Circular Saw
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Power Tools: Circular Saw Fan Press Tool Shear Sliding Compound Miter Saw
- Power Source: Cordless
Part #:729-2922-22
- M18&trade FORCE LOGIC&trade Press Tool w/ ONE-KEY&trade w/ 1/2"-2" CTS Jaws
Our M18&trade FORCE LOGIC&trade Press Tool with ONE-KEY&trade with 1/2"-2" CTS Jaws is the industry&rsquos first press tool with remote tracking, management, and lockout and is the smallest, most intelligent press tool on the market. The state-of-the-art press tool features an in-line design and brushless motor, enabling more run-time per charge and faster cycle times while being significantly smaller and nearly 20% lighter than the leading competitor. Like all MILWAUKEE® press tools, the in-line design with a forward hand position unlocks your ability to press with one hand and will fit nearly anywhere you can fit your arm. Equipped with REDLINK&trade electronics, the cordless press tool also provides the highest level of press accuracy and reliability available in the industry. Auto-cycle ensures a full press every time and the pre-press battery check prevents the tool from starting a press it can&rsquot complete. This press tool is ONE-KEY&trade enabled, logging, and uploading data from every press for retrieval via the ONE-KEY&trade desktop or mobile app. This allows for performance monitoring and provides you peace of mind in quality connections. With ½&rdquo to 4&rdquo capacity and compatibility with over 20 unique fitting systems, the plumbing press tool is a comprehensive press solution for plumbers and mechanical contractors. In addition to the press tool, this kit includes two M18&trade REDLITHIUM&trade CP2.0 battery packs, 1/2 in., 3/4 in., 1 in., 1 1/4 in, 1 1/2 in., and 2 in. jaws, and a carrying case.
Qty:
Part #:263020
- M18&trade 6 ½" Circular Saw (Tool Only)
Qty:
Part #:729-2635-20
- M18&trade Cordless 18 Gauge Double Cut Shear (Tool Only)
With the introduction of the New M18&trade Cordless Shears, Milwaukee® has the most innovative and largest cordless shear selection on the market. By redesigning the body, we provide an inline wrist design that maximizes control during use. Also adding the industry&rsquos only Tool-Free 360° rotating head, our new shears can be used where hand snips have been needed to finish the cut. These innovations brought to each of the 3 new Milwaukee® Cordless Shears are changing the way tradesmen work on the jobsite today.
Qty:
Part #:729-2636-20
- M18&trade 14 Gauge Double Cut Shear (Tool Only)
With the introduction of the New M18&trade Cordless Shears, Milwaukee® has the most innovative and largest cordless shear selection on the market. By redesigning the body, we provide an inline wrist design that maximizes control during use. Also adding the industry&rsquos only Tool-Free 360° rotating head, our new shears can be used where hand snips have been needed to finish the cut. These innovations brought to each of the 3 new Milwaukee® Cordless Shears are changing the way tradesmen work on the jobsite today.
Qty:
Part #:729-2637-20
- M18&trade 18 Gauge Single Cut Shear (Tool Only)
With the introduction of the New M18&trade Cordless Shears, Milwaukee® has the most innovative and largest cordless shear selection on the market. By redesigning the body, we provide an inline wrist design that maximizes control during use. Also adding the industry&rsquos only Tool-Free 360° rotating head, our new shears can be used where hand snips have been needed to finish the cut. These innovations brought to each of the 3 new Milwaukee® Cordless Shears are changing the way tradesmen work on the jobsite today.
Qty:
Part #:729-2834-20
- M18 FUEL&trade 7-1/4&rdquo Circular Saw (Tool Only)
Our M18 FUEL&trade 7-1/4&rdquo Circular Sawis designedfor the professional carpenter, remodelers, and general contractors who rely on high-performing and durable tools. Leveraging the latestincordless technology, this saw offers class-leading performance, providing the power to complete more demanding applications and the cut speed to achieve greater productivity. The POWERSTATE&trade Brushless Motor delivers 6,000 RPM, maintaining high speed under load,providing users the abilityto complete their most demanding applications efficiently. The latestinREDLINK PLUS&trade Electronics ensures maximum tool performance and protection from overload, overheating, and over-discharge. When paired with an M18 REDLITHIUM&trade FORGE&trade HD12.0Batterythissaw delivers750 cuts per charge and is fully compatible with all M18 REDLITHIUM&trade batteries.The ergonomic, compact, and lightweight design makes the sawaperfectsolutionfor all-day cutting.Positive bevel detents and depth detents offer added productivity and reduce downtime. Additionally, the saw has an electric blade brake, LED work light, rafter hook, and all magnesium guards and shoes, keeping the user productive and providing the durability to handle thetoughestjob site conditions.
$
264.00
Qty:
Qty:
Part #:729-2470-21
- M12&trade Plastic Pipe Shear Kit
Our M12&trade Plastic Pipe Shear Kit with the powerful M12&trade 12-Volt Lithium-Ion battery included can slice through 2 inch schedule 80 PVC in just 3 seconds. The pipe shear kit is compatible with M12&trade lithium-ion batteries, giving you more than 200 cuts on a single charge. The stainless steel blade and aluminum jaw are impact and water and rust resistant. The ultra- sharp M12&trade plastic pipe shear with pierce point makes burr-free cuts, allowing you to cut faster, cleaner and closer than traditional shears. PVC close to a wall or mounted to a stud is no challenge for the quick-return, offset blade for maximum efficiency on repetitive cuts. The MILWAUKEE® plastic pipe shear features a variable speed trigger for controlled cuts in warm and cold weather and an on-board fuel gauge that displays remaining battery charge and run time provide you with superior versatility and productivity. In addition to the pipe shear, this kit includes one M12&trade REDLITHIUM&trade CP1.5 battery pack, an M12&trade Lithium-Ion battery charger, and a carrying case.
Qty:
Part #:729-2473-20
- M12&trade FORCE LOGIC&trade Press Tool
Our M12&trade FORCE LOGIC&trade Press Tool Kit is the lightest press tool on the market and represents a new level in portability and accessibility around installed pipe. The M12&trade press tool features a one-handed, in-line design enabling you to operate the tool nearly anywhere you can fit your arm. Built-in REDLINK&trade technology enables the plumbing press tool to monitor the force output, delivering you with quality connections. A visual indicator alerts you when a secure connection has been achieved and when the tool needs calibration. The cordless press tool features the best calibration standards, only requiring service every 32,000 crimps. This allows you to perform up to 4X more connections between services, keeping the tool on the job site up to 4X longer than competitive units. When used with our MILWAUKEE® press jaws, this tool delivers quality press connections on all major fitting brands. Our FORCE LOGIC&trade press tool is powered by Milwaukee M12&trade REDLITHIUM&trade batteries, allowing you to Cut, Fasten and Connect on One System.
Qty:
Part #:729-2473-22
- M12&trade FORCE LOGIC&trade Press Tool Kit with Jaws
Our M12&trade FORCE LOGIC&trade Press Tool Kit with Jaws is the lightest press tool on the market and represents a new level in portability and accessibility around installed pipe. The M12&trade press tool features a one-handed, in-line design enabling you to operate the tool nearly anywhere you can fit your arm. Built-in REDLINK&trade technology enables the plumbing press tool to monitor the force output, delivering you with quality connections. A visual indicator alerts you when a secure connection has been achieved and when the tool needs calibration. The cordless press tool features the best calibration standards, only requiring service every 32,000 crimps. This allows you to perform up to 4X more connections between services, keeping the tool on the job site up to 4X longer than competitive units. When used with our MILWAUKEE® press jaws, this tool delivers quality press connections on all major fitting brands. Our FORCE LOGIC&trade press tool is powered by Milwaukee M12&trade REDLITHIUM&trade batteries, allowing you to Cut, Fasten and Connect on One System.
Qty:
Part #:729-2730-20
- Country of Origin CHN:
Qty:
Part #:729-2922-20
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Plumbing. Product Level 3 TOL Press. Product Level 4 TOL Tool (No Jaws). Product Level 5 TOL Force Logic. AX Item Number 277320. Country of Origin DEU. Harmonized Tariff 8467290090.:
Qty:
Part #:729-2782-20
- Country of Origin CHN:
Qty:
Part #:729-2773-20L
- Country of Origin DEU:
Qty:
Part #:729-2733-20
- Country of Origin CHN:
Qty:
Qty:
Displaying: 1 - 16 of 16 Matching Items