Columbus Mckinnon
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Manufacturer: Columbus Mckinnon Milwaukee Electric Tool
- Size: 1in 2-3/8in 5in 9/64in
Part #:288220
- M18 FUEL&trade 4-1/2" / 5" Braking Grinder (Tool Only)
The world's first cordless braking grinder stops accessories in under 2 seconds, delivers the power of a corded grinder, and has up to 10X longer tool life. The M18 FUEL&trade 4-1/2" / 5" Grinder supplies maximum sustained power to complete the toughest grinding, surface preparation and cutting applications. The POWERSTATE&trade Brushless Motor provides up to 10X longer motor life and lower cost of ownership. The M18&trade REDLITHIUM&trade XC5.0 Battery Pack delivers up to 4X more run time and 20% more power. The grinder features REDLINK PLUS&trade Intelligence, the most advanced system of cordless power tool electronics, for maximum performance. A Rapid Stop Brake feature stops accessories in under 2 seconds. The 18-volt lithium-ion grinder&rsquos thin body design gives it optimized balance to rest easily in your hands. Tool-free accessory changes using the FIXTEC nut and guard adjustments mean less downtime during work. The grinder is built with the same tool body, gearing system and anti-vibration side handle as Milwaukee&rsquos legendary high-performance corded grinders for maximum durability on the job. The kit includes 2 M18&trade REDLITHIUM&trade XC5.0 Extended Capacity Battery Packs, a multi-voltage charger and carrying case. Grinding wheel sold separately.
Qty:
Part #:729-2882-22
- M18 FUEL&trade 4-1/2" / 5" Braking Grinder w/ ONE-KEY&trade Paddle Switch, No Lock
Our M18 FUEL&trade 4-1/2" / 5" Braking Grinder with ONE-KEY&trade Paddle Switch, No Lock Kit is the next advancement in power and performance of cordless grinders while enhancing safety with its RAPIDSTOP&trade Brake. The M18 FUEL&trade 4-1/2" / 5" Braking Grinder with ONE-KEY&trade generates 11A corded power to complete the toughest grinding and cutting applications. The POWERSTATE&trade Brushless Motor delivers maximum sustained power and 8,500 RPM to remove material faster and increase productivity. REDLINK PLUS&trade Intelligence ensures unmatched levels of performance, protection, and compatibility. The RAPIDSTOP&trade Brake provides stop times under 2 seconds with an abrasive disc. Our M18 FUEL&trade 4-1/2" / 5" Braking Grinder with ONE-KEY&trade includes an electronic clutch for kickback protection, as well as overload protection to maximize motor life. Compatible with ONE-KEY&trade, this grinder wirelessly connects to a smartphone to track and manage the tool, providing you with visibility to where tools are across your network of jobs. The included M18&trade REDLITHIUM&trade HIGH OUTPUT&trade XC6.0 Batteries deliver 50% more power while running 50% cooler than the M18&trade REDLITHIUM&trade XC Batteries. Experience faster accessory changes, and less downtime with tool-free accessory and guard adjustments, while remaining fully compatible with the most common accessories in the market. The MILWAUKEE® M18 FUEL&trade 4-1/2" / 5" Braking Grinder with ONE-KEY&trade is the next level of jobsite productivity and enhanced safety in cordless grinders.
Qty:
Part #:729-48-62-2030
- SPL/RDHEX Demo 1" x 18" Flat Chisel
Milwaukee® Spline or Round/Hex Standard Chisels are made of drop forged high grade steel. These chisels are specifically designed for spline rotary hammers and should be used in hammer only mode.
Qty:
Part #:729-6117-33D
- 13 Amp 5" Small Angle Grinder Slide, Lock-On
The 13 Amp 5" Small Angle Grinder (Slide, Lock-On) delivers up to 30% more durability and power than the competition. With a 2,100 MWO motor that powers through the toughest jobs, the 6117-33 is the perfect match for industrial users. Milwaukee's Electronic Advantage includes Overload Protection to maximize motor life, an Electronic Clutch that extends tool life and helps prevent bind-up, Line Lock-Out that prevents automatic start-up after power loss, and Soft Start. Constant Power Technology® enables the grinder to maintain speed under load for unmatched performance and productivity. Featuring a 100% tool-free design, this Grinder allows the user to change all accessories, including hubbed product, without a wrench. In addition, the tool-free, burst resistant, adjustable guard allows users to make quick guard installations and adjustments.
Qty:
Part #:729-49-59-2100
- 1" x 2" Annular Cutter
Dual alternating tooth geometry and thin-wall construction help Milwaukee&rsquos Annular Cutter cut up to 15% faster than the competition. With 20% thinner walls, the cutter displaces less material for the same size hole, giving you fast, burr-free holes in anything from sheet metal to thick steel plate.Milwaukee&rsquos proprietary high-speed steel with three hardness zones minimizes breakage and helps the bit last longer. It comes with a 3/4&rdquo Weldon shank, which is ideal for use with most small magnetic drill presses and large magnetic drill presses with the correct arbor.
Qty:
Part #:729-2867-20
- M18 FUEL&trade 1" High Torque Impact Wrench w/ ONE-KEY&trade
Our M18 FUEL&trade 1" High Torque Impact Wrench w/ ONE-KEY&trade is the world&rsquos first cordless 1&rdquo High Torque Impact Wrench. The POWERSTATE&tradeBrushless Motor delivers up to 1,800 ft-lbs of Nut-Busting Torque and 1,500 ft-lbs of fastening torque, making this the most powerful cordless impact wrench and enabling you to complete the most demanding applications. At only 12.9lbs with battery, the tool is up to 7 lbs. lighter than corded units, providing you with less fatigue while making overhead applications easier to complete on the job site. The battery-powered impact wrench provides you with cordless convenience and eliminates your need for compressors, generators, cords, and hoses. This reduces your cost of ownership by lowering energy costs and eliminating routine maintenance on compressors and generators. With no cord or hose, you have greater portability and the ability to complete applications you were not able to do with a corded or pneumatic unit. The REDLINK PLUS&trade Intelligence ensures you achieve maximum performance and protects your High Torque Impact Wrench against overloads, over-heating, and over-discharge. M18&trade REDLITHIUM&trade Battery Packs are compatible with all M18&trade tools, providing you with more work per charge and more work over the life of the pack. The 4-Mode DRIVE CONTROL&trade provides you with greater control over the output speed and power of the powerful High Torque impact wrench . The ONE-KEY&trade capabilities provide you with the ability to Customize, Track and Manage the impact wrench. ONE-KEY&trade technology also gives you the ability to set a repeatable torque output for maximum control.
Qty:
Part #:512196
- M18 FUEL&trade 1" High Torque Impact Wrench w/ ONE-KEY&trade Kit
Qty:
Part #:729-2868-22HD
- AX Item Number 286822HD. Country of Origin VNM. Harmonized Tariff 8467290040:
Qty:
Part #:288020
- AX Item Number 288020. Country of Origin VNM. Harmonized Tariff 8467290010:
Qty:
Part #:729-77-003
- Country of Origin CHN:
Qty:
Part #:729-6117-30
- Country of Origin CHN:
Qty:
Part #:511665
- 9/64" Thunderbolt® Black Oxide Drill Bit
Qty:
Part #:729-49-57-2370
- 2-3/8" Threaded Steel Hawg® Cutter
Drill holes up to 3X faster than twist drill bits with the Milwaukee® 3/4-inch Threaded Steel Hawg® Cutter. This long-lasting cutter features carbide teeth and an alternating cutting pattern to cut up to a 2" hole depth in steel, stainless steel, cast iron or aluminum. The spring-loaded, self-ejecting pin lets you make smoother, more accurate cuts and eject the plug faster.The Steel Hawg Cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0030 for Milwaukee's 4262-1 magnetic drill press or arbor 49-57-0010 for Milwaukee's 4292-1 mag press. The 3/4" bit diameter has a metric thread size of M18 x 1.5" shank. Use the Threaded Steel Hawg with a No. 3 Morse Taper Arbor Assembly 49-57-0010.
Qty:
Part #:729-6124-31
- 13 Amp 5" Small Angle Grinder Trigger Grip, No-Lock (Replaces 6121-31)
The 13 Amp 5" Small Angle Grinder (Trigger Grip, No-Lock) delivers up to 30% more durability and power than the competition. With a 2,100 MWO motor that powers through the toughest jobs, the 6124-31 is the perfect match for industrial users. Milwaukee's Electronic Advantage includes Overload Protection to maximize motor life, an Electronic Clutch that extends tool life and helps prevent bind-up, Line Lock-Out that prevents automatic start-up after power loss, and Soft Start. Constant Power Technology® enables the grinder to maintain speed under load for unmatched performance and productivity. Featuring a 100% tool-free design, this Grinder allows the user to change all accessories, including hubbed product, without a wrench. In addition, the tool-free, burst resistant, adjustable guard allows users to make quick guard installations and adjustments.
Share This
Qty:
Part #:729-5262-21
- 1" SDS Plus Rotary Hammer Kit
Get up to 40% faster drilling and 15% more life, even in the toughest applications. Designed for the toughest applications, the 1&rdquo SDS-Plus D-Handle Rotary Hammer lasts longer and drills faster than other tools in its class. With a powerful 8-amp motor, it delivers 0-1,620 RPM, 0-5,860 BPM and 2.1 ft-lbs of torque. You&rsquoll get superior drilling speed without sacrificing the power needed to drill larger holes. At just 6.1 pounds, this rotary hammer is easy to use and helps avoid user fatigue. A mechanical clutch protects the motor when the bit binds, and three-mode operation offers maximum versatility. The kit includes a side handle, depth rod and carrying case.
Qty:
Part #:729-48-17-3010
- 1" Diamond Premium Wet Core bit
MILWAUKEE® Diamond Premium Wet Core Bits are designed to the highest standards, only using quality diamonds. Available in sizes 3/4" - 14", Diamond Premium Wet Core bits offer exceptional drilling life and speed in cured concrete with hard aggregate and medium steel reinforcement. Designed with threaded cap for easily extending the core bit. This bit is 15" in length and contains a 5/8"-11 thread.
Qty:
Qty:
Part #:729-2868-20
- Country of Origin VNM:
Qty:
Qty:
Part #:288620
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Metal Working. Product Level 3 TOL Grinders. Product Level 4 TOL SAGs. Product Level 5 TOL FUEL. AX Item Number 288620. Country of Origin VNM. Harmonized Tariff 8467290010.:
Qty:
Part #:288720
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Metal Working. Product Level 3 TOL Grinders. Product Level 4 TOL SAGs. Product Level 5 TOL FUEL. AX Item Number 288720. Country of Origin VNM. Harmonized Tariff 8467290010.:
Qty:
Part #:288920
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Metal Working. Product Level 3 TOL Grinders. Product Level 4 TOL SAGs. Product Level 5 TOL FUEL. AX Item Number 288920. Country of Origin VNM. Harmonized Tariff 8467290010.:
Qty:
Part #:288820
- M18 FUEL&trade 4-1/2" / 5" Variable Speed Braking Grinder, Paddle Switch No-Lock
Our M18 FUEL&trade 4-1/2" / 5" Variable Speed Braking Angle Grinder, Paddle Switch No-Lock is the newest addition to Milwaukee's battery-powered grinder lineup, generating 11A Corded Power, 5 Speed for Increased Control, and RAPIDSTOP&trade Brake for Enhanced Safety. The POWERSTATE&trade Brushless Motor delivers 3,500- 8,500 RPM and maximum sustained power to complete the toughest grinding and cutting applications, allowing you to push your cordless angle grinders harder and longer than ever before. REDLINK PLUS&trade Intelligence ensures unmated levels of performance, protection, and compatibility. The M18&trade REDLITHIUM&trade HIGH OUTPUT&trade XC6.0 Batteries (not included) deliver 50% more power while running 50% cooler than our M18&trade REDLITHIUM&trade XC Batteries. The Variable Speed dial provides 5-speed settings between 3,500 RPM and 8,500 RPM allowing for greater control in more applications. With tool-free accessory and guard adjustments, users will experience faster accessory changes and less downtime. The MILWAUKEE® M18 FUEL&trade 4-1/2" / 5" Variable Speed Angle Grinder takes cordless tools to the next level in performance, run-time, and application versatility.
Qty:
Displaying: 1 - 23 of 23 Matching Items