Columbus McKinnon (C-M)
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Brand: Columbus McKinnon (C-M) Nupla Plumb
$
326.00
Qty:
Part #:510283
- CM Series 632
close radius trolley With revolutionary advances, this shorter, more compact
trolley is 50% lighter than competitive trolleys, yet every bit
as tough. Negotiates radius curves as tight as 7 to 10 inches
Made of highest quality rolled steel
Unique double row, ball bearing wheel design
for greater wear capacity
Larger V-bars available for wider flange adjustment
For low headroom applications
Bearings prepacked with lifetime lubricant
Exclusive Dial-Fit collar quickly adapts trolley to
wide range of beams and patented rails
Dust covers shield and protect bearings
Trolleys available for larger beams, rails or tracks
contact CM
Cast iron trolley guards available (except for 3 ton)
Lifetime warranty
Made in U.S.A.
$
446.00
Qty:
Part #:800373
- The CM Puller is designed for heavy-duty construction and industrial
applications. Used to pull, lift, drag or stretch, it features Tough aluminum alloy construction
and powder coat finish
Weatherproof for outdoor service
Simple construction with fewer parts
for ease of maintenance and lower
inventories
Hoistaloy hardened steel link type
load chain for strength, long wear
life and flexibility
Weatherized Weston-type automatic
braking system for positive load
control
Easy, one-hand operation and
control only 58 pounds of pull
required for 34 ton model capacity
Forged upper and lower hooks with
latches standard
Free wheeling for fast and easy
attachment to load
Upper and lower Latchlok hooks
available for all capacities
Optional Load Limiter protection
device stops transmission of lever
forces protecting against dangerous
overload
Optional anchor sling simplifies
attachment to allow anchor
hook to swivel in tight space
applications (34 & 112 ton
units only)
Optional Load Sentry warns of
overload condition
Optional zinc-plated chain available
Unlimited lift
Lifetime warranty
Metric rated
Made in U.S.A.
Qty:
Part #:800375
- The CM Puller is designed for heavy-duty construction and industrial
applications. Used to pull, lift, drag or stretch, it features Tough aluminum alloy construction
and powder coat finish
Weatherproof for outdoor service
Simple construction with fewer parts
for ease of maintenance and lower
inventories
Hoistaloy hardened steel link type
load chain for strength, long wear
life and flexibility
Weatherized Weston-type automatic
braking system for positive load
control
Easy, one-hand operation and
control only 58 pounds of pull
required for 34 ton model capacity
Forged upper and lower hooks with
latches standard
Free wheeling for fast and easy
attachment to load
Upper and lower Latchlok hooks
available for all capacities
Optional Load Limiter protection
device stops transmission of lever
forces protecting against dangerous
overload
Optional anchor sling simplifies
attachment to allow anchor
hook to swivel in tight space
applications (34 & 112 ton
units only)
Optional Load Sentry warns of
overload condition
Optional zinc-plated chain available
Unlimited lift
Lifetime warranty
Metric rated
Made in U.S.A.
$
1,707.91
Qty:
Part #:800374
- The CM Puller is designed for heavy-duty construction and industrial
applications. Used to pull, lift, drag or stretch, it features Tough aluminum alloy construction
and powder coat finish
Weatherproof for outdoor service
Simple construction with fewer parts
for ease of maintenance and lower
inventories
Hoistaloy hardened steel link type
load chain for strength, long wear
life and flexibility
Weatherized Weston-type automatic
braking system for positive load
control
Easy, one-hand operation and
control only 58 pounds of pull
required for 34 ton model capacity
Forged upper and lower hooks with
latches standard
Free wheeling for fast and easy
attachment to load
Upper and lower Latchlok hooks
available for all capacities
Optional Load Limiter protection
device stops transmission of lever
forces protecting against dangerous
overload
Optional anchor sling simplifies
attachment to allow anchor
hook to swivel in tight space
applications (34 & 112 ton
units only)
Optional Load Sentry warns of
overload condition
Optional zinc-plated chain available
Unlimited lift
Lifetime warranty
Metric rated
Made in U.S.A.
$
1,306.00
Qty:
Part #:841-545-29-035
- Blacksmiths' Cross Pein Sledge Hammer, 3 lb, 14 in Classic Fiberglass Handle, SG
Nupla® Blacksmiths' Cross Pein Sledge HammersProduct DetailsForged steel headShatterproof fiberglass handleNon-slip, comfort grip
Qty:
Qty:
Part #:801791
- SERIES 622
MODEL 622-A
1/2 TO 5 TON CAPACITIES
STANDARD LIFTS UP TO 30 FT.
HAND CHAIN HOIST. The CM Series 622 hand chain hoist features
a simple, efficient and economical design. With an ultra-low-headroom profile and lightweight steel construction, the CM 622 is easy to install, even in confined spaces. Redesigned for optimal performance, this hoist requires even less pull force for operation and has larger hook throat openings for easier attachment.
Qty:
Part #:802163
- CM Series 632
close radius trolley With revolutionary advances, this shorter, more compact
trolley is 50% lighter than competitive trolleys, yet every bit
as tough. Negotiates radius curves as tight as 7 to 10 inches
Made of highest quality rolled steel
Unique double row, ball bearing wheel design
for greater wear capacity
Larger V-bars available for wider flange adjustment
For low headroom applications
Bearings prepacked with lifetime lubricant
Exclusive Dial-Fit collar quickly adapts trolley to
wide range of beams and patented rails
Dust covers shield and protect bearings
Trolleys available for larger beams, rails or tracks
contact CM
Cast iron trolley guards available (except for 3 ton)
Lifetime warranty
Made in U.S.A.
$
530.00
Qty:
Part #:801783
- SERIES 622
MODEL 622-A
1/2 TO 5 TON CAPACITIES
STANDARD LIFTS UP TO 30 FT.
HAND CHAIN HOIST. The CM Series 622 hand chain hoist features
a simple, efficient and economical design. With an ultra-low-headroom profile and lightweight steel construction, the CM 622 is easy to install, even in confined spaces. Redesigned for optimal performance, this hoist requires even less pull force for operation and has larger hook throat openings for easier attachment.
$
220.00
Qty:
Part #:801792
- SERIES 622
MODEL 622-A
1/2 TO 5 TON CAPACITIES
STANDARD LIFTS UP TO 30 FT.
HAND CHAIN HOIST. The CM Series 622 hand chain hoist features
a simple, efficient and economical design. With an ultra-low-headroom profile and lightweight steel construction, the CM 622 is easy to install, even in confined spaces. Redesigned for optimal performance, this hoist requires even less pull force for operation and has larger hook throat openings for easier attachment.
$
348.00
Qty:
$
1,047.25
Qty:
Part #:841-175-2262
- SERIES 622
MODEL 622-A
1/2 TO 5 TON CAPACITIES
STANDARD LIFTS UP TO 30 FT.
HAND CHAIN HOIST. The CM Series 622 hand chain hoist features
a simple, efficient and economical design. With an ultra-low-headroom profile and lightweight steel construction, the CM 622 is easy to install, even in confined spaces. Redesigned for optimal performance, this hoist requires even less pull force for operation and has larger hook throat openings for easier attachment.
$
434.00
Qty:
$
1,441.75
Qty:
$
1,713.25
Qty:
$
1,962.50
Qty:
$
33.25
Qty:
Part #:841-175-4621
- Cyclone hand chain hoist. Most interchangeability of parts
in the industry
Standard Load Limiter for
simple, automatic overload
protection
Enclosed contoured Westontype
automatic brake for
positive load control
High-efficiency spur gearing for
greater lift with minimum effort
Rugged Hoistaloy chain for
added strength and durability
Fully machined, forged liftwheel
pockets for easier lifting and
smooth free chaining
High-strength aluminum alloy
castings in frame and covers
Inspected over 75 times to meet
or exceed HMI and ASME/ANSI
performance and safety
standards
Standard hand chain drop is 2
feet less than lift, (example 8
foot lift hoist has 6 foot hand
chain drop)
Lifetime warranty
Metric rated
Made in U.S.A.
$
1,551.00
Qty:
Part #:841-545-10-025
- Power Drive Dead Blow Hammers, 2 lb Head, Yellow
Nupla® Power Drive® Dead Blow HammersProduct DetailsEngineered to perform better than rubber or plastic face hammersHammer faces are abrasion- and impact-resistantDesigned to withstand severe striking applications and are surface protective
Qty:
Part #:841-545-21-016
- Classic Ball Pein Hammer, Fiberglass Handle, 13 in, Carbon Steel 16 oz Head
Nupla® Classic Ball Pein HammersProduct DetailsDrop forged, heat treated carbon steel headSuper strong Classic Nuplaglas® handleCompatible in all weather environmentsChemical and insect-resistantErgonomic non-slip grip
Qty:
Part #:841-545-21-024
- Classic Ball Pein Hammer, Fiberglass Handle, 14 in, Carbon Steel 24 oz Head
Nupla® Classic Ball Pein HammersProduct DetailsDrop forged, heat treated carbon steel headSuper strong Classic Nuplaglas® handleCompatible in all weather environmentsChemical and insect-resistantErgonomic non-slip grip
Qty:
Part #:841-545-28-025
- Nupla Hand Drilling Hammers, 2 lb, Classic Fiberglass Handle, SG Grip
Specifications
Big Catalog Page#
20121286
Brand
NUPLA
Color
Yellow
Country of Origin
IN
Grip Style
SG
Handle Length [Nom]
10 in
Handle Material
Fiberglass
Handle Type
Classic
Hazmat
NO
Head Weight
2 lb
MPI Catalog Page#
2018445
Prop 65
YES
Special Order
YES
UNSPSC
27111602
Wt.
2.25 lb
Qty:
Part #:841-175-2214A
- SERIES 622
MODEL 622-A
1/2 TO 5 TON CAPACITIES
STANDARD LIFTS UP TO 30 FT.
HAND CHAIN HOIST. The CM Series 622 hand chain hoist features
a simple, efficient and economical design. With an ultra-low-headroom profile and lightweight steel construction, the CM 622 is easy to install, even in confined spaces. Redesigned for optimal performance, this hoist requires even less pull force for operation and has larger hook throat openings for easier attachment.
$
899.99
Qty:
Part #:841-175-2234A
- SERIES 622
MODEL 622-A
1/2 TO 5 TON CAPACITIES
STANDARD LIFTS UP TO 30 FT.
HAND CHAIN HOIST. The CM Series 622 hand chain hoist features
a simple, efficient and economical design. With an ultra-low-headroom profile and lightweight steel construction, the CM 622 is easy to install, even in confined spaces. Redesigned for optimal performance, this hoist requires even less pull force for operation and has larger hook throat openings for easier attachment.
$
1,882.00
Qty:
Displaying: 1 - 24 of 37 Matching Items