Concrete Vibrator
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Power Tools: Concrete Vibrator Hex Impact Driver Hoist Inflator Jigsaw Power Tool Accessory Radio Shear Site Light
Part #:729-49-16-2767
- M18 Htiw 2767/2863 Protective Boot
For use with Milwaukee M18 FUEL&trade High Torque Impact Wrenches, Models 2762-20, 2763-20, and 2764-20 only. Not for use on or near live electrical circuits. Use on any other product may result in damage to tool motor and may void tool warranty.
Qty:
Part #:729-2792-20
- M18&trade Jobsite Radio/Charger
The Milwaukee® M18&trade Jobsite Radio/Charger is the first charging radio to bring the power of Bluetooth® to the jobsite, while delivering the industry's best reception and sound. The most advanced radio of its kind, the M18&trade Jobsite Radio/Charger features a Bluetooth® receiver so you can stream rich, full sound wirelessly from over 100 feet away. Its unique battery charger allows you to charge any M18&trade battery without sacrificing reception or sound quality. For added versatility, a high-power USB port allows you to charge most portable electronic devices over 50% faster than any competitor. The M18&trade Radio/Charger's lightweight, high-strength design includes a reinforced roll cage for protection from weather and abusive jobsite conditions. The radio/charger also offers the industry's largest on-board, weather-sealed storage compartment to protect your small belongings and smart phones. A 16" auxiliary input cord and 2 AAA batteries are included.
Qty:
Part #:729-2657-20
- M18&trade 2-Speed 1/4" Hex Impact Driver (Tool Only)
The M18&trade Cordless 2-Speed 1/4" Hex Impact Driver is the most powerful 1/4" hex compact impact driver in its class and offers the best power to size ratio among like competitors. Featuring a Milwaukee® built 4-Pole frameless motor and optimized impact mechanism, this impact driver delivers up to 2,750 RPM, 3,450 IPM and 1,500 in-lbs of fastening torque for class-leading performance. This is the only tool in its class to offer multiple speed/torque modes through proprietary 2-Mode Drive Control&trade. REDLINK&trade Intelligence provides optimized performance and overload protection using total system communication between tool, battery and charger. The M18&trade Cordless 1/4" Hex Impact Driver features an LED Light to illuminate work surfaces, and includes an all-metal, reversible belt clip for temporary tool storage.
Qty:
Part #:501581
- Orbital Jig Saw
The Milwaukee Orbital Jig Saw 6268-21 with LED light provides the ultimate accuracy, power, ergonomics, and versatility. The saw features an LED light for improved visibility of sight lines and a precision roller blade guide that yields the most accurate cuts of any shape. The 6.5 amp motor, 1 in. stroke with 3000 strokes per minute, tachometer feedback, and 4 position orbital cutting action gets the job done fast even in the toughest of materials. A cushion grip handle and counter balanced mechanism for low vibration provides optimal user comfort. The QUIK-LOK&trade blade clamp, keyless shoe adjustment of up to 45° in both directions, and extra long 12 ft. 8 in. cord provide ultimate versatility.
Qty:
Part #:729-2145-20
- M18&trade RADIUS&trade Compact Site Light
MOST VERSATILE LIGHT ON SITE - The M18&trade RADIUS&trade Compact Site Light is the World&rsquos first high output cordless site light on the market, and has the ability to provide light in task, area, and overhead applications. With 4,400 lumens of TRUEVIEW&trade High Definition output, the M18&trade Radius&trade LED Compact Site Light provides enough light to illuminate large work areas, and can be turned down to as low as 1,000 lumens for working in confined areas. A high impact polycarbonate lens, and IP54 ingress protection allows it to live in the toughest conditions. The combination of these technologies offers professionals the highest quality LED lighting solution, on or off the jobsite.
Qty:
Part #:506312
- 18 Gauge Shear
This new shear comes with a powerful 6.8 amp Milwaukee built motor. The ergonomic tactile grip is designed for more user comfort allowing you to make that straight cut when needed. The new lightweight, heavy-duty magnesium gear-case has been incorporated in the design for superior balance. The variable speed trigger (0-2500SPM) allows for smoother acceleration and performance when needed.
Qty:
Part #:729-2853-20
- M18 FUEL&trade 1/4" Hex Impact Driver (Tool Only) (Discontinued, Replaced by 2953-20)
The M18 FUEL&trade ¼&rdquo Hex Impact Driver is the Fastest, Most Compact, and Most Powerful tool in its class. The POWERSTATE&trade Brushless motor delivers up to 2,000in-lbs of torque and up to 30% Faster Driving speed, increasing user&rsquos productivity for the most demanding fasteners on the job. At only 4.59&rdquo in length, this is the Most Compact tool in its class, allowing users to have more access in tight spaces. The REDLINK PLUS&trade intelligence ensures maximum performance and protects from overloads, heating and or over-discharge. The REDLITHIUM Battery Pack delivers more work per charge and more work over the life of the pack when compared to competitors. The 4-Mode DRIVE CONTROL&trade provides greater control over output speed and power, for greater versatility. The Self-Tapping Screw mode provides faster installation time by reducing stripping of fasteners.
Qty:
Part #:729-2635-20
- M18&trade Cordless 18 Gauge Double Cut Shear (Tool Only)
With the introduction of the New M18&trade Cordless Shears, Milwaukee® has the most innovative and largest cordless shear selection on the market. By redesigning the body, we provide an inline wrist design that maximizes control during use. Also adding the industry&rsquos only Tool-Free 360° rotating head, our new shears can be used where hand snips have been needed to finish the cut. These innovations brought to each of the 3 new Milwaukee® Cordless Shears are changing the way tradesmen work on the jobsite today.
Qty:
Part #:729-2636-20
- M18&trade 14 Gauge Double Cut Shear (Tool Only)
With the introduction of the New M18&trade Cordless Shears, Milwaukee® has the most innovative and largest cordless shear selection on the market. By redesigning the body, we provide an inline wrist design that maximizes control during use. Also adding the industry&rsquos only Tool-Free 360° rotating head, our new shears can be used where hand snips have been needed to finish the cut. These innovations brought to each of the 3 new Milwaukee® Cordless Shears are changing the way tradesmen work on the jobsite today.
Qty:
Part #:729-2637-20
- M18&trade 18 Gauge Single Cut Shear (Tool Only)
With the introduction of the New M18&trade Cordless Shears, Milwaukee® has the most innovative and largest cordless shear selection on the market. By redesigning the body, we provide an inline wrist design that maximizes control during use. Also adding the industry&rsquos only Tool-Free 360° rotating head, our new shears can be used where hand snips have been needed to finish the cut. These innovations brought to each of the 3 new Milwaukee® Cordless Shears are changing the way tradesmen work on the jobsite today.
Qty:
Part #:729-2893-22CX
- M18 Brushless 2-Tool Combo Kit, Hammer Drill/Impact Driver
Our M18&trade Brushless 2-Tool Combo Kit (2893-22CX) offers the best in class drilling and fastening solutions. The 1/2" Hammer Drill (2902-20) and 1/4" Hex Impact Driver (2850-20) feature the M18&trade cordless system's patented technologies and electronics, innovative motor design, and superior ergonomics, providing the most efficient blend of power, weight and performance in its class. The Brushless 1/2in. Hammer Drill is the most powerful drill in its class, delivering 725 in.-lbs. of torque. The 1/4 in. Hex Impact Driver has the fastest application speed in its class and delivers 1,600 in.-lbs. of torque. Both of our compact tools feature MILWAUKEE® brushless motors optimized specifically for the tool. Built-in REDLINK&trade electronics enhances the performance of the M18&trade REDLITHIUM&trade batteries, providing more efficient power delivery and fewer trips to the charger. This combo kit includes our M18&trade 1/2" Hammer Drill, M18&trade 1/4" Hex Impact Driver, (1) M18&trade REDLITHIUM XC4.0 Battery Pack, (1) M18&trade REDLITHIUM CP2.0 Battery Pack, M18&trade/M12&trade Multi-Voltage Charger, (2 )belt clips, Side Handle, and Contractor Bag.
Qty:
Qty:
Part #:729-9565
- 1 Ton Electric Chain Hoist
All Milwaukee Professional Electric Chain Hoists offer an array of load lift and height options. With 1/2 to 2 Ton capacities and 10 ft. to 20 ft. lifting heights, you can order a Milwaukee Electric Chain Hoist to meet your roughest needs. All offer a multi-disc magnetic brake for positive load holding and spotting. Adjustable upper and lower limit switches, overload limiting clutch and latch-type ridged top hook. You can get single or three-phase voltage motors to meet your operation power requirements. The 24-volt pushbutton station fits easily in your hand to allow thumb, trigger or two-handed operation.
Qty:
Part #:729-2470-21
- M12&trade Plastic Pipe Shear Kit
Our M12&trade Plastic Pipe Shear Kit with the powerful M12&trade 12-Volt Lithium-Ion battery included can slice through 2 inch schedule 80 PVC in just 3 seconds. The pipe shear kit is compatible with M12&trade lithium-ion batteries, giving you more than 200 cuts on a single charge. The stainless steel blade and aluminum jaw are impact and water and rust resistant. The ultra- sharp M12&trade plastic pipe shear with pierce point makes burr-free cuts, allowing you to cut faster, cleaner and closer than traditional shears. PVC close to a wall or mounted to a stud is no challenge for the quick-return, offset blade for maximum efficiency on repetitive cuts. The MILWAUKEE® plastic pipe shear features a variable speed trigger for controlled cuts in warm and cold weather and an on-board fuel gauge that displays remaining battery charge and run time provide you with superior versatility and productivity. In addition to the pipe shear, this kit includes one M12&trade REDLITHIUM&trade CP1.5 battery pack, an M12&trade Lithium-Ion battery charger, and a carrying case.
Qty:
Part #:729-2696-24
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Combo Kits. Product Level 3 TOL 3 - 4 Piece Kits. Product Level 5 TOL Blank. AX Item Number 269624. Country of Origin VNM. Harmonized Tariff 8467290040.:
Qty:
Part #:729-2553-22
- M12 FUEL&trade 1/4" Hex Impact Driver Kit (Discontinued, Replaced by 3453-22)
The M12 FUEL&trade 1/4 in. Hex Impact Driver once again raises the bar for 12V performance with best in class driving speed, power, and size. By focusing on productivity, this Impact Driver gets the job done faster by being over 20% faster in application speed vs. the competition. This tool outputs over 1,300 in. lbs. of torque that allows the user to get more work done by completing a wide range of fastening. Measuring only 5.1&rdquo in length allows for unmatched access in tight spaces. The POWERSTATE&trade Brushless Motor delivers up to 0-3,300 RPM with constant power output to drive screws faster. REDLINK PLUS&trade Intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. For use with M12&trade REDLITHIUM&trade Compact Batteries or Extended Capacity Batteries which deliver more work per charge and more work over the life of the pack than competitive batteries on the market. The 4-Mode DRIVE CONTROL provides greater control over output speed and power for greater versatility by delivering 0-1,300 RPM in Mode 1, 0-2,400 RPM in Mode 2 and 0-3,300 RPM in Mode 3. Mode 4 is Self-Tapping Screw Mode which is designed to reduce walking when starting self-tapping screws as well as reduce overdriving, breaking and stripping out screws.
Qty:
Part #:729-2656-20
- M18&trade 1/4" Hex Impact Driver (Tool Only)
The M18&trade Cordless 1/4" Hex Impact Driver is the most powerful 1/4" hex compact impact driver in its class and offers the best power to size ratio among like competitors. Featuring a Milwaukee® built 4-Pole frameless motor and optimized impact mechanism, this impact driver delivers up to 2,750 RPM, 3,450 IPM and 1,500 in-lbs of fastening torque for class-leading performance. REDLINK&trade Intelligence provides optimized performance and overload protection using total system communication between tool, battery and charger. The M18&trade Cordless 1/4" Hex Impact Driver features an LED Light to illuminate work surfaces, and includes an all-metal, reversible belt clip for temporary tool storage.
Qty:
Part #:729-2760-20
- M18 FUEL&trade SURGE&trade 1/4" Hex Hydraulic Driver (Tool Only)
The M18 FUEL&trade SURGE&trade 1/4" Hex Hydraulic Driver is the quietest cordless fastening solution on the market. With Milwaukee's new FLUID-DRIVE&trade Hydraulic Powertrain, users will experience up to 50% quieter operation, 3X less vibration for smoother operation, and faster driving speeds compared to standard impacts. The POWERSTATE&trade Brushless Motor delivers up to 0-3,000 RPM with constant power output to drive screws faster. REDLINK PLUS&tradeIntelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. For use with REDLITHIUM&trade Compact Batteries or Extended Capacity Batteries (sold separately), which deliver more work per charge and more work over the life of the pack than competitive batteries on the market. The 4-Mode DRIVE CONTROL&tradeprovides greater control over output speed and power for greater versatility. Self-Tapping Screw Mode is designed to reduce walking when starting self-tapping screws as well as reduce overdriving, breaking and stripping out screws.
Qty:
Part #:729-2475-20
- Business Unit Tools. Product Level 1 Tools M12. Product Level 2 Tools System Enhancement. Product Level 3 TOL Pumps & Inflators. Product Level 4 TOL Inflators. Product Level 5 TOL Blank. AX Item Number 247520. Country of Origin TWN. Harmonized Tariff 8414801685.:
Qty:
Part #:729-2893-22
- M18 Brushless 2-Tool Combo Kit, Hammer Drill/ 3-Speed Impact Driver
Our M18&trade Brushless 2-Tool Combo Kit (2893-22) offers the best in class drilling and fastening solutions. The 1/2" Brushless Hammer Drill (2902-20) and 1/4" Hex Brushless 3 Speed Impact Driver (2851-20) feature the M18&trade cordless system's patented technologies and electronics, innovative motor design, and superior ergonomics, providing the most efficient blend of power, weight and performance in its class. The brushless 1/2" Hammer Drill is the most powerful drill in its class, delivering 725 in.-lbs. of torque. The 1/4" Hex 3 Speed Impact Driver has the fastest application speed in its class and delivers 1,600 in.-lbs. of torque. Both of our compact tools feature MILWAUKEE® brushless motors optimized specifically for the tool. Built-in REDLINK&trade electronics enhances the performance of the M18&trade REDLITHIUM&trade batteries, providing more efficient power delivery and fewer trips to the charger. This combo kit includes our M18 Brushless 1/2" Hammer Drill, M18&trade Brushless 1/4" Hex Impact Driver, (2) M18&trade REDLITHIUM&trade XC4.0 Batteries, a M18&trade/M12&trade Multi-Voltage Charger, Side Handle, (2) Belt Clips and a Contractor Bag
Qty:
Part #:295220
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools System Enhancement. Product Level 3 TOL Audio. Product Level 4 TOL Other. Product Level 5 TOL Other. AX Item Number 295220. Country of Origin CHN. Harmonized Tariff 8527925000.:
Qty:
Qty:
Part #:729-3453-20
- Business Unit Tools. Product Level 1 Tools M12. Product Level 2 Tools Drilling & Driving. Product Level 3 TOL Impact Drivers. Product Level 4 TOL Brushless. Product Level 5 TOL FUEL. AX Item Number 345320. Country of Origin CHN. Harmonized Tariff 8467290040.:
Qty:
Part #:729-3697-22
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Combo Kits. Product Level 3 TOL 2 Piece Kits. Product Level 4 TOL FUEL. Product Level 5 TOL FUEL. AX Item Number 369722. Country of Origin VNM. Harmonized Tariff 8467290040.:
Qty:
Displaying: 1 - 24 of 26 Matching Items