Combihammer
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Power Tools: Combihammer Dust Extractor Filters Hex Driver Bits and Accessories Thread Rod Cutter
Part #:508585
- Applications; Drilling anchor, rebar and through holes in concrete and masonry – possible diameter range 4-28 mm, recommended diameter range 10-20 mm. Chiselling in brick and block, corrective chiseling and surface finishing on concrete. Driving anchor screws and concrete screw anchors. Drilling in wood and metal using the optional quick-release chuck and drill bits with smooth shank up to 13 mm diameter.:
$
1,134.06
Qty:
Part #:729-48-32-5031
- SHOCKWAVE&trade 1/4" Hex to 3/8" Square Socket Adapter
Our MILWAUKEE® SHOCKWAVE&trade Square Socket Adapter transforms impact socket wrenches into impact drivers with square hex bits for every application. Our Milwaukee Impact Duty&trade socket adapters are made from a proprietary steel, heat treated to control hardness and provide durability with up to 50X life. Our socket adapter has a heavy-duty construction for fastening capabilities in all impact drivers, built to withstand frequent use. Milwaukee hex to square socket adapters are engineered for maximum durability and long-lasting use. This impact sockets adapter is designed for use with impact drivers.
Qty:
Part #:729-48-32-5731
- SHOCKWAVE&trade 1/4" Hex to 3/8" Square Socket Adapter
Our MILWAUKEE® SHOCKWAVE&trade Square Socket Adapter transforms impact socket wrenches into impact drivers with square hex bits for every application. Our Milwaukee Impact Duty&trade socket adapters are made from a proprietary steel, heat treated to control hardness and provide durability with up to 50X life. Our socket adapter has a heavy-duty construction for fastening capabilities in all impact drivers, built to withstand frequent use. Milwaukee hex to square socket adapters are engineered for maximum durability and long-lasting use. This impact sockets adapter is designed for use with impact drivers.
Qty:
Part #:729-48-32-5730
- SHOCKWAVE&trade 1/4" Hex to 1/4" Square Socket Adapter
Our MILWAUKEE® SHOCKWAVE&trade Square Socket Adapter transforms impact socket wrenches into impact drivers with square hex bits for every application. Our Milwaukee Impact Duty&trade socket adapters are made from a proprietary steel, heat treated to control hardness and provide durability with up to 50X life. Our socket adapter has a heavy-duty construction for fastening capabilities in all impact drivers, built to withstand frequent use. Milwaukee hex to square socket adapters are engineered for maximum durability and long-lasting use. This impact sockets adapter is designed for use with impact drivers.
Qty:
Part #:506981
- SHOCKWAVE&trade 1/4" HEX SHANK TO 1/4" SOCKET Adapter
Our MILWAUKEE® SHOCKWAVE&trade Square Socket Adapter transforms impact socket wrenches into impact drivers with square hex bits for every application. Our Milwaukee Impact Duty&trade socket adapters are made from a proprietary steel, heat treated to control hardness and provide durability with up to 50X life. Our socket adapter has a heavy-duty construction for fastening capabilities in all impact drivers, built to withstand frequent use. Milwaukee hex to square socket adapters are engineered for maximum durability and long-lasting use. This impact sockets adapter is designed for use with impact drivers.
Qty:
Part #:729-2872-20
- M18&trade Brushless Threaded Rod Cutter
Our M18&trade Brushless Threaded Rod Cutter is Milwaukee's dedicated solution for cutting the most common threaded rod sizes on the job site, including coarse 1/4", 3/8" and 1/2" mild steel to 1/4" and 3/8" stainless steel. The cordless threaded rod cutter is powered by a brushless motor and delivers 400+ cuts while powered by an M18&trade REDLITHIUM&trade 2.0Ah Battery. The four-sided cutting dies allow you to cut multiple sizes of threaded rod on one tool by simply rotating the dies. The all thread cutter has the clearest line of sight and delivers clean, burr-free cuts enabling you to thread a nut on by hand without having to file down the ends. The rod cutter features optimized blade geometry and cut speed to prevent chips and sparks while cutting. It has auto jaw opening allowing you to perform fast, repetitive cuts while a reverse button helps prevent unintended cuts. Its centered grip provides the best balance for one-handed overhead trims, while the flat horizontal design provides you with a stable surface for benchtop cuts.
Qty:
Part #:729-2872-21
- M18&trade Brushless Threaded Rod Cutter Kit
Our M18&trade Brushless Threaded Rod Cutter Kit is Milwaukee's dedicated solution for cutting the most common threaded rod sizes on the job site, including coarse 1/4", 3/8" and 1/2" mild steel to 1/4" and 3/8" stainless steel. The cordless threaded rod cutter is powered by a brushless motor and delivers 400+ cuts while powered by an M18&trade REDLITHIUM&trade 2.0Ah Battery. The four-sided cutting dies allow you to cut multiple sizes of threaded rod on one tool by simply rotating the dies. The all thread cutter has the clearest line of sight and delivers clean, burr-free cuts enabling you to thread a nut on by hand without having to file down the ends. The rod cutter features optimized blade geometry and cut speed to prevent chips and sparks while cutting. It has auto jaw opening allowing you to perform fast, repetitive cuts while a reverse button helps prevent unintended cuts. Its centered grip provides the best balance for one-handed overhead trims, while the flat horizontal design provides you with a stable surface for benchtop cuts. The Milwaukee Threaded Rod Cutter kit includes one M18&trade REDLITHIUM&trade 2.0Ah Battery, a multi-voltage charger, and a carrying case.
Qty:
Part #:729-48-32-5034
- AX Item Number 48325034. Country of Origin TWN. Harmonized Tariff 8207906000:
Qty:
Part #:729-2715-DE
- M18&trade HAMMERVAC&trade Dedicated Dust Extractor
Milwaukee® HAMMERVAC&trade Dedicated Dust Extractor (2715-DE) features an inline dedicated design engineered to connect directly to and be power by the M18&trade 1-1/8&rdquo SDS Plus Rotary Hammer (2715-22). This design allows for a very compact HAMMERVAC&trade and rotary hammer combination to fit in the most confined work spaces. Utilizing the same replaceable certified HEPA filter as other HAMMERVACS&trade, which filter 99.97% of all particles greater than 0.3µm, means more compatibility on the jobsite. For accurate hole depths, this product is built with an adjustable depth stop and ruler for easy and precise adjustments. Featuring a high capacity dust box, users can now work longer without emptying dust box as often.
Qty:
Qty:
Displaying: 1 - 10 of 10 Matching Items