Beveling Tool
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Power Tools: Beveling Tool Hoist Mag Drill Thread Rod Cutter Work Light
Part #:511341
- M18&trade Work Light
OUTSHINE, OUTLAST. The M18&trade Work Light lasts 600X longer than conventional incandescent bulbs. Powered by the M18&trade REDLITHIUM&trade battery, it runs up to 4X longer on a single charge. Its 135° rotating head allows you to easily direct the light beam at the desired work area, while its integrated hook enables hands-free use.With a sealed aluminum head to provide impact and weather resistance, the cordless work light comes with a limited lifetime LED warranty.
Qty:
Part #:729-2872-20
- M18&trade Brushless Threaded Rod Cutter
Our M18&trade Brushless Threaded Rod Cutter is Milwaukee's dedicated solution for cutting the most common threaded rod sizes on the job site, including coarse 1/4", 3/8" and 1/2" mild steel to 1/4" and 3/8" stainless steel. The cordless threaded rod cutter is powered by a brushless motor and delivers 400+ cuts while powered by an M18&trade REDLITHIUM&trade 2.0Ah Battery. The four-sided cutting dies allow you to cut multiple sizes of threaded rod on one tool by simply rotating the dies. The all thread cutter has the clearest line of sight and delivers clean, burr-free cuts enabling you to thread a nut on by hand without having to file down the ends. The rod cutter features optimized blade geometry and cut speed to prevent chips and sparks while cutting. It has auto jaw opening allowing you to perform fast, repetitive cuts while a reverse button helps prevent unintended cuts. Its centered grip provides the best balance for one-handed overhead trims, while the flat horizontal design provides you with a stable surface for benchtop cuts.
Qty:
Part #:729-2872-21
- M18&trade Brushless Threaded Rod Cutter Kit
Our M18&trade Brushless Threaded Rod Cutter Kit is Milwaukee's dedicated solution for cutting the most common threaded rod sizes on the job site, including coarse 1/4", 3/8" and 1/2" mild steel to 1/4" and 3/8" stainless steel. The cordless threaded rod cutter is powered by a brushless motor and delivers 400+ cuts while powered by an M18&trade REDLITHIUM&trade 2.0Ah Battery. The four-sided cutting dies allow you to cut multiple sizes of threaded rod on one tool by simply rotating the dies. The all thread cutter has the clearest line of sight and delivers clean, burr-free cuts enabling you to thread a nut on by hand without having to file down the ends. The rod cutter features optimized blade geometry and cut speed to prevent chips and sparks while cutting. It has auto jaw opening allowing you to perform fast, repetitive cuts while a reverse button helps prevent unintended cuts. Its centered grip provides the best balance for one-handed overhead trims, while the flat horizontal design provides you with a stable surface for benchtop cuts. The Milwaukee Threaded Rod Cutter kit includes one M18&trade REDLITHIUM&trade 2.0Ah Battery, a multi-voltage charger, and a carrying case.
Qty:
Part #:834-601751750
- KFM 9-3 RF (601751750) Metal Bevelling Tool metaBOX 215
Compact metal beveling tool for 45° chamfers and radii of 2 to 3 mm at visible edges
Surfaces free from oxide and burrs as ideal preparation for the application of powder or paint coatings for maximum protection from corrosion
One-touch controller Patented, tool-free setting of the cutting depth in 0.1" steps stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working
Slim cutter head with standard carbide indexable inserts and ball-bearing stationary seal ring for working in tubes and in curves
Guide stop for uniform finish and high surface quality when finishing straight edges
Bail handle adjusts without tools for secure, even guiding
Metabo Long-life motor with patented dust protection for long service life
Vario-Constamatic (VC)-Full wave electronics with thumbwheel for working with materials requiring customized speeds, which remain almost constant under load
Electronic safety shutdown of the motor for safe working in case the tool stops unexpectedly
Electronic overload protection, soft start and restart protection
Slim housing for ideal handling
With metaBOX, the smart solution for transportation and storage
$
1,529.98
Qty:
Qty:
Part #:729-9565
- 1 Ton Electric Chain Hoist
All Milwaukee Professional Electric Chain Hoists offer an array of load lift and height options. With 1/2 to 2 Ton capacities and 10 ft. to 20 ft. lifting heights, you can order a Milwaukee Electric Chain Hoist to meet your roughest needs. All offer a multi-disc magnetic brake for positive load holding and spotting. Adjustable upper and lower limit switches, overload limiting clutch and latch-type ridged top hook. You can get single or three-phase voltage motors to meet your operation power requirements. The 24-volt pushbutton station fits easily in your hand to allow thumb, trigger or two-handed operation.
Qty:
Part #:729-2696-24
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Combo Kits. Product Level 3 TOL 3 - 4 Piece Kits. Product Level 5 TOL Blank. AX Item Number 269624. Country of Origin VNM. Harmonized Tariff 8467290040.:
Qty:
Part #:729-2787-22HD
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Metal Working. Product Level 3 TOL Mag Drills. Product Level 4 TOL Blank. Product Level 5 TOL FUEL. AX Item Number 278722HD. Country of Origin CHN. Harmonized Tariff 8467210010.:
Qty:
Displaying: 1 - 8 of 8 Matching Items