Columbus McKinnon (C-M)
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Brand: Columbus McKinnon (C-M) Flange Jacobs Plumb
$
326.00
Qty:
Part #:510283
- CM Series 632
close radius trolley With revolutionary advances, this shorter, more compact
trolley is 50% lighter than competitive trolleys, yet every bit
as tough. Negotiates radius curves as tight as 7 to 10 inches
Made of highest quality rolled steel
Unique double row, ball bearing wheel design
for greater wear capacity
Larger V-bars available for wider flange adjustment
For low headroom applications
Bearings prepacked with lifetime lubricant
Exclusive Dial-Fit collar quickly adapts trolley to
wide range of beams and patented rails
Dust covers shield and protect bearings
Trolleys available for larger beams, rails or tracks
contact CM
Cast iron trolley guards available (except for 3 ton)
Lifetime warranty
Made in U.S.A.
$
446.00
Qty:
Part #:800373
- The CM Puller is designed for heavy-duty construction and industrial
applications. Used to pull, lift, drag or stretch, it features Tough aluminum alloy construction
and powder coat finish
Weatherproof for outdoor service
Simple construction with fewer parts
for ease of maintenance and lower
inventories
Hoistaloy hardened steel link type
load chain for strength, long wear
life and flexibility
Weatherized Weston-type automatic
braking system for positive load
control
Easy, one-hand operation and
control only 58 pounds of pull
required for 34 ton model capacity
Forged upper and lower hooks with
latches standard
Free wheeling for fast and easy
attachment to load
Upper and lower Latchlok hooks
available for all capacities
Optional Load Limiter protection
device stops transmission of lever
forces protecting against dangerous
overload
Optional anchor sling simplifies
attachment to allow anchor
hook to swivel in tight space
applications (34 & 112 ton
units only)
Optional Load Sentry warns of
overload condition
Optional zinc-plated chain available
Unlimited lift
Lifetime warranty
Metric rated
Made in U.S.A.
Qty:
Part #:800375
- The CM Puller is designed for heavy-duty construction and industrial
applications. Used to pull, lift, drag or stretch, it features Tough aluminum alloy construction
and powder coat finish
Weatherproof for outdoor service
Simple construction with fewer parts
for ease of maintenance and lower
inventories
Hoistaloy hardened steel link type
load chain for strength, long wear
life and flexibility
Weatherized Weston-type automatic
braking system for positive load
control
Easy, one-hand operation and
control only 58 pounds of pull
required for 34 ton model capacity
Forged upper and lower hooks with
latches standard
Free wheeling for fast and easy
attachment to load
Upper and lower Latchlok hooks
available for all capacities
Optional Load Limiter protection
device stops transmission of lever
forces protecting against dangerous
overload
Optional anchor sling simplifies
attachment to allow anchor
hook to swivel in tight space
applications (34 & 112 ton
units only)
Optional Load Sentry warns of
overload condition
Optional zinc-plated chain available
Unlimited lift
Lifetime warranty
Metric rated
Made in U.S.A.
$
1,707.91
Qty:
Part #:800374
- The CM Puller is designed for heavy-duty construction and industrial
applications. Used to pull, lift, drag or stretch, it features Tough aluminum alloy construction
and powder coat finish
Weatherproof for outdoor service
Simple construction with fewer parts
for ease of maintenance and lower
inventories
Hoistaloy hardened steel link type
load chain for strength, long wear
life and flexibility
Weatherized Weston-type automatic
braking system for positive load
control
Easy, one-hand operation and
control only 58 pounds of pull
required for 34 ton model capacity
Forged upper and lower hooks with
latches standard
Free wheeling for fast and easy
attachment to load
Upper and lower Latchlok hooks
available for all capacities
Optional Load Limiter protection
device stops transmission of lever
forces protecting against dangerous
overload
Optional anchor sling simplifies
attachment to allow anchor
hook to swivel in tight space
applications (34 & 112 ton
units only)
Optional Load Sentry warns of
overload condition
Optional zinc-plated chain available
Unlimited lift
Lifetime warranty
Metric rated
Made in U.S.A.
$
1,306.00
Qty:
Part #:841-496-38240-T
- Pipe Flange Aligners, 1/2 in - 1 7/16 in, Threaded
Flange Wizard® Pipe Flange AlignersProduct DetailsFeatures slotted pins with "friction fitting" knurled nuts for flanges to 30" - 150 lbsAll models of the Pipe aligner will two-hole (make 2 holes of the flange horizontally level with the ground) and vertically level the face of the flange in one stepAll models come with 360° vials that just "snap" in and out for easy replacementThe aligner inserts easily into pipe, centers snugly against the inside pipe diameter and automatically aligns with the pipe axis
Qty:
Part #:502452
- Comprehensive Slection Of Jacobs Precision Crafted Keys Meet Any Need.
Qty:
Qty:
Part #:801791
- SERIES 622
MODEL 622-A
1/2 TO 5 TON CAPACITIES
STANDARD LIFTS UP TO 30 FT.
HAND CHAIN HOIST. The CM Series 622 hand chain hoist features
a simple, efficient and economical design. With an ultra-low-headroom profile and lightweight steel construction, the CM 622 is easy to install, even in confined spaces. Redesigned for optimal performance, this hoist requires even less pull force for operation and has larger hook throat openings for easier attachment.
Qty:
Part #:802163
- CM Series 632
close radius trolley With revolutionary advances, this shorter, more compact
trolley is 50% lighter than competitive trolleys, yet every bit
as tough. Negotiates radius curves as tight as 7 to 10 inches
Made of highest quality rolled steel
Unique double row, ball bearing wheel design
for greater wear capacity
Larger V-bars available for wider flange adjustment
For low headroom applications
Bearings prepacked with lifetime lubricant
Exclusive Dial-Fit collar quickly adapts trolley to
wide range of beams and patented rails
Dust covers shield and protect bearings
Trolleys available for larger beams, rails or tracks
contact CM
Cast iron trolley guards available (except for 3 ton)
Lifetime warranty
Made in U.S.A.
$
530.00
Qty:
Part #:801792
- SERIES 622
MODEL 622-A
1/2 TO 5 TON CAPACITIES
STANDARD LIFTS UP TO 30 FT.
HAND CHAIN HOIST. The CM Series 622 hand chain hoist features
a simple, efficient and economical design. With an ultra-low-headroom profile and lightweight steel construction, the CM 622 is easy to install, even in confined spaces. Redesigned for optimal performance, this hoist requires even less pull force for operation and has larger hook throat openings for easier attachment.
$
348.00
Qty:
Part #:801783
- SERIES 622
MODEL 622-A
1/2 TO 5 TON CAPACITIES
STANDARD LIFTS UP TO 30 FT.
HAND CHAIN HOIST. The CM Series 622 hand chain hoist features
a simple, efficient and economical design. With an ultra-low-headroom profile and lightweight steel construction, the CM 622 is easy to install, even in confined spaces. Redesigned for optimal performance, this hoist requires even less pull force for operation and has larger hook throat openings for easier attachment.
$
220.00
Qty:
Part #:501195
- Plain Bearing Design, wide applications- Drill press, wood lathes, portable drills. 1/2in (13mm) Capacity, JACOBS K32 Key.
Qty:
Part #:502404
- Plain Bearing Design, wide applications- Drill press, wood lathes, portable drills. 1/2in (13mm) Capacity, JACOBS K32 Key.
Qty:
Part #:502405
- Jacobs Traditional Plain Bearing Design for Heavy Duty Industrial Drilling and Lathe Work. 1/2in (13mm) Capacity, JACOBS K3 Key.
Qty:
Part #:502406
- Jacobs Traditional Plain Bearing Design for Heavy Duty Industrial Drilling and Lathe Work. 1/2in (13mm) Capacity, JACOBS K3 Key.
Qty:
Part #:502414
- Jacobs Traditional Plain Bearing Design for Heavy Duty Industrial Drilling and Lathe Work. 5/8in (16mm) Capacity, JACOBS K3 Key.
Qty:
Part #:502421
- Plain Bearing Design, wide applications- Drill press, wood lathes, portable drills. 1/2in (13mm) Capacity, JACOBS K32 Key.
Qty:
Part #:502423
- Jacobs Traditional Plain Bearing Design for Heavy Duty Industrial Drilling and Lathe Work. 1/4in (6.5mm) Capacity, JACOBS K7 Key.
Qty:
closeout
$49.57 MSRP
$
48.72
Qty:
Part #:502435
- Jacobs Ball Bearing Construction Design Inside. High Precision and Durability.
Qty:
closeout
$423.02 MSRP
$
283.42
Qty:
Part #:502440
- Jacobs Ball Bearing Construction Design Inside. High Precision and Durability.
Qty:
Part #:502473
- Jacobs AO305 Morse Taper Arbor, 3MT x 5JT - GW 7317N
An Arbor refers to a critical component that plays a pivotal role in various cutting and milling processes. The term is commonly associated with tools such as milling cutters, saws, and other rotary cutting tools.
Specifications
AO Number 305
Chuck End 5JT
For Use with Custom Tool and Work Holding Designs, Specialized Machining Applications
Overall Length 5.94 in
Series Morse Taper Jacobs(R) Taper Arbor
Shank Type - Machining Taper
Spindle End 3MT
Stem Length 5.94 in
Taper Size Morse, Jacobs
Country of Origin China
Qty:
Displaying: 1 - 24 of 66 Matching Items