Concrete Vibrator
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Power Tools: Concrete Vibrator Press Tool Radio Router Tool Storage Vacuum
Part #:729-2792-20
- M18&trade Jobsite Radio/Charger
The Milwaukee® M18&trade Jobsite Radio/Charger is the first charging radio to bring the power of Bluetooth® to the jobsite, while delivering the industry's best reception and sound. The most advanced radio of its kind, the M18&trade Jobsite Radio/Charger features a Bluetooth® receiver so you can stream rich, full sound wirelessly from over 100 feet away. Its unique battery charger allows you to charge any M18&trade battery without sacrificing reception or sound quality. For added versatility, a high-power USB port allows you to charge most portable electronic devices over 50% faster than any competitor. The M18&trade Radio/Charger's lightweight, high-strength design includes a reinforced roll cage for protection from weather and abusive jobsite conditions. The radio/charger also offers the industry's largest on-board, weather-sealed storage compartment to protect your small belongings and smart phones. A 16" auxiliary input cord and 2 AAA batteries are included.
Qty:
Part #:729-2922-22
- M18&trade FORCE LOGIC&trade Press Tool w/ ONE-KEY&trade w/ 1/2"-2" CTS Jaws
Our M18&trade FORCE LOGIC&trade Press Tool with ONE-KEY&trade with 1/2"-2" CTS Jaws is the industry&rsquos first press tool with remote tracking, management, and lockout and is the smallest, most intelligent press tool on the market. The state-of-the-art press tool features an in-line design and brushless motor, enabling more run-time per charge and faster cycle times while being significantly smaller and nearly 20% lighter than the leading competitor. Like all MILWAUKEE® press tools, the in-line design with a forward hand position unlocks your ability to press with one hand and will fit nearly anywhere you can fit your arm. Equipped with REDLINK&trade electronics, the cordless press tool also provides the highest level of press accuracy and reliability available in the industry. Auto-cycle ensures a full press every time and the pre-press battery check prevents the tool from starting a press it can&rsquot complete. This press tool is ONE-KEY&trade enabled, logging, and uploading data from every press for retrieval via the ONE-KEY&trade desktop or mobile app. This allows for performance monitoring and provides you peace of mind in quality connections. With ½&rdquo to 4&rdquo capacity and compatibility with over 20 unique fitting systems, the plumbing press tool is a comprehensive press solution for plumbers and mechanical contractors. In addition to the press tool, this kit includes two M18&trade REDLITHIUM&trade CP2.0 battery packs, 1/2 in., 3/4 in., 1 in., 1 1/4 in, 1 1/2 in., and 2 in. jaws, and a carrying case.
Qty:
Part #:272320
- AX Item Number 272320. Country of Origin MEX. Harmonized Tariff 8467290055:
Qty:
Part #:729-5625-20
- 3-1/2 Max HP Fixed-Base Production Router
Milwaukee's heavy-duty, 3-1/2 max hp fixed-base production router, model 5625-20, features a powerful 15 amp Milwaukee-built motor with electronic variable speed (10,000-22,000 rpm), premium feedback circuitry and soft-start. To ensure a consistent, quality finish, the 36-position speed dial allows the user to precisely match the tool rpm to the bit diameter while the premium electronic feedback circuitry maintains speed and power under load. For controlled start-ups and reduced motor wear, the 5625-20 router also features a reliable electronic soft-start. Fully-loaded for production free-hand and router table routing, the router features Milwaukee's exclusive linear height adjustment system with above-the-table access, providing fast, precise coarse adjustments to within 1/8 in. and micro-fine adjustments to within 1/64 in. Unlike helical systems, the motor doesn&rsquot spin as the height is changed, ensuring that the motor controls and power cord remain in a constant, optimal position. The revolutionary system can be accessed from above a router table with the included T-wrench or any 3/8 in. hex socket wrench with extension, eliminating the need for awkward, below the table adjustments or the need for an auxiliary router lift. With an industry standard bolt-hole pattern and router base diameter along with removable handles for insert plate clearance, the 5625-20 readily converts any existing table or production jig set-up. For added protection when table-mounted, the router features an exclusive motor contamination shield that keeps damaging debris out without sacrificing airflow. The router also features a durable, rubber shield for dust-free access to the height adjustment system. For maximum operator control and comfort, the 5625-20 router has impact-resistant, tactile-grip handles set wide apart and angled forward. A heavy-duty, 22 amp switch and speed control dial positions are conveniently located to allow the operator full motor control while keeping both hands on the tool. The router features a durable, machined aluminum motor housing and base along with premium 1/2 in. self-releasing collet, 100% sealed ball bearings and a durable 8 ft. power cord with flexible strain relief for years of accurate, reliable operation.
Qty:
Part #:501573
- M18&trade 2-Gallon Wet/Dry Vacuum
The M18&trade 2-Gallon Wet/Dry Vacuum provides users with a Powerful and Portable Wet/Dry Clean-up tool. A high performance motor creates powerful suction for both wet and dry applications. Its stackable design and organized on-board storage keeps all of the attachments inside the unit for convenient transport and storage. The 0880-20 comes with a flexible hose, crevice tool, utility nozzle, and a certified HEPA filter. With 30+ minutes of run time on a M18&trade REDLITHIUM&trade HIGH DEMAND&trade 9.0 Battery Pack, its ideal for extended spot and area clean up.
Qty:
Part #:729-2473-20
- M12&trade FORCE LOGIC&trade Press Tool
Our M12&trade FORCE LOGIC&trade Press Tool Kit is the lightest press tool on the market and represents a new level in portability and accessibility around installed pipe. The M12&trade press tool features a one-handed, in-line design enabling you to operate the tool nearly anywhere you can fit your arm. Built-in REDLINK&trade technology enables the plumbing press tool to monitor the force output, delivering you with quality connections. A visual indicator alerts you when a secure connection has been achieved and when the tool needs calibration. The cordless press tool features the best calibration standards, only requiring service every 32,000 crimps. This allows you to perform up to 4X more connections between services, keeping the tool on the job site up to 4X longer than competitive units. When used with our MILWAUKEE® press jaws, this tool delivers quality press connections on all major fitting brands. Our FORCE LOGIC&trade press tool is powered by Milwaukee M12&trade REDLITHIUM&trade batteries, allowing you to Cut, Fasten and Connect on One System.
Qty:
Part #:729-2473-22
- M12&trade FORCE LOGIC&trade Press Tool Kit with Jaws
Our M12&trade FORCE LOGIC&trade Press Tool Kit with Jaws is the lightest press tool on the market and represents a new level in portability and accessibility around installed pipe. The M12&trade press tool features a one-handed, in-line design enabling you to operate the tool nearly anywhere you can fit your arm. Built-in REDLINK&trade technology enables the plumbing press tool to monitor the force output, delivering you with quality connections. A visual indicator alerts you when a secure connection has been achieved and when the tool needs calibration. The cordless press tool features the best calibration standards, only requiring service every 32,000 crimps. This allows you to perform up to 4X more connections between services, keeping the tool on the job site up to 4X longer than competitive units. When used with our MILWAUKEE® press jaws, this tool delivers quality press connections on all major fitting brands. Our FORCE LOGIC&trade press tool is powered by Milwaukee M12&trade REDLITHIUM&trade batteries, allowing you to Cut, Fasten and Connect on One System.
Qty:
Qty:
Part #:729-0882-20
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Jobsite Clean-up. Product Level 3 TOL Vacuums. Product Level 4 TOL Compact Vacs. AX Item Number 088220. Country of Origin VNM. Harmonized Tariff 8508110000.:
Qty:
Part #:729-2922-20
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Plumbing. Product Level 3 TOL Press. Product Level 4 TOL Tool (No Jaws). Product Level 5 TOL Force Logic. AX Item Number 277320. Country of Origin DEU. Harmonized Tariff 8467290090.:
Qty:
Part #:729-2773-20L
- Country of Origin DEU:
Qty:
Qty:
Qty:
Part #:729-48-22-8250
- Jobsite Cooler
Milwaukee Tool&rsquos jobsite cooler is specifically designed to be durable enough to withstand tough jobsite conditions. The cooler utilizes double insulation and a food-grade leak proof liner to keep ice cold for 24 hours without leaking. Additionally, Milwaukee constructed the cooler with 1680D ballistic material base and heavy duty metal zippers for a longer life. A tape measure clip with a bottle opener provides ultimate versatility. Lastly, Milwaukee implemented a tech pocket and dry storage compartment to make this cooler a versatile jobsite storage solution.
Qty:
Part #:295220
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools System Enhancement. Product Level 3 TOL Audio. Product Level 4 TOL Other. Product Level 5 TOL Other. AX Item Number 295220. Country of Origin CHN. Harmonized Tariff 8527925000.:
Qty:
Qty:
Part #:729-0970-20
- Country of Origin USA:
Qty:
Qty:
Part #:729-49-16-2697X
- 1/2" - 2" IPS-P Pivoting Press Ring Kit for M18&trade FORCE LOGIC&trade Press Tools
Our IPS-P Pivoting Press Ring Kits are designed for use with M18&trade & M12&trade FORCE LOGIC&trade Press Tool on Viega® MegaPress®, Apollo® PowerPress® and other press fitting systems. The IPS-P Pivoting Press Ring Kit is a more efficient alternative to welding and threading, enabling you to press connections on schedule 5 up to schedule 40 black iron pipe and 304/316 stainless steel pipe. Pivoting functionality delivers greater access in tight spaces when paired with a compatible Milwaukee® Ring Jaw and FORCE LOGIC&trade Press Tool. Our press blocking system prevents improper ring and ring jaw mismatch, providing peace of mind in quality connections. The IPS-P Pivoting Press Rings, combined with a compatible Milwaukee® Ring Jaw and in-line FORCE LOGIC&trade Press Tool, deliver unrivaled access in tight spaces and around installed pipes, providing you with controlled, flameless copper connections for unmatched productivity.
Qty:
Qty:
Displaying: 1 - 20 of 20 Matching Items