Beveling Tool
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Power Tools: Beveling Tool Blower Router Work Light
Part #:511341
- M18&trade Work Light
OUTSHINE, OUTLAST. The M18&trade Work Light lasts 600X longer than conventional incandescent bulbs. Powered by the M18&trade REDLITHIUM&trade battery, it runs up to 4X longer on a single charge. Its 135° rotating head allows you to easily direct the light beam at the desired work area, while its integrated hook enables hands-free use.With a sealed aluminum head to provide impact and weather resistance, the cordless work light comes with a limited lifetime LED warranty.
Qty:
Part #:834-601751750
- KFM 9-3 RF (601751750) Metal Bevelling Tool metaBOX 215
Compact metal beveling tool for 45° chamfers and radii of 2 to 3 mm at visible edges
Surfaces free from oxide and burrs as ideal preparation for the application of powder or paint coatings for maximum protection from corrosion
One-touch controller Patented, tool-free setting of the cutting depth in 0.1" steps stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working
Slim cutter head with standard carbide indexable inserts and ball-bearing stationary seal ring for working in tubes and in curves
Guide stop for uniform finish and high surface quality when finishing straight edges
Bail handle adjusts without tools for secure, even guiding
Metabo Long-life motor with patented dust protection for long service life
Vario-Constamatic (VC)-Full wave electronics with thumbwheel for working with materials requiring customized speeds, which remain almost constant under load
Electronic safety shutdown of the motor for safe working in case the tool stops unexpectedly
Electronic overload protection, soft start and restart protection
Slim housing for ideal handling
With metaBOX, the smart solution for transportation and storage
Qty:
Part #:272320
- AX Item Number 272320. Country of Origin MEX. Harmonized Tariff 8467290055:
Qty:
Part #:729-5625-20
- 3-1/2 Max HP Fixed-Base Production Router
Milwaukee's heavy-duty, 3-1/2 max hp fixed-base production router, model 5625-20, features a powerful 15 amp Milwaukee-built motor with electronic variable speed (10,000-22,000 rpm), premium feedback circuitry and soft-start. To ensure a consistent, quality finish, the 36-position speed dial allows the user to precisely match the tool rpm to the bit diameter while the premium electronic feedback circuitry maintains speed and power under load. For controlled start-ups and reduced motor wear, the 5625-20 router also features a reliable electronic soft-start. Fully-loaded for production free-hand and router table routing, the router features Milwaukee's exclusive linear height adjustment system with above-the-table access, providing fast, precise coarse adjustments to within 1/8 in. and micro-fine adjustments to within 1/64 in. Unlike helical systems, the motor doesn&rsquot spin as the height is changed, ensuring that the motor controls and power cord remain in a constant, optimal position. The revolutionary system can be accessed from above a router table with the included T-wrench or any 3/8 in. hex socket wrench with extension, eliminating the need for awkward, below the table adjustments or the need for an auxiliary router lift. With an industry standard bolt-hole pattern and router base diameter along with removable handles for insert plate clearance, the 5625-20 readily converts any existing table or production jig set-up. For added protection when table-mounted, the router features an exclusive motor contamination shield that keeps damaging debris out without sacrificing airflow. The router also features a durable, rubber shield for dust-free access to the height adjustment system. For maximum operator control and comfort, the 5625-20 router has impact-resistant, tactile-grip handles set wide apart and angled forward. A heavy-duty, 22 amp switch and speed control dial positions are conveniently located to allow the operator full motor control while keeping both hands on the tool. The router features a durable, machined aluminum motor housing and base along with premium 1/2 in. self-releasing collet, 100% sealed ball bearings and a durable 8 ft. power cord with flexible strain relief for years of accurate, reliable operation.
Qty:
Part #:729-2696-24
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Combo Kits. Product Level 3 TOL 3 - 4 Piece Kits. Product Level 5 TOL Blank. AX Item Number 269624. Country of Origin VNM. Harmonized Tariff 8467290040.:
Qty:
Part #:729-0884-20
- M18&trade Compact Blower (Bare Tool)
The M18&trade Compact Blower delivers the fastest jobsite cleanup. The 0884-20 offers a best in class power to size ratio. The M18&trade Compact Blower has power control that includes a 3-speed electronic switch, lock-on and a variable speed trigger which allows for versatile clearing power. This blower moves air at 160 MPH and 100 CFM for class-leading performance. Featuring a shock-absorbing polymer body and a crush resistant nozzle the M18&trade Compact Blower delivers jobsite durability. Included is a 9&rdquo extension nozzle to clear dust and debris easily from the ground or overhead. The 0884-20 also comes with a universal inflator/deflator. Works with all Milwaukee® M18&trade Batteries (batteries sold separately).
Qty:
Part #:729-2724-20
- Business Unit Outdoor Power Equipment. Product Level 1 OPE M18. Product Level 2 OPE Blowers. Product Level 3 OPE Single Battery. Product Level 4 OPE Handheld. Product Level 5 OPE Fuel. AX Item Number 272420. Country of Origin VNM. Harmonized Tariff 8414596590.:
Qty:
Qty:
Part #:729-2824-20
- Business Unit Outdoor Power Equipment. Product Level 1 OPE M18. Product Level 2 OPE Blowers. Product Level 3 OPE Dual Battery. Product Level 4 OPE Handheld. Product Level 5 OPE Fuel-Dual Battery. AX Item Number 282420. Country of Origin VNM. Harmonized Tariff 8414596590.:
Qty:
Displaying: 1 - 9 of 9 Matching Items