Beveling Tool
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Power Tools: Beveling Tool Dust Extractor Rivet Tool Shear Thread Rod Cutter
Part #:506312
- 18 Gauge Shear
This new shear comes with a powerful 6.8 amp Milwaukee built motor. The ergonomic tactile grip is designed for more user comfort allowing you to make that straight cut when needed. The new lightweight, heavy-duty magnesium gear-case has been incorporated in the design for superior balance. The variable speed trigger (0-2500SPM) allows for smoother acceleration and performance when needed.
Qty:
Part #:729-2635-20
- M18&trade Cordless 18 Gauge Double Cut Shear (Tool Only)
With the introduction of the New M18&trade Cordless Shears, Milwaukee® has the most innovative and largest cordless shear selection on the market. By redesigning the body, we provide an inline wrist design that maximizes control during use. Also adding the industry&rsquos only Tool-Free 360° rotating head, our new shears can be used where hand snips have been needed to finish the cut. These innovations brought to each of the 3 new Milwaukee® Cordless Shears are changing the way tradesmen work on the jobsite today.
Qty:
Part #:729-2636-20
- M18&trade 14 Gauge Double Cut Shear (Tool Only)
With the introduction of the New M18&trade Cordless Shears, Milwaukee® has the most innovative and largest cordless shear selection on the market. By redesigning the body, we provide an inline wrist design that maximizes control during use. Also adding the industry&rsquos only Tool-Free 360° rotating head, our new shears can be used where hand snips have been needed to finish the cut. These innovations brought to each of the 3 new Milwaukee® Cordless Shears are changing the way tradesmen work on the jobsite today.
Qty:
Part #:729-2637-20
- M18&trade 18 Gauge Single Cut Shear (Tool Only)
With the introduction of the New M18&trade Cordless Shears, Milwaukee® has the most innovative and largest cordless shear selection on the market. By redesigning the body, we provide an inline wrist design that maximizes control during use. Also adding the industry&rsquos only Tool-Free 360° rotating head, our new shears can be used where hand snips have been needed to finish the cut. These innovations brought to each of the 3 new Milwaukee® Cordless Shears are changing the way tradesmen work on the jobsite today.
Qty:
Part #:729-2872-20
- M18&trade Brushless Threaded Rod Cutter
Our M18&trade Brushless Threaded Rod Cutter is Milwaukee's dedicated solution for cutting the most common threaded rod sizes on the job site, including coarse 1/4", 3/8" and 1/2" mild steel to 1/4" and 3/8" stainless steel. The cordless threaded rod cutter is powered by a brushless motor and delivers 400+ cuts while powered by an M18&trade REDLITHIUM&trade 2.0Ah Battery. The four-sided cutting dies allow you to cut multiple sizes of threaded rod on one tool by simply rotating the dies. The all thread cutter has the clearest line of sight and delivers clean, burr-free cuts enabling you to thread a nut on by hand without having to file down the ends. The rod cutter features optimized blade geometry and cut speed to prevent chips and sparks while cutting. It has auto jaw opening allowing you to perform fast, repetitive cuts while a reverse button helps prevent unintended cuts. Its centered grip provides the best balance for one-handed overhead trims, while the flat horizontal design provides you with a stable surface for benchtop cuts.
Qty:
Part #:729-2872-21
- M18&trade Brushless Threaded Rod Cutter Kit
Our M18&trade Brushless Threaded Rod Cutter Kit is Milwaukee's dedicated solution for cutting the most common threaded rod sizes on the job site, including coarse 1/4", 3/8" and 1/2" mild steel to 1/4" and 3/8" stainless steel. The cordless threaded rod cutter is powered by a brushless motor and delivers 400+ cuts while powered by an M18&trade REDLITHIUM&trade 2.0Ah Battery. The four-sided cutting dies allow you to cut multiple sizes of threaded rod on one tool by simply rotating the dies. The all thread cutter has the clearest line of sight and delivers clean, burr-free cuts enabling you to thread a nut on by hand without having to file down the ends. The rod cutter features optimized blade geometry and cut speed to prevent chips and sparks while cutting. It has auto jaw opening allowing you to perform fast, repetitive cuts while a reverse button helps prevent unintended cuts. Its centered grip provides the best balance for one-handed overhead trims, while the flat horizontal design provides you with a stable surface for benchtop cuts. The Milwaukee Threaded Rod Cutter kit includes one M18&trade REDLITHIUM&trade 2.0Ah Battery, a multi-voltage charger, and a carrying case.
Qty:
Part #:834-601751750
- KFM 9-3 RF (601751750) Metal Bevelling Tool metaBOX 215
Compact metal beveling tool for 45° chamfers and radii of 2 to 3 mm at visible edges
Surfaces free from oxide and burrs as ideal preparation for the application of powder or paint coatings for maximum protection from corrosion
One-touch controller Patented, tool-free setting of the cutting depth in 0.1" steps stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working
Slim cutter head with standard carbide indexable inserts and ball-bearing stationary seal ring for working in tubes and in curves
Guide stop for uniform finish and high surface quality when finishing straight edges
Bail handle adjusts without tools for secure, even guiding
Metabo Long-life motor with patented dust protection for long service life
Vario-Constamatic (VC)-Full wave electronics with thumbwheel for working with materials requiring customized speeds, which remain almost constant under load
Electronic safety shutdown of the motor for safe working in case the tool stops unexpectedly
Electronic overload protection, soft start and restart protection
Slim housing for ideal handling
With metaBOX, the smart solution for transportation and storage
Qty:
Part #:729-2470-21
- M12&trade Plastic Pipe Shear Kit
Our M12&trade Plastic Pipe Shear Kit with the powerful M12&trade 12-Volt Lithium-Ion battery included can slice through 2 inch schedule 80 PVC in just 3 seconds. The pipe shear kit is compatible with M12&trade lithium-ion batteries, giving you more than 200 cuts on a single charge. The stainless steel blade and aluminum jaw are impact and water and rust resistant. The ultra- sharp M12&trade plastic pipe shear with pierce point makes burr-free cuts, allowing you to cut faster, cleaner and closer than traditional shears. PVC close to a wall or mounted to a stud is no challenge for the quick-return, offset blade for maximum efficiency on repetitive cuts. The MILWAUKEE® plastic pipe shear features a variable speed trigger for controlled cuts in warm and cold weather and an on-board fuel gauge that displays remaining battery charge and run time provide you with superior versatility and productivity. In addition to the pipe shear, this kit includes one M12&trade REDLITHIUM&trade CP1.5 battery pack, an M12&trade Lithium-Ion battery charger, and a carrying case.
Qty:
Part #:729-2715-DE
- M18&trade HAMMERVAC&trade Dedicated Dust Extractor
Milwaukee® HAMMERVAC&trade Dedicated Dust Extractor (2715-DE) features an inline dedicated design engineered to connect directly to and be power by the M18&trade 1-1/8&rdquo SDS Plus Rotary Hammer (2715-22). This design allows for a very compact HAMMERVAC&trade and rotary hammer combination to fit in the most confined work spaces. Utilizing the same replaceable certified HEPA filter as other HAMMERVACS&trade, which filter 99.97% of all particles greater than 0.3µm, means more compatibility on the jobsite. For accurate hole depths, this product is built with an adjustable depth stop and ruler for easy and precise adjustments. Featuring a high capacity dust box, users can now work longer without emptying dust box as often.
Qty:
Part #:729-2550-22
- M12&trade Rivet Tool Kit
The M12&trade Rivet Tool is the first cordless solution that delivers fast, easy riveting while maintaining performance, durability, and size. The 2550 can pull up to 250 3/16" stainless steel rivets or 450 1/8" steel rivets on one charge with a 1.5ah battery, and reduces muscle effort from a hand tool by 60%. No compressors or hoses during set up and operation makes this tool a great replacement to pneumatic products. 2X longer life over current cordless solutions delivers greater durability from common jobsite conditions and use. This is the most compact cordless rivet tool on the market, measuring only 6.5&rdquo in length allowing users more access in tight spaces. The M12 Rivet Tool is part of the M12 battery platform, offering 90+ solutions on one battery system.
Qty:
Displaying: 1 - 10 of 10 Matching Items