Die Grinder
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Power Tools: Die Grinder Right Angle Drill Rotary Tool Sliding Compound Miter Saw Sprayer Thread Rod Cutter Toilet Auger
Part #:503780
- 1/2" Hole-Hawg® Drill 300/1200 RPM (Replaced 1610-1)
Setting the standard for large-hole drilling in tight spaces. The 1/2" Hole-Hawg® Drill offers power and torque in a compact design that makes it perfect for drilling between studs and joists. The powerful motor features two speed ranges plus reverse for increased versatility. The drill offers a 4-5/8&rdquo self-feed bit capacity and an extra long pipe handle to help you control power.
Qty:
Part #:729-2615-20
- M18&trade Cordless Right Angle Drill (Tool Only)
The most compact 18-volt right angle drill driver on the market. With a total profile length of just 3-3/4&rdquo, the M18&trade Cordless Lithium-Ion Right Angle Drill is a compact, powerful solution for drilling and driving in tight spaces. It features the industry&rsquos first electronic clutch, with 12 torque settings and an LED indicator for fastening with complete control. The REDLITHIUM&trade Compact Battery Pack or XC Extended Battery Pack (sold separately) deliver more work per charge and more work over pack life than the competitors, even in extreme conditions. The onboard fuel gauge helps you monitor the charge precisely, so there&rsquos less downtime on the job, and a built-in LED Light illuminates the work surface. An extended multi-position paddle switch gives you ultimate comfort and convenience during prolonged use.
Qty:
Part #:729-2872-20
- M18&trade Brushless Threaded Rod Cutter
Our M18&trade Brushless Threaded Rod Cutter is Milwaukee's dedicated solution for cutting the most common threaded rod sizes on the job site, including coarse 1/4", 3/8" and 1/2" mild steel to 1/4" and 3/8" stainless steel. The cordless threaded rod cutter is powered by a brushless motor and delivers 400+ cuts while powered by an M18&trade REDLITHIUM&trade 2.0Ah Battery. The four-sided cutting dies allow you to cut multiple sizes of threaded rod on one tool by simply rotating the dies. The all thread cutter has the clearest line of sight and delivers clean, burr-free cuts enabling you to thread a nut on by hand without having to file down the ends. The rod cutter features optimized blade geometry and cut speed to prevent chips and sparks while cutting. It has auto jaw opening allowing you to perform fast, repetitive cuts while a reverse button helps prevent unintended cuts. Its centered grip provides the best balance for one-handed overhead trims, while the flat horizontal design provides you with a stable surface for benchtop cuts.
Qty:
Part #:729-2872-21
- M18&trade Brushless Threaded Rod Cutter Kit
Our M18&trade Brushless Threaded Rod Cutter Kit is Milwaukee's dedicated solution for cutting the most common threaded rod sizes on the job site, including coarse 1/4", 3/8" and 1/2" mild steel to 1/4" and 3/8" stainless steel. The cordless threaded rod cutter is powered by a brushless motor and delivers 400+ cuts while powered by an M18&trade REDLITHIUM&trade 2.0Ah Battery. The four-sided cutting dies allow you to cut multiple sizes of threaded rod on one tool by simply rotating the dies. The all thread cutter has the clearest line of sight and delivers clean, burr-free cuts enabling you to thread a nut on by hand without having to file down the ends. The rod cutter features optimized blade geometry and cut speed to prevent chips and sparks while cutting. It has auto jaw opening allowing you to perform fast, repetitive cuts while a reverse button helps prevent unintended cuts. Its centered grip provides the best balance for one-handed overhead trims, while the flat horizontal design provides you with a stable surface for benchtop cuts. The Milwaukee Threaded Rod Cutter kit includes one M18&trade REDLITHIUM&trade 2.0Ah Battery, a multi-voltage charger, and a carrying case.
Qty:
Part #:729-2615-21
- M18&trade Cordless Lithium-Ion Right Angle Drill Kit (Discontinued, Replace with 2615-20)
The most compact 18-volt right angle drill driver on the market. With a total profile length of just 3-3/4&rdquo, the M18&trade Cordless Lithium-Ion Right Angle Drill is a compact, powerful solution for drilling and driving in tight spaces. It features the industry&rsquos first electronic clutch, with 12 torque settings and an LED indicator for fastening with complete control. It comes with the REDLITHIUM&trade XC Extended Battery Pack and M18&trade and M12&trade multi-voltage charger, delivering more work per charge and more work over pack life than the competitors, even in extreme conditions. The onboard fuel gauge helps you monitor the charge precisely, so there&rsquos less downtime on the job, and a built-in LED Light illuminates the work surface. An extended multi-position paddle switch gives you ultimate comfort and convenience during prolonged use.
Qty:
Qty:
Part #:729-2820-20PS
- M18&trade SWITCH TANK&trade 4-Gallon Backpack Sprayer (Tool Only)
Our M18&trade SWITCH TANK&trade 4-Gallon Backpack Sprayer delivers the industry&rsquos first interchangeable tank design with no manual pumping. Designed to meet the needs of professional landscape maintenance, the battery-powered backpack sprayer provides you with instant, constant and adjustable pressure up to 120 PSI and a 25 ft spray distance. The 5-mode pressure adjustment knob adjusts the pressure between 20 &ndash 120 PSI, giving you the capability to complete a wide range of applications. Our M18&trade REDLITHIUM&trade XC3.0 Battery (sold seperately) provides you with up to 12 tanks of spraying per charge. The 4-Gallon Sprayer Tank Assembly features a dual diaphragm pump for longer pump life and Viton® seals for increased durability against harsh chemicals. The sprayer tank has a wide mouth opening for easier pouring and a strainer that filters debris from getting into the tank. The backpack frame includes wide straps giving you added comfort during extended spraying applications and a handle for convenient transport and storage. The 4-Gallon Sprayer is made up of two components &ndash the M18&trade SWITCH TANK&trade Powered Base and the SWITCH TANK&trade 4-Gallon Sprayer Tank Assembly. The Powered Base includes the motor, battery compartment, and REDLINK&trade electronics, while the interchangeable Tank Assembly includes the pump, hose, and wand. The isolated pump, hose, and wand design allows you to add on tank assemblies for different spraying applications, eliminating cross-chemical contamination. It also provides you with the ability to replace the tank assembly at a lower cost of ownership compared to replacing the entire sprayer. The Powered Base is also compatible with the SWITCH TANK&trade 4-Gallon Concrete Sprayer (49-16-28CS) and 4-Gallon Water Supply (49-16-28WS) Tank Assemblies. Our M18&trade SWITCH TANK&trade 4-Gallon Backpack Sprayer is part of the M18&trade system which is fully compatible with over 175 tools.
Qty:
Part #:729-3107-6
- Business Unit Tools. Product Level 1 Tools Corded. Product Level 2 Tools Drilling & Driving. Product Level 3 TOL RAD. Product Level 4 . Product Level 5 TOL Blank. AX Item Number 31076. Country of Origin CHN. Harmonized Tariff 8467210050.:
Qty:
Part #:729-2576-20
- M12&trade TRAPSNAKE&trade 6' Toilet Auger (Tool Only) (Discontinued, Replaced by 2576-21)
Our M12&trade TRAPSNAKE&trade 6 ft. Toilet Auger is the ideal solution for service plumbers and maintenance crews to unclog toilets and floor traps. The M12&trade TRAPSNAKE&trade Driver is the first powered unit optimized for the challenges of porcelain fixtures, delivering the power and speed to work through tough clogs in tight traps. Optimized electronics protect the fixture from the auger and allow you to feel when engaged with a blockage to aid in retrieving. The MILWAUKEE® toilet auger features many industry-firsts, including a fixed rubber boot for maximum porcelain protection, an integrated locking mechanism to hold the cable in place for easy telescoping extension and replaceable cables to maximize the longevity of the tool. As part of the TRAPSNAKE&trade Porcelain Auger System, you can interchange the M12&trade TRAPSNAKE&trade Driver with the auger handle or use it with other auger attachments for versatility and capabilities never seen before in a toilet auger.
Qty:
Part #:729-2733-20
- Country of Origin CHN:
Qty:
Part #:729-2820-21PS
- M18&trade SWITCH TANK&trade 4-Gallon Backpack Sprayer Kit
Our M18&trade SWITCH TANK&trade 4-Gallon Backpack Sprayer kit delivers the industry&rsquos first interchangeable tank design with no manual pumping. Designed to meet the needs of professional landscape maintenance, the battery-powered backpack sprayer provides you with instant, constant and adjustable pressure up to 120 PSI and a 25 ft spray distance. The 5-mode pressure adjustment knob adjusts the pressure between 20 &ndash 120 PSI, giving you the capability to complete a wide range of applications. Our M18&trade REDLITHIUM&trade XC3.0 Battery provides you with up to 12 tanks of spraying per charge. The 4-Gallon Sprayer Tank Assembly features a dual diaphragm pump for longer pump life and Viton® seals for increased durability against harsh chemicals. The sprayer tank has a wide mouth opening for easier pouring and a strainer that filters debris from getting into the tank. The backpack frame includes wide straps giving you added comfort during extended spraying applications and a handle for convenient transport and storage. The 4-Gallon Sprayer is made up of two components &ndash the M18&trade SWITCH TANK&trade Powered Base and the SWITCH TANK&trade 4-Gallon Sprayer Tank Assembly. The Powered Base includes the motor, battery compartment, and REDLINK&trade electronics, while the interchangeable Tank Assembly includes the pump, hose, and wand. The isolated pump, hose, and wand design allows you to add on tank assemblies for different spraying applications, eliminating cross-chemical contamination. It also provides you with the ability to replace the tank assembly at a lower cost of ownership compared to replacing the entire sprayer. The Powered Base is also compatible with the SWITCH TANK&trade 4-Gallon Concrete Sprayer (49-16-28CS) and 4-Gallon Water Supply (49-16-28WS) Tank Assemblies. Our M18&trade SWITCH TANK&trade 4-Gallon Backpack Sprayer is part of the M18&trade system which is fully compatible with over 175 tools. In addition to the backpack sprayer, the kit includes one M18&trade REDLITHIUM&trade XC3.0 Battery and an M18&trade/M12&trade Multi-Voltage Charger.
Qty:
Qty:
Part #:729-2807-20
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Drilling & Driving. Product Level 3 TOL Large Hole Drilling. Product Level 4 TOL Blank. Product Level 5 TOL FUEL. AX Item Number 280720. Country of Origin CHN. Harmonized Tariff 8467210050.:
Qty:
Part #:834-600616420
- GE 710 Plus (600616420) Die Grinder
Universal die grinder with long grinding spindle for deburring, milling, grinding and cutting - even in tight spaces
Spindle lock for simple change of tools
Cast aluminum bearing flange for long life of the machine
Vario-Constamatic (VC)-Full wave electronics for working at customized speeds to suit the application materials, and speeds that remain almost constant even under load
Thumbwheel for speed preselection
Electronic safety shutdown of the motor for safe working in case the tool stops unexpectedly
Restart protection prevents unintentional start-up after power supply interruption
Electronic overload protection for long service life
Precise collar for stationary use
Removable protective rubber cap for comfortable and safe working
Slim housing for ideal handling
Precision collet for precise concentricity
Metabo Long-life motor with patented dust protection for long service life
$
414.36
Qty:
Part #:834-600617420
- GEP 710 Plus (600617420) Die Grinder
Universal die grinder with dead man function and long grinding spindle for very safe work - even in tight spaces
Paddle switch with dead-man function safe to operate due to an ergonomically integrated non-slip switch
Spindle lock for simple change of tools
Cast aluminum bearing flange for long life of the machine
Vario-Constamatic (VC)-Full wave electronics for working at customized speeds to suit the application materials, and speeds that remain almost constant even under load
Thumbwheel for speed preselection
Electronic safety shutdown of the motor for safe working in case the tool stops unexpectedly
Restart protection prevents unintentional start-up after power supply interruption
Electronic overload protection for long service life
Precise collar for stationary use
Removable protective rubber cap for comfortable and safe working
Slim housing for ideal handling
Precision collet for precise concentricity
Metabo Long-life motor with patented dust protection for long service life
$
414.36
Qty:
Displaying: 1 - 15 of 15 Matching Items