Charger
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Power Tools: Charger Hammer Drill Parts Power Tool Accessory
Part #:729-49-16-2767
- M18 Htiw 2767/2863 Protective Boot
For use with Milwaukee M18 FUEL&trade High Torque Impact Wrenches, Models 2762-20, 2763-20, and 2764-20 only. Not for use on or near live electrical circuits. Use on any other product may result in damage to tool motor and may void tool warranty.
Qty:
$
9.90
Qty:
Part #:510513
- M18&trade & M12&trade Multi-Voltage Charger
Always be ready for your next job with this cross-system charger. The M18&trade & M12&trade Multi-Voltage Charger accepts all M18&trade and M12&trade batteries, so you&rsquoll always be prepared and productive, especially on jobs that require a mix of M12 and M18 Milwaukee cordless power tools. This versatile unit charges batteries sequentially, reducing your time to manage charge cycles. The charger communicates directly with the battery pack to monitor cell voltage, temperature and charge status to ensure a full charge. Power up your Milwaukee compact batteries in 30 minutes and extended capacity batteries in 60 minutes, without the need for extra chargers on the jobsite.
Qty:
Part #:500277
- Key Features
8 ft., three-wire grounded QUIK-LOK® feature allows for fast replacement of a damaged cord Premium grade Hi-Flex wire 5-15P NEMA type plug
Qty:
$
10.19
Qty:
$
99.33
Qty:
Part #:500250
-
TE 2 Rotary hammer Rotary hammer perf pkg TE 2 #3497789
Compact dual-mode, pistol-grip SDS Plus (TE-C) rotary hammer &ndash for hammer drilling and rotary-only drilling
Weight according EPTA-Procedure 01/20036 lb.
Working modeHammer drilling, Drilling
Hammer drilling diameter range5/32 - 7/8 in
Kit Contains
TE 2 120V Rotary Hammer
TE 2 Tool Case
Chuck Grease
Hammer Drill Bit TE-CX 3/8"x6"
Hammer Drill Bit TE-CX 1/4"x6"
Hammer Drill Bit TE-CX 3/16"x6"
Weight according EPTA-Procedure 01/20036 lb.Working modeHammer drilling, DrillingHammer drilling diameter range5/32 - 7/8 inOptimum Hammer drilling range5/32 - 15/32 inSingle impact energy1.3 ft-lbsHammer drilling RPM1200 rpmFull hammering frequency4600 impacts/minuteFunctionalityReverse mode, Depth gaugeTriaxial vibration value for hammer drilling into concrete (ah,HD)13.5 m/s² 1 A-weighted emission sound pressure level91 dB (A) 2 Dimensions (LxWxH)13.9 x 3.5 x 8 mm
$
397.70
Qty:
Part #:502925
- Flange
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee tool. If unable to locate an accessory or repair part please contact Milwaukee at milwaukeetool.com.
$
3.57
Qty:
Part #:522042
- M18&trade Six Pack Sequential Charger
The M18&trade Six Pack Sequential Charger offers a compact design, integrated hang holes for vertical mounting, and a pass through plug to conserve outlet space. The new unit will charge M18&trade compact batteries in 30 minutes and extended capacity (XC) batteries in 60 minutes. With this new six pack charger, users can reduce the amount of time spent changing out batteries, increasing productivity on the jobsite.
Qty:
closeout
$118.00 MSRP
$
75.22
Part #:521215
- CLOSEOUTS Only 1 Left!
- One Hour NiCd AC Charger
The One Hour NiCd Power Plus 120 volt AC charger will recharge 12V, 14.4V and 18V Power Plus Batteries. Recharges both Nickel Cadmium and Nickel Metal Hydride batteries. Charges batteries in one hour.
Qty:
closeout
$11.00 MSRP
$
7.50
Part #:543211
- CLOSEOUTS Only 2 Left!
- Work Light Bulb 18V
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee tool. If unable to locate an accessory or repair part please contact Milwaukee at milwaukeetool.com.
Qty:
Part #:729-48-59-2819
- 28-Volt Charger
Power up V28&trade and M28&trade Lithium-Ion batteries in less than one hour. Milwaukee's 28-Volt Charger quickly charges V28 and M28 Lithium-Ion batteries for less downtime on the job. The high-visibility LED light displays the charge status from across the room so you can monitor recharges without interrupting your work. The unit&rsquos pass-through plug conserves valuable outlet space. Get single-charger simplicity when working with all of your V28 and M28 cordless power tools.
Qty:
Part #:501781
- For Use With Mfr. Model Number 5192, 6101-6, 6880, 6890
$
1.47
Qty:
Part #:501394
- Chuck Key Holder.
This Chuck Key Holder securely attaches chuck key 48-66-3280, 48-66-2110, 48-66-3480, 48-66-3080 or 48-66-3240 to the cordset of your drill which has chuck 48-66-0240, 48-66-0795, 48-66-0797, 48-66-0805, 48-66-1360, 48-66-5185, 48-66-1381or 48-66-2100 on it.
Qty:
Qty:
Part #:521530
- Wheel Guard Kit 7"
This 7 inch Wheel Guard Kit will supply all the necessary hardware required to change the type 27 wheel guard on previous Milwaukee grinder models 6072, 6078, 6065-6, 6066-6, 6068-6, 6096, and 6098. A hand screwdriver is required to assemble this guard to the tool. Use hub adapter 48-03-1000, disc nut 49-40-0380 and nylon washer when using type 27 depressed center wheels (without hub).
$
29.61
Qty:
$
1.58
Qty:
$
5.04
Qty:
Part #:500707
- Key Features
Added efficiency Provides a cutting edge for fast, straight cuts
Versatile For use with several Milwaukee circular saws
Qty:
Displaying: 1 - 24 of 98 Matching Items