protection for the toughest demolition jobs. The SDS-Max Demolition Hammer has a heavy-duty crank piston mechanism that delivers 8.8 ft-lbs of impact energy for hard-hitting performance in any concrete. For lighter applications, the two-speed impact mode allows you to reduce BPM to 2,200. Advanced Constant Power Technology electronics and a mechanical clutch enhance your control and the demolition hammer&rsquos long-term durability. The Anti-Vibration System and side D-handle ensure safe, comfortable use. The tool comes with a carrying case.
Qty:
Part #:729-2657-20
- M18&trade 2-Speed 1/4" Hex Impact Driver (Tool Only)
The M18&trade Cordless 2-Speed 1/4" Hex Impact Driver is the most powerful 1/4" hex compact impact driver in its class and offers the best power to size ratio among like competitors. Featuring a Milwaukee® built 4-Pole frameless motor and optimized impact mechanism, this impact driver delivers up to 2,750 RPM, 3,450 IPM and 1,500 in-lbs of fastening torque for class-leading performance. This is the only tool in its class to offer multiple speed/torque modes through proprietary 2-Mode Drive Control&trade. REDLINK&trade Intelligence provides optimized performance and overload protection using total system communication between tool, battery and charger. The M18&trade Cordless 1/4" Hex Impact Driver features an LED Light to illuminate work surfaces, and includes an all-metal, reversible belt clip for temporary tool storage.
Qty:
Part #:729-2853-20
- M18 FUEL&trade 1/4" Hex Impact Driver (Tool Only) (Discontinued, Replaced by 2953-20)
The M18 FUEL&trade ¼&rdquo Hex Impact Driver is the Fastest, Most Compact, and Most Powerful tool in its class. The POWERSTATE&trade Brushless motor delivers up to 2,000in-lbs of torque and up to 30% Faster Driving speed, increasing user&rsquos productivity for the most demanding fasteners on the job. At only 4.59&rdquo in length, this is the Most Compact tool in its class, allowing users to have more access in tight spaces. The REDLINK PLUS&trade intelligence ensures maximum performance and protects from overloads, heating and or over-discharge. The REDLITHIUM Battery Pack delivers more work per charge and more work over the life of the pack when compared to competitors. The 4-Mode DRIVE CONTROL&trade provides greater control over output speed and power, for greater versatility. The Self-Tapping Screw mode provides faster installation time by reducing stripping of fasteners.
Qty:
Part #:805356
- 14&rdquo Abrasive Cut-Off Machine
Get industry-leading performance, durability and ease of use in a versatile cut-off machine that handles a wide variety of materials. With a powerful 15-amp, 4.0 maximum horsepower motor and speeds up to 3900 RPM, this abrasive cut-off machine allows for fast cutting of drywall track in bundles, angle iron, conduit, pipe, channels, tubing and rebar up to a 5&rdquo maximum capacity. With an adjustable fence, it can make 45° miter cuts quickly and accurately without flipping heavy material. Lightweight yet highly durable, this 14&rdquo cut-off machine travels easily to any jobsite. A large spindle lock button lets you make quick and easy blade changes, even when wearing gloves. A quick-adjust vise clamp lets you make fast adjustments when cutting materials of different sizes.
Qty:
Part #:834-630705000
- Inner support flange for angle grinders (630705000)
For all angle grinders with M 14-spindle thread
$
5.28
Qty:
Part #:834-630706000
- Flange nut M 14 (630706000)
For all angle grinders with M 14-spindle thread
$
4.84
Qty:
closeout
$413.00 MSRP
$
281.00
Part #:213120
- CLOSEOUTS Only 1 Left!
- M18&trade ROCKET&trade Dual Power Tower Light
25% More Light, All Day Operation. The M18&trade ROCKET&trade Dual Power Tower Light is providing more light on the job with 2,500 lumens of TRUEVIEW&trade High Definition Output. All while having the capability being Dual Power, powered by M18&trade or extension cord.The light head can be extended from 4-7&rsquo to light overhead work or minimize shadows when casting light downward. Capable of filling large areas with light, it provides 2,500 lumens in its high mode, 1,100 in medium and 700 in low, and it can run for up to 4, 8, or 12 hours with an M18&trade REDLITHIUM&trade XC 5.0 Battery Pack. It uses TRUEVIEW&trade High Definition Output providing neutral white color and a high color rendering index paired with a Milwaukee® designed reflector to produce an even beam pattern. Its reinforced legs are impact resistant, and its low center of gravity provides a stable base. The light head is protected by an impact-resistant lens and bezel, and it nests into a protective shroud for secure transport and storage. Its LEDs never need to be replaced, and are backed by a limited lifetime warranty. The combination of these technologies offers professionals the highest quality LED lighting solution, on or off the jobsite.
Qty:
Part #:729-2893-22CX
- M18 Brushless 2-Tool Combo Kit, Hammer Drill/Impact Driver
Our M18&trade Brushless 2-Tool Combo Kit (2893-22CX) offers the best in class drilling and fastening solutions. The 1/2" Hammer Drill (2902-20) and 1/4" Hex Impact Driver (2850-20) feature the M18&trade cordless system's patented technologies and electronics, innovative motor design, and superior ergonomics, providing the most efficient blend of power, weight and performance in its class. The Brushless 1/2in. Hammer Drill is the most powerful drill in its class, delivering 725 in.-lbs. of torque. The 1/4 in. Hex Impact Driver has the fastest application speed in its class and delivers 1,600 in.-lbs. of torque. Both of our compact tools feature MILWAUKEE® brushless motors optimized specifically for the tool. Built-in REDLINK&trade electronics enhances the performance of the M18&trade REDLITHIUM&trade batteries, providing more efficient power delivery and fewer trips to the charger. This combo kit includes our M18&trade 1/2" Hammer Drill, M18&trade 1/4" Hex Impact Driver, (1) M18&trade REDLITHIUM XC4.0 Battery Pack, (1) M18&trade REDLITHIUM CP2.0 Battery Pack, M18&trade/M12&trade Multi-Voltage Charger, (2 )belt clips, Side Handle, and Contractor Bag.
Qty:
Part #:810060
- For Use With Mfr. Model Number 600398420, 600407420, 600408420, 600410420, 600418420, 600428420, 600432420, 600464420, 600465420, 600468420, 600476420, 600488420, 600507420, 600548420, 600552420, 600562420, 600572420
$
9.14
Qty:
$
12.25
Qty:
Part #:834-341101480
- For Use With Mfr. Model Number 600160420, 600259420, 600263420, 600280420, 600286420, 600290420, 600292420, 600354420, 600376420, 600388420, 600408420, 600465420, 600562420, 600572420, 600680420, 600683420, 601451420, 601452420, 602131420, 606111420, 606204420, 606205420, 606696420, 606701420, 606702420, 606711420, 606721420, 606722420, 606724420
$
9.14
Qty:
Part #:834-601751750
- KFM 9-3 RF (601751750) Metal Bevelling Tool metaBOX 215
Compact metal beveling tool for 45° chamfers and radii of 2 to 3 mm at visible edges
Surfaces free from oxide and burrs as ideal preparation for the application of powder or paint coatings for maximum protection from corrosion
One-touch controller Patented, tool-free setting of the cutting depth in 0.1" steps stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working
Slim cutter head with standard carbide indexable inserts and ball-bearing stationary seal ring for working in tubes and in curves
Guide stop for uniform finish and high surface quality when finishing straight edges
Bail handle adjusts without tools for secure, even guiding
Metabo Long-life motor with patented dust protection for long service life
Vario-Constamatic (VC)-Full wave electronics with thumbwheel for working with materials requiring customized speeds, which remain almost constant under load
Electronic safety shutdown of the motor for safe working in case the tool stops unexpectedly
Electronic overload protection, soft start and restart protection
Slim housing for ideal handling
With metaBOX, the smart solution for transportation and storage
$
1,529.98
Qty:
Part #:213620
- AX Item Number 213620. Country of Origin CHN. Harmonized Tariff 8513104000:
Qty:
Part #:729-2696-24
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Combo Kits. Product Level 3 TOL 3 - 4 Piece Kits. Product Level 5 TOL Blank. AX Item Number 269624. Country of Origin VNM. Harmonized Tariff 8467290040.:
Qty:
Part #:729-2553-22
- M12 FUEL&trade 1/4" Hex Impact Driver Kit (Discontinued, Replaced by 3453-22)
The M12 FUEL&trade 1/4 in. Hex Impact Driver once again raises the bar for 12V performance with best in class driving speed, power, and size. By focusing on productivity, this Impact Driver gets the job done faster by being over 20% faster in application speed vs. the competition. This tool outputs over 1,300 in. lbs. of torque that allows the user to get more work done by completing a wide range of fastening. Measuring only 5.1&rdquo in length allows for unmatched access in tight spaces. The POWERSTATE&trade Brushless Motor delivers up to 0-3,300 RPM with constant power output to drive screws faster. REDLINK PLUS&trade Intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. For use with M12&trade REDLITHIUM&trade Compact Batteries or Extended Capacity Batteries which deliver more work per charge and more work over the life of the pack than competitive batteries on the market. The 4-Mode DRIVE CONTROL provides greater control over output speed and power for greater versatility by delivering 0-1,300 RPM in Mode 1, 0-2,400 RPM in Mode 2 and 0-3,300 RPM in Mode 3. Mode 4 is Self-Tapping Screw Mode which is designed to reduce walking when starting self-tapping screws as well as reduce overdriving, breaking and stripping out screws.
Qty:
Part #:729-2656-20
- M18&trade 1/4" Hex Impact Driver (Tool Only)
The M18&trade Cordless 1/4" Hex Impact Driver is the most powerful 1/4" hex compact impact driver in its class and offers the best power to size ratio among like competitors. Featuring a Milwaukee® built 4-Pole frameless motor and optimized impact mechanism, this impact driver delivers up to 2,750 RPM, 3,450 IPM and 1,500 in-lbs of fastening torque for class-leading performance. REDLINK&trade Intelligence provides optimized performance and overload protection using total system communication between tool, battery and charger. The M18&trade Cordless 1/4" Hex Impact Driver features an LED Light to illuminate work surfaces, and includes an all-metal, reversible belt clip for temporary tool storage.
Qty:
Part #:088620
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools System Enhancement. Product Level 3 TOL Air Movement. Product Level 4 TOL Fans. AX Item Number 088620. Country of Origin CHN. Harmonized Tariff 8414519090.:
Qty:
Part #:729-2760-20
- M18 FUEL&trade SURGE&trade 1/4" Hex Hydraulic Driver (Tool Only)
The M18 FUEL&trade SURGE&trade 1/4" Hex Hydraulic Driver is the quietest cordless fastening solution on the market. With Milwaukee's new FLUID-DRIVE&trade Hydraulic Powertrain, users will experience up to 50% quieter operation, 3X less vibration for smoother operation, and faster driving speeds compared to standard impacts. The POWERSTATE&trade Brushless Motor delivers up to 0-3,000 RPM with constant power output to drive screws faster. REDLINK PLUS&tradeIntelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. For use with REDLITHIUM&trade Compact Batteries or Extended Capacity Batteries (sold separately), which deliver more work per charge and more work over the life of the pack than competitive batteries on the market. The 4-Mode DRIVE CONTROL&tradeprovides greater control over output speed and power for greater versatility. Self-Tapping Screw Mode is designed to reduce walking when starting self-tapping screws as well as reduce overdriving, breaking and stripping out screws.
Qty:
Part #:729-2733-20
- Country of Origin CHN:
Qty:
Part #:729-2488-20
- Business Unit Tools. Product Level 1 Tools M12. Product Level 2 Tools Metal Working. Product Level 3 TOL Heating Tools. Product Level 4 TOL Blank. Product Level 5 . AX Item Number 248820. Country of Origin THA. Harmonized Tariff 8515110000.:
Qty:
Part #:729-2488-21
- M12&trade Soldering Iron Kit
The M12&trade Soldering Iron delivers fast application speeds by reaching operational temperature in under 18 seconds and maintaining an optimized temperature throughout the most demanding applications. The heat indicator utilizes REDLINK&trade INTELLEGENCE to notify users when the tool is ready-to-use and safe-to-store, eliminating the guesswork. The 3-stop pivoting head provides unmatched access by allowing users the ability to adapt the tool for the application and solder in more confined spaces. The M12&trade Soldering Iron powered by REDLITHIUM&trade battery technology delivers up to 40 minutes of run-time on a M12&trade Compact Battery Pack.
Qty:
Part #:729-2522-20
- Business Unit Tools. Product Level 1 Tools M12. Product Level 2 Tools Cutting. Product Level 3 TOL Shaping and Forming. Product Level 4 TOL Multi-Tools. Product Level 5 TOL FUEL. AX Item Number 252220. Country of Origin MEX. Harmonized Tariff 8467220020.:
Qty:
Displaying: 1 - 24 of 31 Matching Items