Air Compressor
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Power Tools: Air Compressor Concrete Vibrator Flood Light Multi-Tool Right Angle Grinder Thread Rod Cutter Tool Storage Torque Wrench
Part #:805467
- M18 FUEL&trade 1/2" High Torque Impact Wrench w/ Friction Ring
Our M18 FUEL&trade ½&rdquo High Torque Impact Wrench w/ Friction Ring is the most power-dense impact wrench in its class, provides greater access in tight spaces, and maximizes productivity through faster removal speeds. The POWERSTATE&trade Brushless Motor delivers up to 1,200 ft-lbs of Fastening Torque and 1,600 ft-lbs of Nut-Busting Torque when paired with our M18&trade REDLITHIUM&trade FORGE&trade Batteries, while the compact size at 7.6" in length gives users greater access in tight spaces. The M18 FUEL&trade ½&rdquo High Torque Impact Wrench w/ Friction Ring maximizes productivity on the jobsite and in the shop by removing stubborn bolts and fasteners faster than cordless competitors. Our patented battery isolation system provides a secure battery connection and controls vibration transmitted to the pack. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL&trade offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF&trade control applies no more than 50 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control that delivers our users full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. The ½&rdquo Friction Ring design allows for quick & tool-free socket changes.
Qty:
Part #:276722
- M18 FUEL&trade High Torque ½&rdquo Impact Wrench with Friction Ring Kit (Replaces 2767-22 & 2767-22R)
Our M18 FUEL&trade 1/2" High Torque Impact Wrench with Friction Ring eliminates the need to use a pneumatic tool for those stubborn and rusted bolts by delivering 1,000 ft-lbs of fastening torque and 1400 ft-lbs of nut-busting torque. With 2X faster removal speed, our users will be able to get the job done faster and be more productive throughout their day. By providing the industry&rsquos most compact cordless High Torque Impact Wrench at 8.39&rdquo in length, this tool allows for more access in tight spaces. 4-Mode DRIVE CONTROL&trade with Bolt Removal mode gives our users the most control over their fasteners. Bolt Removal mode gives the user more control when removing fasteners by slowing to 750rpm once the fastener has been busted loose. Our tool offers quick, tool-free socket changes with a 1/2 in. friction ring anvil. A premium rubber overmold material gives our users ultimate comfort during prolonged use while lasting longer against corrosive materials. Our M18 REDLITHIUM&trade XC5.0 Extended Capacity Resistant Battery Packs included provide increased protection against oils, greases, and solvents.
Qty:
closeout
$309.00 MSRP
$
219.75
Part #:514777
- CLOSEOUTS Only 1 Left!
- M12&trade Cordless LITHIUM-ION Multi-Tool Kit (Discontinued, Being Replaced by Tool Only 2426-20)
The Milwaukee® M12&trade Cordless LITHIUM-ION Multi-Tool Kit offers versatility, power and control to complete problematic jobsite applications. Ideal for remodelers, flooring contractors, maintenance repair technicians and electricians, the cordless Multi-Tool cuts, grinds, sands and scrapes at odd angles and in areas difficult to work. It&rsquos powered by the M12&trade REDLITHIUM Battery to deliver up to 25% more runtime than the competition. Use it to make flush or plunge cuts, remove grout, sand and tackle other awkward jobs. The M12 Multi-Tool operates from 5,000 to 20,000 OPM and allows users to match the speed to the application. The all-metal gear case provides high durability, while the over-molded, ergonomic handle offers extra control. With the universal adapter (included), the Multi-Tool is compatible with most competitor accessories for even greater versatility. The kit includes 2 M12 REDLITHIUM battery packs and a charger, 5 assorted sanding sheets, sanding pad, wood cutting blade and contractor bag.
Qty:
Part #:729-2361-20
- M18&trade ROVER&trade Flood Light (Tool-Only)
Powered by M18 batteries, the Milwaukee 2361-20 M18 LED Flood Light provides best in class light output, functionality and durability. Using 8 high quality LEDs, the flood light provides up to 1,300 lumens. A compact and lightweight roll cage design and replaceable, impact resistant lens ensure the light can stand up to the toughest working conditions. The octagonal shape allows the light to be used at multiple angles while the multiple hanging features provide hands free use. The Milwaukee M18 LED Flood Light carries a limited lifetime LED warranty.
Qty:
Part #:514778
- M18&trade Cordless Multi-Tool (Tool Only)
The Milwaukee® M18&trade Cordless Multi-Tool cuts up to 50% faster and delivers up to 2X more cuts per charge than the competitors. With best-in-class speed and performance, the cordless Multi-Tool offers the versatility to complete problematic jobsite applications. Ideal for remodelers, flooring contractors, maintenance repair technicians and electricians, the cordless Multi-Tool cuts, grinds, sands and scrapes at odd angles and in areas difficult to
Qty:
Part #:729-2872-20
- M18&trade Brushless Threaded Rod Cutter
Our M18&trade Brushless Threaded Rod Cutter is Milwaukee's dedicated solution for cutting the most common threaded rod sizes on the job site, including coarse 1/4", 3/8" and 1/2" mild steel to 1/4" and 3/8" stainless steel. The cordless threaded rod cutter is powered by a brushless motor and delivers 400+ cuts while powered by an M18&trade REDLITHIUM&trade 2.0Ah Battery. The four-sided cutting dies allow you to cut multiple sizes of threaded rod on one tool by simply rotating the dies. The all thread cutter has the clearest line of sight and delivers clean, burr-free cuts enabling you to thread a nut on by hand without having to file down the ends. The rod cutter features optimized blade geometry and cut speed to prevent chips and sparks while cutting. It has auto jaw opening allowing you to perform fast, repetitive cuts while a reverse button helps prevent unintended cuts. Its centered grip provides the best balance for one-handed overhead trims, while the flat horizontal design provides you with a stable surface for benchtop cuts.
Qty:
Part #:729-2872-21
- M18&trade Brushless Threaded Rod Cutter Kit
Our M18&trade Brushless Threaded Rod Cutter Kit is Milwaukee's dedicated solution for cutting the most common threaded rod sizes on the job site, including coarse 1/4", 3/8" and 1/2" mild steel to 1/4" and 3/8" stainless steel. The cordless threaded rod cutter is powered by a brushless motor and delivers 400+ cuts while powered by an M18&trade REDLITHIUM&trade 2.0Ah Battery. The four-sided cutting dies allow you to cut multiple sizes of threaded rod on one tool by simply rotating the dies. The all thread cutter has the clearest line of sight and delivers clean, burr-free cuts enabling you to thread a nut on by hand without having to file down the ends. The rod cutter features optimized blade geometry and cut speed to prevent chips and sparks while cutting. It has auto jaw opening allowing you to perform fast, repetitive cuts while a reverse button helps prevent unintended cuts. Its centered grip provides the best balance for one-handed overhead trims, while the flat horizontal design provides you with a stable surface for benchtop cuts. The Milwaukee Threaded Rod Cutter kit includes one M18&trade REDLITHIUM&trade 2.0Ah Battery, a multi-voltage charger, and a carrying case.
Qty:
Qty:
Qty:
Qty:
Part #:729-2365-20
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Lighting. Product Level 3 TOL System. Product Level 4 TOL Flood Lights. AX Item Number 236520. Country of Origin CHN. Harmonized Tariff 8513104000.:
Qty:
Part #:729-48-22-8250
- Jobsite Cooler
Milwaukee Tool&rsquos jobsite cooler is specifically designed to be durable enough to withstand tough jobsite conditions. The cooler utilizes double insulation and a food-grade leak proof liner to keep ice cold for 24 hours without leaking. Additionally, Milwaukee constructed the cooler with 1680D ballistic material base and heavy duty metal zippers for a longer life. A tape measure clip with a bottle opener provides ultimate versatility. Lastly, Milwaukee implemented a tech pocket and dry storage compartment to make this cooler a versatile jobsite storage solution.
Qty:
Part #:729-2840-20
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Nailers. Product Level 3 TOL Compressors. Product Level 4 TOL Compressors. Product Level 5 TOL FUEL. AX Item Number 284020. Country of Origin MEX. Harmonized Tariff 8414801685.:
Qty:
Part #:729-3485-20
- Business Unit Tools. Product Level 1 Tools M12. Product Level 2 Tools Metal Working. Product Level 3 TOL Die Grinders. Product Level 4 TOL R.A. Die Grinders. Product Level 5 TOL FUEL. AX Item Number 248520. Country of Origin MEX. Harmonized Tariff 8467290010.:
Qty:
Part #:729-2526-21XC
- Business Unit Tools. Product Level 1 Tools M12. Product Level 2 Tools Cutting. Product Level 3 TOL Multi-Tools. Product Level 4 TOL Multi-Tools. Product Level 5 TOL FUEL. AX Item Number 252621XC. Country of Origin VNM. Harmonized Tariff 8467290090.:
Qty:
Qty:
Part #:729-2966-20
- M18 FUEL&trade 1/2" High Torque Impact Wrench w/ Pin Detent
Our M18 FUEL&trade ½&rdquo High Torque Impact Wrench w/ Pin Detent delivers up to 900 ft-lbs of fastening torque, greater access in tight spaces, and greater durability. The POWERSTATE&trade Brushless Motor delivers up to 900 ft-lbs of Fastening Torque and 1,100 ft-lbs of Nut-Busting Torque, providing users with greater power for the most demanding applications. At 7.3&rdquo in length, the compact size gives users greater access in tight spaces. The robust design allows users to tackle the most demanding applications on the jobsite all while prolonging tool performance. Our patented battery isolation system ensures a secure battery connection and controls vibration transmitted to the pack. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. The integrated lanyard loop allows users to easily transfer and store the tool. 4-Mode DRIVE CONTROL&trade offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF&trade control applies no more than 50 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control that delivers our users full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. The ½&rdquo Pin Detent anvil design maximizes socket retention.
Qty:
Qty:
Part #:236820
- M18&trade ROVER&trade Dual Power Triple-Panel Flood & Area Light
Our M18&trade ROVER&trade Dual Power Triple-Panel Flood & Area Light delivers a high-performing 4,500L OF FLOOD AND AREA LIGHTING and the most COMPACT PORTABILITY in its class. The light has three folding panels that provide optimal lighting coverage, offering various brightness modes and individual light head power options for any jobsite need. With a versatile base featuring a hook, magnet, and keyholes, you can effortlessly mount this light overhead in any jobsite environment. The M18&trade ROVER&trade Dual Power Triple-Panel Flood & Area Light delivers 4,500 lumens of TRUEVIEW&trade High-Definition Output for 3 hours of runtime on high mode with an M18&trade XC5.0 battery pack. On its lowest brightness setting, the light provides up to 30 hours of runtime with an M18&trade XC5.0 battery pack. It also is equipped with an AC port for all-day runtime capability. Designed with the jobsite in mind, this light is IP54 rated, can withstand up to a 9 ft. drop, and is backed with a 5 Year Tool and a limited lifetime LED Warranty. MILWAUKEE® ROVER&trade Flood Lights are built to go anywhere and withstand anything.
Qty:
Displaying: 1 - 19 of 19 Matching Items