Concrete Vibrator
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Power Tools: Concrete Vibrator Mag Drill Pipe Threader Replacement Parts Thread Rod Cutter Tower Light Work Light
Part #:511341
- M18&trade Work Light
OUTSHINE, OUTLAST. The M18&trade Work Light lasts 600X longer than conventional incandescent bulbs. Powered by the M18&trade REDLITHIUM&trade battery, it runs up to 4X longer on a single charge. Its 135° rotating head allows you to easily direct the light beam at the desired work area, while its integrated hook enables hands-free use.With a sealed aluminum head to provide impact and weather resistance, the cordless work light comes with a limited lifetime LED warranty.
Qty:
Part #:834-630705000
- Inner support flange for angle grinders (630705000)
For all angle grinders with M 14-spindle thread
$
5.28
Qty:
Part #:834-630706000
- Flange nut M 14 (630706000)
For all angle grinders with M 14-spindle thread
$
4.84
Qty:
closeout
$413.00 MSRP
$
281.00
Part #:213120
- CLOSEOUTS Only 1 Left!
- M18&trade ROCKET&trade Dual Power Tower Light
25% More Light, All Day Operation. The M18&trade ROCKET&trade Dual Power Tower Light is providing more light on the job with 2,500 lumens of TRUEVIEW&trade High Definition Output. All while having the capability being Dual Power, powered by M18&trade or extension cord.The light head can be extended from 4-7&rsquo to light overhead work or minimize shadows when casting light downward. Capable of filling large areas with light, it provides 2,500 lumens in its high mode, 1,100 in medium and 700 in low, and it can run for up to 4, 8, or 12 hours with an M18&trade REDLITHIUM&trade XC 5.0 Battery Pack. It uses TRUEVIEW&trade High Definition Output providing neutral white color and a high color rendering index paired with a Milwaukee® designed reflector to produce an even beam pattern. Its reinforced legs are impact resistant, and its low center of gravity provides a stable base. The light head is protected by an impact-resistant lens and bezel, and it nests into a protective shroud for secure transport and storage. Its LEDs never need to be replaced, and are backed by a limited lifetime warranty. The combination of these technologies offers professionals the highest quality LED lighting solution, on or off the jobsite.
Qty:
Part #:729-2872-20
- M18&trade Brushless Threaded Rod Cutter
Our M18&trade Brushless Threaded Rod Cutter is Milwaukee's dedicated solution for cutting the most common threaded rod sizes on the job site, including coarse 1/4", 3/8" and 1/2" mild steel to 1/4" and 3/8" stainless steel. The cordless threaded rod cutter is powered by a brushless motor and delivers 400+ cuts while powered by an M18&trade REDLITHIUM&trade 2.0Ah Battery. The four-sided cutting dies allow you to cut multiple sizes of threaded rod on one tool by simply rotating the dies. The all thread cutter has the clearest line of sight and delivers clean, burr-free cuts enabling you to thread a nut on by hand without having to file down the ends. The rod cutter features optimized blade geometry and cut speed to prevent chips and sparks while cutting. It has auto jaw opening allowing you to perform fast, repetitive cuts while a reverse button helps prevent unintended cuts. Its centered grip provides the best balance for one-handed overhead trims, while the flat horizontal design provides you with a stable surface for benchtop cuts.
Qty:
Part #:729-2872-21
- M18&trade Brushless Threaded Rod Cutter Kit
Our M18&trade Brushless Threaded Rod Cutter Kit is Milwaukee's dedicated solution for cutting the most common threaded rod sizes on the job site, including coarse 1/4", 3/8" and 1/2" mild steel to 1/4" and 3/8" stainless steel. The cordless threaded rod cutter is powered by a brushless motor and delivers 400+ cuts while powered by an M18&trade REDLITHIUM&trade 2.0Ah Battery. The four-sided cutting dies allow you to cut multiple sizes of threaded rod on one tool by simply rotating the dies. The all thread cutter has the clearest line of sight and delivers clean, burr-free cuts enabling you to thread a nut on by hand without having to file down the ends. The rod cutter features optimized blade geometry and cut speed to prevent chips and sparks while cutting. It has auto jaw opening allowing you to perform fast, repetitive cuts while a reverse button helps prevent unintended cuts. Its centered grip provides the best balance for one-handed overhead trims, while the flat horizontal design provides you with a stable surface for benchtop cuts. The Milwaukee Threaded Rod Cutter kit includes one M18&trade REDLITHIUM&trade 2.0Ah Battery, a multi-voltage charger, and a carrying case.
Qty:
Part #:810060
- For Use With Mfr. Model Number 600398420, 600407420, 600408420, 600410420, 600418420, 600428420, 600432420, 600464420, 600465420, 600468420, 600476420, 600488420, 600507420, 600548420, 600552420, 600562420, 600572420
$
9.14
Qty:
$
12.25
Qty:
Part #:834-341101480
- For Use With Mfr. Model Number 600160420, 600259420, 600263420, 600280420, 600286420, 600290420, 600292420, 600354420, 600376420, 600388420, 600408420, 600465420, 600562420, 600572420, 600680420, 600683420, 601451420, 601452420, 602131420, 606111420, 606204420, 606205420, 606696420, 606701420, 606702420, 606711420, 606721420, 606722420, 606724420
$
9.14
Qty:
Qty:
Part #:729-2874-22HD
- AX Item Number 287422HD. Country of Origin CHN. Harmonized Tariff 8467290090:
Qty:
Part #:213620
- AX Item Number 213620. Country of Origin CHN. Harmonized Tariff 8513104000:
Qty:
Part #:729-2696-24
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Combo Kits. Product Level 3 TOL 3 - 4 Piece Kits. Product Level 5 TOL Blank. AX Item Number 269624. Country of Origin VNM. Harmonized Tariff 8467290040.:
Qty:
Part #:729-4274-21
- Business Unit Tools. Product Level 1 Tools Corded. Product Level 2 Tools Metal Working. Product Level 3 TOL Mag Drills. Product Level 4 TOL Blank. Product Level 5 . AX Item Number 427421. Country of Origin CHN. Harmonized Tariff 8467210010.:
Qty:
Part #:729-2787-22HD
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Metal Working. Product Level 3 TOL Mag Drills. Product Level 4 TOL Blank. Product Level 5 TOL FUEL. AX Item Number 278722HD. Country of Origin CHN. Harmonized Tariff 8467210010.:
Qty:
Qty:
Part #:834-626731000
- Cutting extraction hood CED 125 Plus (626731000)
Extraction hood with plunge function and optimized flow channel for particularly low-dust cutting both indoors and outdoors
Compact construction form table can be removed without tools for more flexibility when working close to walls and improved visibility for freehand cuts
Cutting depth adjustable without tools max. cutting depth for freehand cuts 27 mm, with table 25 mm, with guide rail 20 mm
Robust sheet metal table for tilt-proof operation. Connection for dust extraction Ø 35/41 mm
Anti-static plastic prevents electric charging and dust accumulations for a constantly high suction power
Large, colored operating elements for simple, tool-free adjustment, even when wearing gloves
Sheet metal table with guide rollers for easy, precise feed. Protect delicate surfaces from scratches.
Enables the use of a Metabo precision guide rail for making cuts with great precision
Scope of delivery incl. two hole nut 5/8" and M 14.
Cordless Angle Grinder Suitable for W..18 LT BL 11-125, W..18 LTX BL 15-125 Quick
Plug-in Angle Grinder Suitable for all Metabo angle grinders with a diameter of 125mm, except for W 650, W 750, W.. 850, WQ 1000, W 1100, W 1150, WP 1200-125 RT, WEV 1500-125 RT, WE 1500-125 RT
$
333.38
Qty:
Displaying: 1 - 19 of 19 Matching Items