Columbus Mckinnon Corporation
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Brand: Columbus Mckinnon Corporation Curv-O-Mark Felo Wiha
$
17.31
Qty:
$
6.97
Qty:
Part #:841-175-09001W
- Ideal as a semi-permanent lifting point
for rigging operations (vertical or
horizontal), as a hoisting anchor,
or as a tool for positioning and holding
beams for welding. The Beam Clamp
is recommended for commercial,
construction and industrial applications. SPECIFICATIONS
2,000 to 20,000 lb. CAPACITIES
I-BEAM WIDTHS FROM 3 to 12.2 in.
$
153.00
Qty:
Part #:841-175-09004W
- Ideal as a semi-permanent lifting point
for rigging operations (vertical or
horizontal), as a hoisting anchor,
or as a tool for positioning and holding
beams for welding. The Beam Clamp
is recommended for commercial,
construction and industrial applications. SPECIFICATIONS
2,000 to 20,000 lb. CAPACITIES
I-BEAM WIDTHS FROM 3 to 12.2 in.
$
333.00
Qty:
Part #:841-175-2262
- SERIES 622
MODEL 622-A
1/2 TO 5 TON CAPACITIES
STANDARD LIFTS UP TO 30 FT.
HAND CHAIN HOIST. The CM Series 622 hand chain hoist features
a simple, efficient and economical design. With an ultra-low-headroom profile and lightweight steel construction, the CM 622 is easy to install, even in confined spaces. Redesigned for optimal performance, this hoist requires even less pull force for operation and has larger hook throat openings for easier attachment.
$
434.00
Qty:
$
1,441.75
Qty:
$
1,713.25
Qty:
$
1,962.50
Qty:
$
33.25
Qty:
Part #:841-175-4621
- Cyclone hand chain hoist. Most interchangeability of parts
in the industry
Standard Load Limiter for
simple, automatic overload
protection
Enclosed contoured Westontype
automatic brake for
positive load control
High-efficiency spur gearing for
greater lift with minimum effort
Rugged Hoistaloy chain for
added strength and durability
Fully machined, forged liftwheel
pockets for easier lifting and
smooth free chaining
High-strength aluminum alloy
castings in frame and covers
Inspected over 75 times to meet
or exceed HMI and ASME/ANSI
performance and safety
standards
Standard hand chain drop is 2
feet less than lift, (example 8
foot lift hoist has 6 foot hand
chain drop)
Lifetime warranty
Metric rated
Made in U.S.A.
$
1,551.00
Qty:
Part #:841-430-14775
- Centering Heads, 1/2 in-4in Pipe Cap., Standard
Contour® Centering HeadsProduct DetailsEffective tool for setting centerlines, establishing angles and marks for butt-ins or locating points inside pipes and tanksHead is fitted with an adjustable dial bubble protractor and hardened centering pinUseful for laying out keyways and measuring declivity
Qty:
Part #:841-817-76395
- Wiha® Tools Wiha® Tools Torx® Bit Socket SetsIncludesMolded Rail
$
54.26
Qty:
Part #:841-817-26391
- UPC 084705263915
Wiha® Tools Precision Tool SetsProduct DetailsExact fit precision machined tipsVapor hard chromed satin non slip tipsThrough hardened for maximum durabilityAll handles are molded onto bladesSpin free finger control caps
$
45.22
SET
Qty:
Part #:841-817-33490
- Country of Origin GERMANY/ HAZMAT Item NO/ Special Order Item YES:
$
91.53
SET
Qty:
Part #:841-116-52815
- Felo 52815, Torx T15 Ergonic Screwdriver
Felo 52815 Ergonic Torx Screwdriver with Impact Proof Handle. Size T15 Shaft Length 4 inches
Qty:
$
6.89
Qty:
Part #:841-430-14776
- #7 Jumbo Centering Head
Aids in the setting of center lines, establishing angles, and marks for butt-ins, locating points inside pipes and tanks, laying out keyways and measuring declivity. Jumbo centering head is ideal for 1" pipe diameter and up and has an 8" Y-type head and a DSL. A spring loaded hardened centering pin eliminates the need for a hammer.
Qty:
Part #:841-430-14796
- #33 Universal Level
The Curv-O-Mark Universal Level (#33) is a must have multipurpose tool.Featuring a 360-degree adjustable protractor dial bubble (DSL,) the level has two cast-in 25-pound magnets to securely hold the unit in place on any steel surface including the underside of a pipe or beam.This permits hands free leveling, even in the tight spots.The bubble is mounted on a protractor dial, so it can be used in any position and still maintain accurate readings.Both faces of the level have deep, cast-in grooves for self-centering on the contour of the pipe and because the magnets are cast-in, they won&rsquot interfere with the use of the level on nonmagnetic materials. For aligning pipe flanges (two holing,) the universal level comes with a two threaded, self-aligning conical spacer and conical nut and bolt units.
Qty:
Part #:841-175-0210
- SERIES 602
MINI RATCHET LEVER HOISTS The CM Series 602 and Series 603 mini ratchet lever hoists
are the most compact ratchet lever hoists on the market. With
capacities up to 1,100 pounds, these lightweight and portable
hoists operate just like larger lever hoists. The Series 602 and
603 can easily fit in a tool box, allowing you to carry these
handy hoists to and from jobs.
Qty:
$
34.25
Qty:
$
34.25
Qty:
$
33.25
Qty:
Part #:841-175-5310A
- Series 653 Ratchet Lever Hoist THE ADVANTAGES OF THE SHORTER HANDLE
As part of our commitment to bring best-in-class products to market, we are always innovating and improving on existing CM products. Our popular CM Series 653 ratchet lever hoist has been redesigned to be lighter and more compact for ease of use and even lower headroom applications. With a shorter handle length and optimized weight, the CM Series 653-A 3/4 and 1-1/2 ton models are among the easiest hoists to operate, outmatching competitors in usability and reliability.
$
415.00
Qty:
Part #:841-175-0216
- SERIES 603
MINI RATCHET LEVER HOISTS The CM Series 602 and Series 603 mini ratchet lever hoists
are the most compact ratchet lever hoists on the market. With
capacities up to 1,100 pounds, these lightweight and portable
hoists operate just like larger lever hoists. The Series 602 and
603 can easily fit in a tool box, allowing you to carry these
handy hoists to and from jobs.
Qty:
Displaying: 1 - 24 of 24 Matching Items