Drill
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Power Tools: Drill Hammer Drill Replacement Parts Router
Part #:834-600580420
- BE 75-16 (600580420) Drill Cardboard box
Robust die cast aluminum gear housing for optimum heat dissipation and durability
Rotating carbon brush bridge for maximum performance even in counter-clockwise operation for removing stubborn screws
Vario (V)-electronics for working at customized speeds to suit various application materials.
Metabo S-automatic torque limiting clutch mechanical decoupling of the drive for safe working should the drill stop unexpectedly.
Spindle with hexagonal recess for screwdriver bits for working without chuck
Suitable for powerful drilling of larger diameters and for stirring thick liquid-like materials
Qty:
Part #:500250
-
TE 2 Rotary hammer Rotary hammer perf pkg TE 2 #3497789
Compact dual-mode, pistol-grip SDS Plus (TE-C) rotary hammer &ndash for hammer drilling and rotary-only drilling
Weight according EPTA-Procedure 01/20036 lb.
Working modeHammer drilling, Drilling
Hammer drilling diameter range5/32 - 7/8 in
Kit Contains
TE 2 120V Rotary Hammer
TE 2 Tool Case
Chuck Grease
Hammer Drill Bit TE-CX 3/8"x6"
Hammer Drill Bit TE-CX 1/4"x6"
Hammer Drill Bit TE-CX 3/16"x6"
Weight according EPTA-Procedure 01/20036 lb.Working modeHammer drilling, DrillingHammer drilling diameter range5/32 - 7/8 inOptimum Hammer drilling range5/32 - 15/32 inSingle impact energy1.3 ft-lbsHammer drilling RPM1200 rpmFull hammering frequency4600 impacts/minuteFunctionalityReverse mode, Depth gaugeTriaxial vibration value for hammer drilling into concrete (ah,HD)13.5 m/s² 1 A-weighted emission sound pressure level91 dB (A) 2 Dimensions (LxWxH)13.9 x 3.5 x 8 mm
$
397.70
Qty:
Part #:834-630705000
- Inner support flange for angle grinders (630705000)
For all angle grinders with M 14-spindle thread
Qty:
Part #:834-630706000
- Flange nut M 14 (630706000)
For all angle grinders with M 14-spindle thread
Qty:
Part #:810060
- For Use With Mfr. Model Number 600398420, 600407420, 600408420, 600410420, 600418420, 600428420, 600432420, 600464420, 600465420, 600468420, 600476420, 600488420, 600507420, 600548420, 600552420, 600562420, 600572420
$
8.27
Qty:
$
11.07
Qty:
Part #:834-341101480
- For Use With Mfr. Model Number 600160420, 600259420, 600263420, 600280420, 600286420, 600290420, 600292420, 600354420, 600376420, 600388420, 600408420, 600465420, 600562420, 600572420, 600680420, 600683420, 601451420, 601452420, 602131420, 606111420, 606204420, 606205420, 606696420, 606701420, 606702420, 606711420, 606721420, 606722420, 606724420
$
8.27
Qty:
Qty:
Part #:272320
- AX Item Number 272320. Country of Origin MEX. Harmonized Tariff 8467290055:
Qty:
Part #:729-5378-20
- 1/2 in. Pistol Grip Dual Torque Hammer Drill, 0-1350/0-2500 RPM (Discontinued, Replaced by 5376-20)
The power to drill ½&rdquo holes in concrete. The versatility to excel at wood and steel applications. This powerful 7.5-amp, ½&rdquo Hammer Drill features dual trigger speed control in two ranges, with more power for the toughest applications or more speed and less torque for lighter applications. Use it for drilling in wood with flat boring bits, hole saws, auger bits and Selfeed bits, or in steel with twist bits and in concrete with percussion bits. The removable side handle helps set the depth rod for pre-set hole drilling. The heavy-duty metal gear case withstands daily jobsite use, yet the drill&rsquos lightweight, balanced pistol-grip design reduces fatigue during a long work day.
Qty:
Part #:729-5625-20
- 3-1/2 Max HP Fixed-Base Production Router
Milwaukee's heavy-duty, 3-1/2 max hp fixed-base production router, model 5625-20, features a powerful 15 amp Milwaukee-built motor with electronic variable speed (10,000-22,000 rpm), premium feedback circuitry and soft-start. To ensure a consistent, quality finish, the 36-position speed dial allows the user to precisely match the tool rpm to the bit diameter while the premium electronic feedback circuitry maintains speed and power under load. For controlled start-ups and reduced motor wear, the 5625-20 router also features a reliable electronic soft-start. Fully-loaded for production free-hand and router table routing, the router features Milwaukee's exclusive linear height adjustment system with above-the-table access, providing fast, precise coarse adjustments to within 1/8 in. and micro-fine adjustments to within 1/64 in. Unlike helical systems, the motor doesn&rsquot spin as the height is changed, ensuring that the motor controls and power cord remain in a constant, optimal position. The revolutionary system can be accessed from above a router table with the included T-wrench or any 3/8 in. hex socket wrench with extension, eliminating the need for awkward, below the table adjustments or the need for an auxiliary router lift. With an industry standard bolt-hole pattern and router base diameter along with removable handles for insert plate clearance, the 5625-20 readily converts any existing table or production jig set-up. For added protection when table-mounted, the router features an exclusive motor contamination shield that keeps damaging debris out without sacrificing airflow. The router also features a durable, rubber shield for dust-free access to the height adjustment system. For maximum operator control and comfort, the 5625-20 router has impact-resistant, tactile-grip handles set wide apart and angled forward. A heavy-duty, 22 amp switch and speed control dial positions are conveniently located to allow the operator full motor control while keeping both hands on the tool. The router features a durable, machined aluminum motor housing and base along with premium 1/2 in. self-releasing collet, 100% sealed ball bearings and a durable 8 ft. power cord with flexible strain relief for years of accurate, reliable operation.
Qty:
Part #:729-5376-20
- Business Unit Tools. Product Level 1 Tools Corded. Product Level 2 Tools Drilling & Driving. Product Level 3 TOL Hammer Drills. Product Level 5 TOL Blank. AX Item Number 537620. Country of Origin CHN. Harmonized Tariff 8467210070.:
Qty:
Part #:729-2902-20
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Drilling & Driving. Product Level 3 TOL Hammer Drills. Product Level 4 TOL Blank. Product Level 5 TOL Blank. AX Item Number 290220. Country of Origin MEX. Harmonized Tariff 8467210070.:
Qty:
Part #:834-626731000
- Cutting extraction hood CED 125 Plus (626731000)
Extraction hood with plunge function and optimized flow channel for particularly low-dust cutting both indoors and outdoors
Compact construction form table can be removed without tools for more flexibility when working close to walls and improved visibility for freehand cuts
Cutting depth adjustable without tools max. cutting depth for freehand cuts 27 mm, with table 25 mm, with guide rail 20 mm
Robust sheet metal table for tilt-proof operation. Connection for dust extraction Ø 35/41 mm
Anti-static plastic prevents electric charging and dust accumulations for a constantly high suction power
Large, colored operating elements for simple, tool-free adjustment, even when wearing gloves
Sheet metal table with guide rollers for easy, precise feed. Protect delicate surfaces from scratches.
Enables the use of a Metabo precision guide rail for making cuts with great precision
Scope of delivery incl. two hole nut 5/8" and M 14.
Cordless Angle Grinder Suitable for W..18 LT BL 11-125, W..18 LTX BL 15-125 Quick
Plug-in Angle Grinder Suitable for all Metabo angle grinders with a diameter of 125mm, except for W 650, W 750, W.. 850, WQ 1000, W 1100, W 1150, WP 1200-125 RT, WEV 1500-125 RT, WE 1500-125 RT
Qty:
Displaying: 1 - 16 of 16 Matching Items